# Simplified Chinese messages for PSPP. # Copyright (C) 2015 Free Software Foundation, Inc. # This file is distributed under the same license as the pspp package. # Shulin Yang , 2015. # msgid "" msgstr "" "Project-Id-Version: pspp-1.0.1\n" "Report-Msgid-Bugs-To: pspp-dev@gnu.org\n" "POT-Creation-Date: 2026-03-04 10:01-0800\n" "PO-Revision-Date: 2017-08-29 16:17+0800\n" "Last-Translator: Shulin Yang \n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 2.0.3\n" #: gl/clean-temp.c:237 msgid "cannot find a temporary directory, try setting $TMPDIR" msgstr "" #: gl/clean-temp.c:252 #, fuzzy, c-format #| msgid "failed to create temporary directory during clipboard operation" msgid "cannot create a temporary directory using template \"%s\"" msgstr "剪贴版操作时创建临时目录失败" #: gl/clean-temp.c:373 #, fuzzy, c-format #| msgid "Could not create temporary file for %s." msgid "cannot remove temporary directory %s" msgstr "无法为%s创建临时文件。" #: gl/clean-temp-simple.c:270 #, fuzzy, c-format #| msgid "Could not create temporary file for %s." msgid "cannot remove temporary file %s" msgstr "无法为%s创建临时文件。" #: gl/error.c:208 #, fuzzy #| msgid "Unknown system variable %s." msgid "Unknown system error" msgstr "未知系统变量%s。" #: gl/getopt.c:282 #, c-format msgid "%s: option '%s%s' is ambiguous\n" msgstr "" #: gl/getopt.c:288 #, c-format msgid "%s: option '%s%s' is ambiguous; possibilities:" msgstr "" #: gl/getopt.c:322 #, fuzzy, c-format #| msgid "%s: unknown option `%s'" msgid "%s: unrecognized option '%s%s'\n" msgstr "%s: 未知选项 `%s'" #: gl/getopt.c:348 #, c-format msgid "%s: option '%s%s' doesn't allow an argument\n" msgstr "" #: gl/getopt.c:363 #, c-format msgid "%s: option '%s%s' requires an argument\n" msgstr "" #: gl/getopt.c:624 #, fuzzy, c-format #| msgid "%s: unknown option `%s'" msgid "%s: invalid option -- '%c'\n" msgstr "%s: 未知选项 `%s'" #: gl/getopt.c:639 gl/getopt.c:685 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "" #: gl/version-etc.c:73 #, c-format msgid "Packaged by %s (%s)\n" msgstr "" #: gl/version-etc.c:76 #, c-format msgid "Packaged by %s\n" msgstr "" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: gl/version-etc.c:83 msgid "(C)" msgstr "" #. TRANSLATORS: The %s placeholder is the web address of the GPL license. #: gl/version-etc.c:88 #, c-format msgid "" "License GPLv3+: GNU GPL version 3 or later <%s>.\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" msgstr "" #. TRANSLATORS: %s denotes an author name. #: gl/version-etc.c:105 #, fuzzy, c-format #| msgid "Filter by %s" msgid "Written by %s.\n" msgstr "通过%s过滤" #. TRANSLATORS: Each %s denotes an author name. #: gl/version-etc.c:109 #, c-format msgid "Written by %s and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #: gl/version-etc.c:113 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:120 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:127 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, or %s" msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "要求%s、%s、%s、%s或%s" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:134 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, or %s" msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "要求%s、%s、%s、%s、%s或%s" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:142 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, %s, or %s" msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "要求%s、%s、%s、%s、%s、%s或%s" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:150 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, %s, %s, or %s" msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "要求%s、%s、%s、%s、%s、%s、%s或%s" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:159 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, %s, %s, or %s" msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "要求%s、%s、%s、%s、%s、%s、%s或%s" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gl/version-etc.c:170 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, %s, %s, or %s" msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "要求%s、%s、%s、%s、%s、%s、%s或%s" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: gl/version-etc.c:249 #, c-format msgid "Report bugs to: %s\n" msgstr "" #: gl/version-etc.c:251 #, c-format msgid "Report %s bugs to: %s\n" msgstr "" #: gl/version-etc.c:255 gl/version-etc.c:257 #, c-format msgid "%s home page: <%s>\n" msgstr "" #: gl/version-etc.c:260 #, c-format msgid "General help using GNU software: <%s>\n" msgstr "" #: gl/xalloc-die.c:34 msgid "memory exhausted" msgstr "" #: gl/xbinary-io.c:36 msgid "failed to set file descriptor text/binary mode" msgstr "" #: gl/regcomp.c:122 #, fuzzy #| msgid "Success (%.*g)" msgid "Success" msgstr "成功(%.*g)" #: gl/regcomp.c:125 #, fuzzy #| msgid "No matching %s." msgid "No match" msgstr "找不到%s。" #: gl/regcomp.c:128 #, fuzzy #| msgid "Bad regular expression: %s" msgid "Invalid regular expression" msgstr "正则表达式错误：%s" #: gl/regcomp.c:131 #, fuzzy #| msgid "Invalid integer." msgid "Invalid collation character" msgstr "非整数。" #: gl/regcomp.c:134 #, fuzzy #| msgid "Invalid variable name `%s'." msgid "Invalid character class name" msgstr "变量名称有误`%s'。" #: gl/regcomp.c:137 msgid "Trailing backslash" msgstr "" #: gl/regcomp.c:140 msgid "Invalid back reference" msgstr "" #: gl/regcomp.c:143 msgid "Unmatched [, [^, [:, [., or [=" msgstr "" #: gl/regcomp.c:146 msgid "Unmatched ( or \\(" msgstr "" #: gl/regcomp.c:149 msgid "Unmatched \\{" msgstr "" #: gl/regcomp.c:152 msgid "Invalid content of \\{\\}" msgstr "" #: gl/regcomp.c:155 #, fuzzy #| msgid "Invalid cell range `%s'" msgid "Invalid range end" msgstr "无效的数据格范围`%s'" #: gl/regcomp.c:158 msgid "Memory exhausted" msgstr "" #: gl/regcomp.c:161 #, fuzzy #| msgid "Bad regular expression: %s" msgid "Invalid preceding regular expression" msgstr "正则表达式错误：%s" #: gl/regcomp.c:164 #, fuzzy #| msgid "Bad regular expression: %s" msgid "Premature end of regular expression" msgstr "正则表达式错误：%s" #: gl/regcomp.c:167 #, fuzzy #| msgid "Regular expression Match" msgid "Regular expression too big" msgstr "正刚表达式匹配" #: gl/regcomp.c:170 msgid "Unmatched ) or \\)" msgstr "" #: gl/regcomp.c:650 #, fuzzy #| msgid "Bad regular expression: %s" msgid "No previous regular expression" msgstr "正则表达式错误：%s" #: src/data/any-reader.c:72 src/data/encrypted-file.c:78 #, c-format msgid "An error occurred while opening `%s': %s." msgstr "打开操作出错`%s': %s。" #: src/data/any-reader.c:93 src/language/lexer/lexer.c:2690 #, c-format msgid "Error reading `%s': %s." msgstr "读取错误`%s': %s。" #: src/data/any-reader.c:114 #, c-format msgid "`%s' is not a system or portable file." msgstr "`%s'非系统或便携格式文件。" #: src/data/any-reader.c:123 src/data/any-writer.c:67 msgid "The inline file is not allowed here." msgstr "此处不能使用内联文件。" #: src/data/any-reader.c:205 #, c-format msgid "Cannot read from dataset %s because no dictionary or data has been written to it yet." msgstr "数字集%s未包含字典或数据，无法读取数据。" #: src/data/any-reader.c:260 src/language/commands/dataset.c:255 msgid "Dataset" msgstr "数据集" #: src/data/calendar.c:130 src/language/expressions/helpers.c:49 #, fuzzy, c-format #| msgid "Date %04d-%d-%d is before the earliest acceptable date of 1582-10-15." msgid "Date %04d-%d-%d is before the earliest supported date 1582-10-15." msgstr "日期%04d-%d-%d早于系统可接受最早日期1582年10月15日。" #: src/data/calendar.c:133 src/language/expressions/helpers.c:53 #, fuzzy, c-format #| msgid "Month %d is not in acceptable range of 0 to 13." msgid "Month %d is not in the acceptable range of 0 to 13." msgstr "月份%d超出介于0-13间的正常范围。" #: src/data/calendar.c:136 src/language/expressions/helpers.c:56 #, fuzzy, c-format #| msgid "Day %d is not in acceptable range of 0 to 31." msgid "Day %d is not in the acceptable range of 0 to 31." msgstr "日期%d超出介于0-31间的正常范围。" #: src/data/casereader-filter.c:221 msgid "At least one case in the data read had a weight value that was user-missing, system-missing, zero, or negative. These case(s) were ignored." msgstr "读取的数据中至少有一个个案因其权重值缺失或小于等于零而被忽略。" #. TRANSLATORS: this fragment will be interpolated into messages in fh_lock() #. that identify types of files. #: src/data/csv-file-writer.c:138 msgid "CSV file" msgstr "CSV文件" #: src/data/csv-file-writer.c:146 #, fuzzy, c-format #| msgid "Error opening `%s' for writing as a system file: %s." msgid "Error opening `%s' for writing as a CSV file: %s." msgstr "系统文件`%s'读写错误：%s。" #: src/data/csv-file-writer.c:454 #, c-format msgid "An I/O error occurred writing CSV file `%s'." msgstr "写入CSV文件`%s'时出现读/写错误。" #: src/data/data-in.c:179 #, c-format msgid "Data is not valid as format %s: %s" msgstr "数据格式不符%s: %s" #: src/data/data-in.c:381 src/data/data-in.c:557 msgid "Field contents are not numeric." msgstr "字段内容不是数字。" #: src/data/data-in.c:383 src/data/data-in.c:559 msgid "Number followed by garbage." msgstr "数字后含无效内容。" #: src/data/data-in.c:396 msgid "Invalid numeric syntax." msgstr "数字语法无效。" #: src/data/data-in.c:404 src/data/data-in.c:575 msgid "Too-large number set to system-missing." msgstr "系统缺失数字值设置过大。" #: src/data/data-in.c:410 src/data/data-in.c:581 msgid "Too-small number set to zero." msgstr "零值设置过小。" #: src/data/data-in.c:430 msgid "All characters in field must be digits." msgstr "字段中的字符必须为数字。" #: src/data/data-in.c:449 msgid "Unrecognized character in field." msgstr "字段中含有无法识别字符。" #: src/data/data-in.c:470 src/data/data-in.c:733 msgid "Field must have even length." msgstr "字段长度须为偶数值。" #: src/data/data-in.c:472 src/data/data-in.c:736 msgid "Field must contain only hex digits." msgstr "字段只能为16进制数字。" #: src/data/data-in.c:548 msgid "Invalid zoned decimal syntax." msgstr "区位十进制数据无效。" #: src/data/data-in.c:648 src/data/data-in.c:654 msgid "Invalid syntax for P field." msgstr "P字段语法无效。" #: src/data/data-in.c:772 src/data/data-in.c:822 msgid "Syntax error in date field." msgstr "日期字段语法错误。" #: src/data/data-in.c:787 #, c-format msgid "Day (%ld) must be between 1 and 31." msgstr "日期值(%ld)须在范围1~31间。" #: src/data/data-in.c:836 msgid "Delimiter expected between fields in date." msgstr "日期字段间须有分隔符。" #: src/data/data-in.c:910 msgid "Unrecognized month format. Months may be specified as Arabic or Roman numerals or as at least 3 letters of their English names." msgstr "无法识别月份。可用阿拉伯数字、罗马数字或月份英文名称的至少前3个字母表示。" #: src/data/data-in.c:937 #, c-format msgid "Year (%ld) must be between 1582 and 19999." msgstr "年份(%ld)值的有效范围为1582到19999。" #: src/data/data-in.c:948 #, c-format msgid "Trailing garbage `%.*s' following date." msgstr "日期之后带有无效信息`%.*s'。" #: src/data/data-in.c:962 msgid "Julian day must have exactly three digits." msgstr "儒略日须由三位数字组成。" #: src/data/data-in.c:964 #, c-format msgid "Julian day (%ld) must be between 1 and 366." msgstr "儒略日(%ld)的取值范围为1到366。" #: src/data/data-in.c:988 #, c-format msgid "Quarter (%ld) must be between 1 and 4." msgstr "季度(%ld) 值范围为1到4." #: src/data/data-in.c:1009 #, c-format msgid "Week (%ld) must be between 1 and 53." msgstr "周数值(%ld) 范围为1到53." #: src/data/data-in.c:1021 msgid "Delimiter expected between fields in time." msgstr "时间字段间必须要有分隔符。" #: src/data/data-in.c:1041 #, c-format msgid "Minute (%ld) must be between 0 and 59." msgstr "分钟(%ld) 的范围为0到59." #: src/data/data-in.c:1079 msgid "Unrecognized weekday name. At least the first two letters of an English weekday name must be specified." msgstr "无法识别平日名称。用平日的英文至少前两位字母来表示该平日。" #: src/data/data-in.c:1214 #, c-format msgid "`%c' expected in date field." msgstr "日期字段应含有`%c'。" #: src/data/data-out.c:585 #, c-format msgid "Weekday number %f is not between 1 and 7." msgstr "表示平日的数字%f超出区间1到7。" #: src/data/data-out.c:610 #, c-format msgid "Month number %f is not between 1 and 12." msgstr "月份数字%f 超出区间1到12。" #. TRANSLATORS: this fragment will be interpolated into #. messages in fh_lock() that identify types of files. #: src/data/dataset-writer.c:65 src/language/commands/file-handle.c:315 msgid "dataset" msgstr "数据集" #: src/data/dict-class.c:52 msgid "ordinary" msgstr "普通" #: src/data/dict-class.c:54 msgid "system" msgstr "系统" #: src/data/dict-class.c:56 msgid "scratch" msgstr "草稿" #. TRANSLATORS: "bytes" is correct, not characters due to UTF encoding #: src/data/dictionary.c:1463 #, c-format msgid "Truncating document line to %d bytes." msgstr "将文件行截短到%d字节。" #: src/data/encrypted-file.c:89 #, c-format msgid "An error occurred while reading `%s': %s." msgstr "读取`%s'时出现错误： %s。" #: src/data/encrypted-file.c:430 #, c-format msgid "%s: encrypted file corrupted (ends in incomplete %u-byte ciphertext block)" msgstr "" #: src/data/encrypted-file.c:449 #, c-format msgid "%s: encrypted file corrupted (ends with bad padding)" msgstr "" #: src/data/file-handle-def.c:281 src/language/commands/dataset.c:268 msgid "active dataset" msgstr "当前数据集" #: src/data/file-handle-def.c:550 #, c-format msgid "Can't read from %s as a %s because it is already being read as a %s." msgstr "因%s已经存在，无法将%s再次读取为%s。" #: src/data/file-handle-def.c:554 #, c-format msgid "Can't write to %s as a %s because it is already being written as a %s." msgstr "因%s已经存在，无法将%s写入为%s。" #: src/data/file-handle-def.c:561 #, c-format msgid "Can't re-open %s as a %s." msgstr "无法将%s再次打开为%s。" #: src/data/file-name.c:134 #, c-format msgid "Not opening pipe file `%s' because %s option set." msgstr "已设置%s，将不打开管道文件`%s'。" #: src/data/format.c:364 #, c-format msgid "Format %s may not be used for input." msgstr "格式%s可能无法用于输入。" #: src/data/format.c:370 #, fuzzy, c-format #| msgid "%s specifies width %d, but %s requires an even width." msgid "Input format %s specifies width %d, but %s requires an even width." msgstr "%s的宽度为%d，而%s要求使用偶宽度。" #: src/data/format.c:373 #, fuzzy, c-format #| msgid "%s specifies width %d, but %s requires an even width." msgid "Output format %s specifies width %d, but %s requires an even width." msgstr "%s的宽度为%d，而%s要求使用偶宽度。" #: src/data/format.c:382 #, fuzzy, c-format #| msgid "%s %s specifies width %d, but %s requires a width between %d and %d." msgid "Input format %s specifies width %d, but %s requires a width between %d and %d." msgstr "%s %s的宽度为%d，而%s要求的宽度范围介于%d到%d间。" #: src/data/format.c:385 #, fuzzy, c-format #| msgid "%s %s specifies width %d, but %s requires a width between %d and %d." msgid "Output format %s specifies width %d, but %s requires a width between %d and %d." msgstr "%s %s的宽度为%d，而%s要求的宽度范围介于%d到%d间。" #: src/data/format.c:393 #, fuzzy, c-format #| msgid "%s %s specifies %d decimal place, but %s does not allow any decimals." #| msgid_plural "%s %s specifies %d decimal places, but %s does not allow any decimals." msgid "Input format %s specifies %d decimal place, but %s does not allow any decimals." msgid_plural "Input format %s specifies %d decimal places, but %s does not allow any decimals." msgstr[0] "%s %s具有%d的小数位数，而%s不允许使用小数。" #: src/data/format.c:401 #, fuzzy, c-format #| msgid "%s %s specifies %d decimal place, but %s does not allow any decimals." #| msgid_plural "%s %s specifies %d decimal places, but %s does not allow any decimals." msgid "Output format %s specifies %d decimal place, but %s does not allow any decimals." msgid_plural "Output format %s specifies %d decimal places, but %s does not allow any decimals." msgstr[0] "%s %s具有%d的小数位数，而%s不允许使用小数。" #: src/data/format.c:412 #, fuzzy, c-format #| msgid "%s %s specifies %d decimal place, but the given width allows at most %d decimals." #| msgid_plural "%s %s specifies %d decimal places, but the given width allows at most %d decimals." msgid "Input format %s specifies %d decimal place, but width %d allows at most %d decimals." msgid_plural "Input format %s specifies %d decimal places, but width %d allows at most %d decimals." msgstr[0] "%s %s 含有 %d 位小数，但其宽度最多能容纳 %d 位小数。" #: src/data/format.c:419 #, fuzzy, c-format #| msgid "%s %s specifies %d decimal place, but the given width allows at most %d decimals." #| msgid_plural "%s %s specifies %d decimal places, but the given width allows at most %d decimals." msgid "Output format %s specifies %d decimal place, but width %d allows at most %d decimals." msgid_plural "Output format %s specifies %d decimal places, but width %d allows at most %d decimals." msgstr[0] "%s %s 含有 %d 位小数，但其宽度最多能容纳 %d 位小数。" #: src/data/format.c:428 #, fuzzy, c-format #| msgid "%s %s specifies %d decimal place, but the given width does not allow for any decimals." #| msgid_plural "%s %s specifies %d decimal places, but the given width does not allow for any decimals." msgid "Input format %s specifies %d decimal place, but width %d does not allow for any decimals." msgid_plural "Input format %s specifies %d decimal places, but width %d does not allow for any decimals." msgstr[0] "%s %s 含有 %d 位小数，但其宽度不允许包含小数。" #: src/data/format.c:435 #, fuzzy, c-format #| msgid "%s %s specifies %d decimal place, but the given width does not allow for any decimals." #| msgid_plural "%s %s specifies %d decimal places, but the given width does not allow for any decimals." msgid "Output format %s specifies %d decimal place, but width %d does not allow for any decimals." msgid_plural "Output format %s specifies %d decimal places, but width %d does not allow for any decimals." msgstr[0] "%s %s 含有 %d 位小数，但其宽度不允许包含小数。" #: src/data/format.c:507 #, fuzzy, c-format #| msgid "String variable with width %d is not compatible with format %s." msgid "String variable %s is not compatible with numeric format %s." msgstr "字符串变量宽度%d与格式%s不匹配。" #: src/data/format.c:510 #, fuzzy, c-format #| msgid "%s variables are not compatible with %s format %s." msgid "String variables are not compatible with numeric format %s." msgstr "%s变量与%s格式%s不匹配。" #: src/data/format.c:516 #, fuzzy, c-format #| msgid "%s variables are not compatible with %s format %s." msgid "Numeric variable %s is not compatible with string format %s." msgstr "%s变量与%s格式%s不匹配。" #: src/data/format.c:519 #, fuzzy, c-format #| msgid "%s variables are not compatible with %s format %s." msgid "Numeric variables are not compatible with string format %s." msgstr "%s变量与%s格式%s不匹配。" #: src/data/format.c:559 #, fuzzy, c-format #| msgid "String variable with width %d is not compatible with format %s." msgid "String variable %s with width %d is not compatible with format %s. Use format %s instead." msgstr "字符串变量宽度%d与格式%s不匹配。" #: src/data/format.c:564 #, fuzzy, c-format #| msgid "String variable with width %d is not compatible with format %s." msgid "String variable with width %d is not compatible with format %s. Use format %s instead." msgstr "字符串变量宽度%d与格式%s不匹配。" #: src/data/format.c:1159 src/language/command.def:101 #: src/ui/gui/var-type-dialog.ui:48 msgid "Numeric" msgstr "数字" #: src/data/format.c:1162 src/ui/gui/var-type-dialog.ui:65 msgid "Comma" msgstr "逗号" #: src/data/format.c:1165 src/ui/gui/var-type-dialog.ui:82 msgid "Dot" msgstr "点号" #: src/data/format.c:1168 msgid "Scientific" msgstr "科学" #: src/data/format.c:1185 src/ui/gui/var-type-dialog.ui:116 msgid "Date" msgstr "日期" #: src/data/format.c:1188 src/ui/gui/var-type-dialog.ui:133 msgid "Dollar" msgstr "美元" #: src/data/format.c:1195 src/ui/gui/options.ui:361 msgid "Custom" msgstr "自定义" #: src/data/format.c:1198 src/language/command.def:106 #: src/ui/gui/var-type-dialog.ui:167 msgid "String" msgstr "字符串" #: src/data/gnumeric-reader.c:649 src/data/ods-reader.c:612 #, c-format msgid "Cannot convert the value in the spreadsheet cell %s to format (%s): %s" msgstr "无法将表中单元格%s的值转换为(%s): %s格式" #: src/data/gnumeric-reader.c:673 src/data/ods-reader.c:683 #, c-format msgid "There was a problem whilst reading the %s file `%s' (near line %d): `%s'" msgstr "读取%s文件`%s'在行%d附近出现错误：`%s'" #: src/data/gnumeric-reader.c:703 src/data/ods-reader.c:722 #, c-format msgid "Invalid cell range `%s'" msgstr "无效的数据格范围`%s'" #: src/data/gnumeric-reader.c:873 src/data/ods-reader.c:744 #: src/data/ods-reader.c:868 #, c-format msgid "Selected sheet or range of spreadsheet `%s' is empty." msgstr "工作表或其选择范围`%s'为空。" #: src/data/gnumeric-reader.c:1103 #, c-format msgid "The gnumeric file `%s' is encoded as %s instead of the usual UTF-8 encoding. Any non-ascii characters will be incorrectly imported." msgstr "Gnumeric文件%s的为%s编码而不是UTF-8编码，非ASCII字符可能无法正确导入。" #: src/data/identifier2.c:73 #, fuzzy, c-format #| msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary." msgid "Identifier `%s' is not valid in encoding `%s' used for this dictionary." msgstr "%s到%s不符合语法，字典中%s先于%s出现。" #: src/data/identifier2.c:88 #, c-format msgid "`%s' is not valid here because this identifier must start with `$'." msgstr "" #: src/data/identifier2.c:92 #, c-format msgid "`%s' is not valid here because this identifier must start with `#'." msgstr "" #: src/data/identifier2.c:96 #, c-format msgid "`%s' is not valid here because this identifier must start with `$' or `#'." msgstr "" #: src/data/identifier2.c:107 #, c-format msgid "`%s' and other identifiers starting with `$' are not valid here." msgstr "" #: src/data/identifier2.c:111 #, c-format msgid "`%s' and other identifiers starting with `#' are not valid here." msgstr "" #: src/data/identifier2.c:117 #, c-format msgid "Identifier `%s' exceeds %d-byte limit." msgstr "识别符`%s'超过%d字节限制。" #: src/data/identifier2.c:139 msgid "Identifier cannot be empty string." msgstr "识别符不能为空字符。" #: src/data/identifier2.c:143 #, c-format msgid "`%s' may not be used as an identifier because it is a reserved word." msgstr "`%s'为系统保留字，不能作为识别符使用。" #: src/data/identifier2.c:152 #, c-format msgid "`%s' may not be used as an identifier because it contains ill-formed UTF-8 at byte offset %tu." msgstr "`%s'在%tu字节处与UTF-8编码不符，不能作为识别符使用。" #: src/data/identifier2.c:163 #, fuzzy, c-format #| msgid "Character %s (in `%s') may not appear as the first character in a identifier." msgid "Character %s (in `%s') may not appear as the first character in an identifier." msgstr "不能使用`%s'中的字符%s作为识别符的第一个字符。" #: src/data/identifier2.c:174 #, c-format msgid "Character %s (in `%s') may not appear in an identifier." msgstr "`%s'中的字符%s不能用于识别符。" #: src/data/mdd-writer.c:241 #, fuzzy, c-format #| msgid "I/O error occurred writing data file `%s'." msgid "An I/O error occurred writing metadata file `%s'." msgstr "写入数据文件`%s'时发生读写错误。" #. TRANSLATORS: this fragment will be interpolated into #. messages in fh_lock() that identify types of files. #: src/data/mdd-writer.c:456 #, fuzzy #| msgid "data file" msgid "metadata file" msgstr "数据文件" #: src/data/mdd-writer.c:464 #, fuzzy, c-format #| msgid "Error opening `%s' for writing as a portable file: %s." msgid "Error opening `%s' for writing as a metadata file: %s." msgstr "将文件`%s' 打开为便携格式文件以写入时出错：%s。" #: src/data/mdd-writer.c:472 #, c-format msgid "Internal error creating xmlTextWriter. Please report this to %s." msgstr "" #: src/data/make-file.c:217 #, c-format msgid "Opening %s for writing: %s." msgstr "打开%s以写入数据：%s。" #: src/data/make-file.c:228 #, c-format msgid "Opening stream for %s: %s." msgstr "给%s打开数据流：%s。" #: src/data/make-file.c:260 #, c-format msgid "Creating temporary file to replace %s: %s." msgstr "新建临时文件以替代%s: %s。" #: src/data/make-file.c:277 #, c-format msgid "Creating temporary file %s: %s." msgstr "创建临时文件 %s: %s。" #: src/data/make-file.c:289 #, c-format msgid "Opening stream for temporary file %s: %s." msgstr "为临时文件%s打开数据流:%s。" #: src/data/make-file.c:326 #, c-format msgid "Replacing %s by %s: %s." msgstr "将%s替换为%s: %s。" #: src/data/make-file.c:354 #, c-format msgid "Removing %s: %s." msgstr "移除%s: %s。" #: src/data/ods-reader.c:1064 #, c-format msgid "Cannot open %s as a OpenDocument file: %s" msgstr "不能将%s以OpenDocument文件形式打开：%s" #: src/data/ods-reader.c:1073 #, fuzzy, c-format #| msgid "Cannot open %s as a OpenDocument file: %s" msgid "%s is not an OpenDocument file." msgstr "不能将%s以OpenDocument文件形式打开：%s" #. TRANSLATORS: this fragment will be interpolated into #. messages in fh_lock() that identify types of files. #: src/data/pc+-file-reader.c:206 msgid "SPSS/PC+ system file" msgstr "SPSS/PC+系统文件" #: src/data/pc+-file-reader.c:215 #, c-format msgid "Error opening `%s' for reading as an SPSS/PC+ system file: %s." msgstr "打开SPSS/PC+系统文件`%s'时出现错误：%s。" #: src/data/pc+-file-reader.c:224 src/data/sys-file-reader.c:3600 #, c-format msgid "%s: stat failed (%s)." msgstr "%s: 状态统计失败 (%s)." #: src/data/pc+-file-reader.c:230 #, c-format msgid "%s: file too large." msgstr "%s：文件太大。" #: src/data/pc+-file-reader.c:257 #, c-format msgid "Directory entry is for a %u-byte record starting at offset %u but file is only %u bytes long." msgstr "目录项为%u-字节记录，从偏移量%u处开始，但文件长度仅%u字节。" #: src/data/pc+-file-reader.c:275 #, c-format msgid "Directory fields have unexpected values (%u,%u)." msgstr "目录字段含有预期范围之外的值(%u, %u)。" #: src/data/pc+-file-reader.c:372 src/data/sys-file-reader.c:682 #, c-format msgid "Variable %zu" msgstr "变量 %zu" #: src/data/pc+-file-reader.c:380 src/data/sys-file-reader.c:690 #, c-format msgid "Variable %zu Label" msgstr "变量 %zu 标签" #: src/data/pc+-file-reader.c:385 #, c-format msgid "Variable %zu Value Label %zu" msgstr "变量 %zu 值标签%zu" #: src/data/pc+-file-reader.c:388 src/data/sys-file-reader.c:700 msgid "Creation Date" msgstr "创建日期" #: src/data/pc+-file-reader.c:389 src/data/sys-file-reader.c:701 msgid "Creation Time" msgstr "创建时间" #: src/data/pc+-file-reader.c:390 src/data/sys-file-reader.c:702 #: src/language/commands/sys-file-info.c:201 msgid "Product" msgstr "产品" #: src/data/pc+-file-reader.c:391 src/data/sys-file-reader.c:703 #: src/language/command.def:29 src/language/commands/sys-file-info.c:295 msgid "File Label" msgstr "文件标签" #: src/data/pc+-file-reader.c:419 #, c-format msgid "Using default encoding %s to read this SPSS/PC+ system file. For best results, specify an encoding explicitly. Use SYSFILE INFO with ENCODING=\"DETECT\" to analyze the possible encodings." msgstr "将使用默认的编码%s来打开SPSS/PC+系统文件。为得到最佳处理结果，请指定一个编码。可以使用含ENCODING=\"DETECT\"的SYSFILE INFO命令来分析文件可能使用的编码。" #: src/data/pc+-file-reader.c:471 src/data/sys-file-reader.c:901 #, c-format msgid "Error closing system file `%s': %s." msgstr "关闭系统文件时出现错误`%s': %s。" #: src/data/pc+-file-reader.c:532 msgid "This is not an SPSS/PC+ system file." msgstr "该文件不是SPSS/PC+系统文件。" #: src/data/pc+-file-reader.c:536 #, c-format msgid "Record 0 has unexpected length %u." msgstr "记录0的长度%u与预期不符。" #: src/data/pc+-file-reader.c:560 #, c-format msgid "Record 0 specifies unexpected system missing value %g (%a)." msgstr "记录0指定意外时系统缺失值%g (%a)。" #: src/data/pc+-file-reader.c:565 #, c-format msgid "Record 0 reserved fields have unexpected values (%u,%u,%u,%u,%u,%u)." msgstr "记录0的保留字段值(%u,%u,%u,%u,%u,%u)与预期不符。" #: src/data/pc+-file-reader.c:569 #, c-format msgid "Record 0 case counts differ (%u versus %u)." msgstr "记录0的个案数有差异(%u对%u)。" #: src/data/pc+-file-reader.c:573 #, c-format msgid "Invalid compression type %u." msgstr "不支持压缩类型%u。" #: src/data/pc+-file-reader.c:584 #, c-format msgid "Record 0 claims %u cases with %u values per case (requiring at least %zu bytes) but data record is only %u bytes long." msgstr "记录0应该包含%u个案，每个案%u个值（需至少%zu字节），但数据记录长度仅为%u字节。" #: src/data/pc+-file-reader.c:606 #, c-format msgid "Value labels claimed to end at offset %u in labels record but labels record is only %u bytes." msgstr "值标签在标签记录中应结束于偏移量%u处，但标签记录仅为%u字节。" #: src/data/pc+-file-reader.c:617 #, c-format msgid "Value labels claimed to be at offset %u with length %u but file size is only %u bytes." msgstr "值标签应位于偏移%u处，长度为%u，但文件大小仅为%u字节。" #: src/data/pc+-file-reader.c:644 #, c-format msgid "Value labels end with partial label (%u bytes left in record, label length %)." msgstr "值标签的末尾标签值不完整(记录尚剩余%u字节，标签长度为%)" #: src/data/pc+-file-reader.c:657 #, c-format msgid "%u leftover bytes following value labels." msgstr "值标签后有%u字节空间。" #: src/data/pc+-file-reader.c:673 #, c-format msgid "Variable label claimed to start at offset %u in labels record but labels record is only %u bytes." msgstr "变量标签在标签记录中应于偏移量%u处开始，但标签记录仅%u字节。" #: src/data/pc+-file-reader.c:685 #, c-format msgid "Variable label with length %u starting at offset %u in labels record overruns end of %u-byte labels record." msgstr "变量标签长度为%u（开始于偏移量%u处）大于标签记录的长度%u。" #: src/data/pc+-file-reader.c:707 #, c-format msgid "Record 1 has length %u (expected %u)." msgstr "记录1长度为%u（要求为%u）。" #: src/data/pc+-file-reader.c:739 #, c-format msgid "Variable %u has invalid type %." msgstr "变量%u的类型%无效。" #: src/data/pc+-file-reader.c:775 #, c-format msgid "Invalid weight index %u." msgstr "加权指数%u不符要求。" #: src/data/pc+-file-reader.c:848 #, c-format msgid "Invalid variable name `%s'." msgstr "变量名称有误`%s'。" #: src/data/pc+-file-reader.c:856 #, c-format msgid "Renaming variable with duplicate name `%s' to `%s'." msgstr "将重复的变量名称`%s'重命名为`%s'。" #: src/data/pc+-file-reader.c:866 #, c-format msgid "Cannot weight by string variable `%s'." msgstr "字符串变量 `%s'不能用于加权操作。" #: src/data/pc+-file-reader.c:963 src/data/sys-file-reader.c:2820 msgid "File ends in partial case." msgstr "文件结束于不完整个案。" #: src/data/pc+-file-reader.c:969 #, c-format msgid "Case beginning at offset 0x%08x extends past end of data record at offset 0x%08x." msgstr "始于0x%08x处的个案长度超过数据记录末尾的偏移量0x%08x。" #: src/data/pc+-file-reader.c:988 src/data/sys-file-reader.c:2828 #, c-format msgid "Error reading case from file %s." msgstr "从文件%s读取个案时出现错误。" #: src/data/pc+-file-reader.c:1104 src/data/sys-file-reader.c:2991 #, c-format msgid "Possible compressed data corruption: string contains compressed integer (opcode %d)." msgstr "压缩数据可能已损坏：字符串含有压缩过整数(操作 %d)。" #: src/data/pc+-file-reader.c:1146 src/data/sys-file-reader.c:3292 #, c-format msgid "`%s' near offset 0x%llx: " msgstr "`%s'位于偏移量0x%llx附近:" #: src/data/pc+-file-reader.c:1149 src/data/sys-file-reader.c:3295 #, c-format msgid "`%s': " msgstr "`%s': " #: src/data/pc+-file-reader.c:1202 src/data/sys-file-reader.c:3347 #, c-format msgid "System error: %s." msgstr "系统错误：%s。" #: src/data/pc+-file-reader.c:1207 src/data/sys-file-reader.c:3352 msgid "Unexpected end of file." msgstr "文件意外结束。" #: src/data/pc+-file-reader.c:1292 src/data/sys-file-reader.c:3577 #, c-format msgid "%s: seek failed (%s)." msgstr "%s: 查找失败 (%s)." #: src/data/pc+-file-reader.c:1342 msgid "SPSS/PC+ System File" msgstr "SPSS/PC+ 系统文件" #: src/data/por-file-reader.c:109 #, c-format msgid "portable file %s corrupt at offset 0x%llx: " msgstr "便携格式%s于偏量值0x%llx:处损坏：" #: src/data/por-file-reader.c:137 #, c-format msgid "reading portable file %s at offset 0x%llx: " msgstr "打开便携格式%s，偏移量位置为0x%llx:" #: src/data/por-file-reader.c:166 #, c-format msgid "Error closing portable file `%s': %s." msgstr "关闭便携文件出错`%s': %s。" #: src/data/por-file-reader.c:218 #, fuzzy #| msgid "Unexpected end of file." msgid "Unexpected end of file" msgstr "文件意外结束。" #. TRANSLATORS: this fragment will be interpolated into #. messages in fh_lock() that identify types of files. #: src/data/por-file-reader.c:277 src/data/por-file-writer.c:147 msgid "portable file" msgstr "便携格式文件" #: src/data/por-file-reader.c:285 #, c-format msgid "An error occurred while opening `%s' for reading as a portable file: %s." msgstr "打开便携格式`%s'时出错：%s。" #: src/data/por-file-reader.c:306 msgid "Data record expected." msgstr "要求输入数据记录。" #: src/data/por-file-reader.c:404 msgid "Number expected." msgstr "要求输入数字。" #: src/data/por-file-reader.c:432 msgid "Missing numeric terminator." msgstr "缺少数字终止符。" #: src/data/por-file-reader.c:455 msgid "Invalid integer." msgstr "非整数。" #: src/data/por-file-reader.c:466 src/data/por-file-reader.c:486 #, c-format msgid "Bad string length %d." msgstr "字符串长度%d不符。" #: src/data/por-file-reader.c:549 #, c-format msgid "%s: Not a portable file." msgstr "%s: 不是便携格式。" #: src/data/por-file-reader.c:566 #, c-format msgid "Unrecognized version code `%c'." msgstr "版本代码`%c'无法识别。" #: src/data/por-file-reader.c:579 #, c-format msgid "Bad date string length %zu." msgstr "日期字串长度有误%zu。" #: src/data/por-file-reader.c:581 #, c-format msgid "Bad time string length %zu." msgstr "时间字串长度有误%zu。" #: src/data/por-file-reader.c:644 #, c-format msgid "Numeric variable %s has invalid format specifier %s." msgstr "数字变量%s的格式设置%s有误。" #: src/data/por-file-reader.c:648 #, c-format msgid "String variable %s with width %d has invalid format specifier %s." msgstr "字符串变量%s(宽度为%d)的格式设置有误%s。" #: src/data/por-file-reader.c:656 #, c-format msgid "%s: Bad format specifier byte (%d). Variable will be assigned a default format." msgstr "%s：指定格式字节(%d)有误，变量将使用默认格式。" #: src/data/por-file-reader.c:675 msgid "Expected variable count record." msgstr "要求变量数量记录。" #: src/data/por-file-reader.c:679 #, c-format msgid "Invalid number of variables %d." msgstr "变量数量有误%d。" #: src/data/por-file-reader.c:688 #, c-format msgid "Weight variable name (%s) truncated." msgstr "权重变量名称%s已被截短。" #: src/data/por-file-reader.c:703 msgid "Expected variable record." msgstr "要求变量记录。" #: src/data/por-file-reader.c:707 #, c-format msgid "Invalid variable width %d." msgstr "变量宽度%d有误。" #: src/data/por-file-reader.c:714 src/data/sys-file-reader.c:1426 #, c-format msgid "Bad width %d for variable %s." msgstr "变量宽度%d（变量%s）有误。" #: src/data/por-file-reader.c:718 #, fuzzy, c-format #| msgid "Duplicate variable name %s in position %d renamed to %s." msgid "Invalid or duplicate variable name %s in position %d renamed to %s." msgstr "重复变量名%s(位于%d)，更名为%s。" #: src/data/por-file-reader.c:766 #, c-format msgid "Weighting variable %s not present in dictionary." msgstr "字典中权重变量%s不存在。" #: src/data/por-file-reader.c:810 #, c-format msgid "Unknown variable %s while parsing value labels." msgstr "变量%s在标签值中不存在。" #: src/data/por-file-reader.c:813 #, c-format msgid "Cannot assign value labels to %s and %s, which have different variable types." msgstr "由于变量类型不同，不能将标签值赋与%s和%s。" #: src/data/por-file-reader.c:949 msgid "SPSS Portable File" msgstr "SPSS便携格式文件" #: src/data/por-file-writer.c:139 #, c-format msgid "Invalid decimal digits count %d. Treating as %d." msgstr "小数位数%d有误，视为%d处理。" #: src/data/por-file-writer.c:159 #, c-format msgid "Error opening `%s' for writing as a portable file: %s." msgstr "将文件`%s' 打开为便携格式文件以写入时出错：%s。" #: src/data/por-file-writer.c:505 #, c-format msgid "An I/O error occurred writing portable file `%s'." msgstr "写入便携格式时出现I/O错误：`%s' 。" #: src/data/psql-reader.c:48 msgid "Support for reading postgres databases was not compiled into this installation of PSPP" msgstr "PSPP没有安装Postgres数据库读取模块" #: src/data/psql-reader.c:236 msgid "Memory error whilst opening psql source" msgstr "打开psql源时发生内存错误" #: src/data/psql-reader.c:242 #, c-format msgid "Error opening psql source: %s." msgstr "打开psql源时出现错误：%s。" #: src/data/psql-reader.c:257 #, c-format msgid "Postgres server is version %s. Reading from versions earlier than 8.0 is not supported." msgstr "Postgres服务器版本为%s，不支持从8.0以前版本读取数据。" #: src/data/psql-reader.c:277 msgid "Connection is unencrypted, but unencrypted connections have not been permitted." msgstr "不允许未加密的连接。" #: src/data/psql-reader.c:317 src/data/psql-reader.c:341 #: src/data/psql-reader.c:351 #, c-format msgid "Error from psql source: %s." msgstr "psql源错误：%s。" #: src/data/psql-reader.c:446 #, c-format msgid "Unsupported OID %d. SYSMIS values will be inserted." msgstr "未支持的OID值%d。将使用SYSMIS值来代替。" #: src/data/settings.c:401 msgid "MXWARNS set to zero. No further warnings will be given even when potentially problematic situations are encountered." msgstr "MXWARNS设置为零。当出现问题时将不再提示警告信息。" #: src/data/settings.c:408 #, c-format msgid "Warnings re-enabled. %d warnings will be issued before aborting syntax processing." msgstr "警告信息已激活，在放弃语法处理前将提示%d警告信息。" #: src/data/settings.c:620 #, fuzzy, c-format #| msgid "%s: Custom currency string `%s' does not contain exactly three periods or commas (or it contains both)." msgid "Custom currency string `%s' for %s does not contain exactly three periods or commas (or it contains both)." msgstr "%s: 自定义货币字符 `%s' 未包含正好三个句号或逗号（或同时含有句号和逗号）。" #. TRANSLATORS: this fragment will be interpolated into #. messages in fh_lock() that identify types of files. #: src/data/sys-file-reader.c:410 src/data/sys-file-writer.c:245 msgid "system file" msgstr "系统文件" #: src/data/sys-file-reader.c:417 #, c-format msgid "Error opening `%s' for reading as a system file: %s." msgstr "打开系统文件`%s'时出现错误：%s。" #: src/data/sys-file-reader.c:494 msgid "Misplaced type 4 record." msgstr "类型4记录错位。" #: src/data/sys-file-reader.c:499 msgid "Duplicate type 6 (document) record." msgstr "类型6（文档）记录重复。" #: src/data/sys-file-reader.c:509 src/data/sys-file-reader.c:1354 #, c-format msgid "Unrecognized record type 7, subtype %d. For help, please send this file to %s and mention that you were using %s." msgstr "记录类型7无法识别，子类型为%d。若需帮助，请将这个文件发送到%s并注明您在使用%s。" #: src/data/sys-file-reader.c:529 #, c-format msgid "Record type 7, subtype %d found here has the same type as the record found near offset 0x%llx. For help, please send this file to %s and mention that you were using %s." msgstr "此处子类型%d的记录类型7与偏移量 0x%llx处的记录为同一类型。若需帮助，请将这个文件发送到%s并注明您在使用%s。" #: src/data/sys-file-reader.c:541 #, c-format msgid "Unrecognized record type %d." msgstr "记录类型%d无法识别。" #: src/data/sys-file-reader.c:698 #, c-format msgid "Value Label %zu" msgstr "变量标签 %zu" #: src/data/sys-file-reader.c:707 msgid "Extra Product Info" msgstr "更多产品信息" #: src/data/sys-file-reader.c:720 #, c-format msgid "Document Line %zu" msgstr "文件行%zu" #: src/data/sys-file-reader.c:728 #, c-format msgid "MRSET %zu" msgstr "多重响应集（MRSET） %zu" #: src/data/sys-file-reader.c:730 #, c-format msgid "MRSET %zu Label" msgstr "多重响应集（MRSET） %zu 标签" #: src/data/sys-file-reader.c:735 #, c-format msgid "MRSET %zu Counted Value" msgstr "多重响应集（MRSET）%zu 数量" #: src/data/sys-file-reader.c:773 #, c-format msgid "This system file does not indicate its own character encoding. Using default encoding %s. For best results, specify an encoding explicitly. Use SYSFILE INFO with ENCODING=\"DETECT\" to analyze the possible encodings." msgstr "该系统文件没有字符编码信息。将使用默认的编码%s。为得到最佳处理结果，请指定一个编码。可以使用含ENCODING=\"DETECT\"的SYSFILE INFO命令来分析文件可能使用的编码。" #: src/data/sys-file-reader.c:857 #, c-format msgid "File header claims %d variable positions but %zu were read from file." msgstr "文件头指定%d变量位置，而文件中实际读取到%zu。" #: src/data/sys-file-reader.c:969 src/data/sys-file-reader.c:983 msgid "This is not an SPSS system file." msgstr "该文件不是SPSS系统文件。" #: src/data/sys-file-reader.c:1038 msgid "Compression bias is not the usual value of 100, or system file uses unrecognized floating-point format." msgstr "压缩偏值不是常用的100，系统文件可能使用了无法识别的浮点格式。" #: src/data/sys-file-reader.c:1113 msgid "Variable label indicator field is not 0 or 1." msgstr "变量标签指示字段值非0或1。" #: src/data/sys-file-reader.c:1126 msgid "Numeric missing value indicator field is not -3, -2, 0, 1, 2, or 3." msgstr "数字缺失指示字段值不在下列值中： -3, -2, 0, 1, 2, 3。" #: src/data/sys-file-reader.c:1136 msgid "String missing value indicator field is not 0, 1, 2, or 3." msgstr "字符串缺失值提示字段不等于下列任一值：0, 1, 2, 3。" #: src/data/sys-file-reader.c:1163 #, c-format msgid "Invalid number of labels %u." msgstr "标签数量有误%u。" #: src/data/sys-file-reader.c:1196 msgid "Variable index record (type 4) does not immediately follow value label record (type 3) as it should." msgstr "变量索引记录（类型4）没有按照要求紧接于变量值的标签记录（类型3）之后。" #: src/data/sys-file-reader.c:1208 #, c-format msgid "Number of variables associated with a value label (%u) is not between 1 and the number of variables (%zu)." msgstr "与变量值标签(%u)相对应的变量数量没有处于范围1和变量数目(%zu)之间。" #: src/data/sys-file-reader.c:1235 #, c-format msgid "Number of document lines (%d) must be greater than 0 and less than %d." msgstr "文件的行数(%d)必须大于0且小于%d。" #: src/data/sys-file-reader.c:1328 #, c-format msgid "Record type 7, subtype %d has bad size %u (expected %d)." msgstr "变量类型7的亚类型%d大小%u有误（要求为%d）。" #: src/data/sys-file-reader.c:1332 #, c-format msgid "Record type 7, subtype %d has bad count %u (expected %d)." msgstr "变量类型7的亚类型%d数量%u有误（要求%d）。" #: src/data/sys-file-reader.c:1434 #, fuzzy, c-format #| msgid "Renaming variable with duplicate name `%s' to `%s'." msgid "Renaming variable with invalid or duplicate name `%s' to `%s'." msgstr "将重复的变量名称`%s'重命名为`%s'。" #: src/data/sys-file-reader.c:1504 msgid "Missing string continuation record." msgstr "缺少字符串连续记录。" #: src/data/sys-file-reader.c:1537 #, c-format msgid "Variable %s with width %d has invalid print format 0x%x." msgstr "变量%s（宽度%d）输出格式有误0x%x。" #: src/data/sys-file-reader.c:1541 #, c-format msgid "Variable %s with width %d has invalid write format 0x%x." msgstr "变量%s(宽度为%d)的写入格式有误0x%x。" #: src/data/sys-file-reader.c:1546 msgid "Suppressing further invalid format warnings." msgstr "不再提示错误格式。" #: src/data/sys-file-reader.c:1600 #, c-format msgid "Floating-point representation indicated by system file (%d) differs from expected (%d)." msgstr "系统文件(%d)提供的浮点格式与要求的格式(%d)不同。" #: src/data/sys-file-reader.c:1616 #, c-format msgid "Integer format indicated by system file (%d) differs from expected (%d)." msgstr "系统文件(%d)提供的整数格式与要求的格式(%d)不同。" #: src/data/sys-file-reader.c:1634 src/data/sys-file-reader.c:1640 #, c-format msgid "File specifies unexpected value %g (%a) as %s, instead of %g (%a)." msgstr "文件指定的值%g (%a)为%s，与要求的%g (%a)不一致。" #: src/data/sys-file-reader.c:1649 #, c-format msgid "File specifies unexpected value %g (%a) as %s, instead of %g (%a) or %g (%a)." msgstr "文件指定的值%g (%a)为%s，与要求的%g (%a)或%g (%a)不一致。" #: src/data/sys-file-reader.c:1701 src/data/sys-file-reader.c:1720 #, c-format msgid "Missing space following `%c' at offset %zu in MRSETS record." msgstr "多重响应数据集(MRSETS)在`%c'后 缺少空格，该处的偏移量为%zu。" #: src/data/sys-file-reader.c:1728 #, fuzzy, c-format #| msgid "Unexpected label source value following `E' at offset %zu in MRSETS record." msgid "Missing label source value following `E' at offset %zu in MRSETS record." msgstr "多重响应数据集(MRSETS)的`E'之后标签源值与要求不符，该处的偏移量为%zu。" #: src/data/sys-file-reader.c:1735 #, c-format msgid "Unexpected label source value following `E' at offset %zu in MRSETS record." msgstr "多重响应数据集(MRSETS)的`E'之后标签源值与要求不符，该处的偏移量为%zu。" #: src/data/sys-file-reader.c:1742 #, c-format msgid "Missing `C', `D', or `E' at offset %zu in MRSETS record." msgstr "多重响应数据集(MRSETS)缺少`C', `D' 或 `E'，该处的偏移量为%zu。" #: src/data/sys-file-reader.c:1769 #, c-format msgid "Missing new-line parsing variable names at offset %zu in MRSETS record." msgstr "多重响应数据集(MRSETS)在偏移量%zu处缺少换行解析变量名称。" #: src/data/sys-file-reader.c:1804 #, c-format msgid "Invalid multiple response set name `%s'." msgstr "多重响应集名称%s无效。" #: src/data/sys-file-reader.c:1837 #, c-format msgid "MRSET %s contains duplicate variable name %s." msgstr "多重响应数据集(MRSETS)%s含有重复的变量名称%s。" #: src/data/sys-file-reader.c:1852 #, c-format msgid "MRSET %s contains both string and numeric variables." msgstr "多重响应数据集(MRSETS)%s同时含有字符串变量和数字变量。" #: src/data/sys-file-reader.c:1864 #, c-format msgid "MRSET %s has no variables." msgstr "多重响应数据集(MRSETS)%s中没有变量。" #: src/data/sys-file-reader.c:1866 #, c-format msgid "MRSET %s has only one variable." msgstr "多重响应数据集(MRSETS)%s只有一个变量。" #: src/data/sys-file-reader.c:1910 #, c-format msgid "Extension 11 has bad count %u (for %zu variables)." msgstr "扩展11数量%u有误(共%zu个变量)。" #: src/data/sys-file-reader.c:1943 #, c-format msgid "Invalid variable display parameters for variable %zu (%s). Default parameters substituted." msgstr "变量 %zu (%s)的显示参数有误，使用默认参数代替。" #: src/data/sys-file-reader.c:1987 #, c-format msgid "Duplicate long variable name `%s'." msgstr "长变量名`%s'重复。" #: src/data/sys-file-reader.c:2039 #, c-format msgid "Long variable mapping from %s to invalid variable name `%s'." msgstr "将%s用长变量映射为不合语法的`%s'。" #: src/data/sys-file-reader.c:2073 #, c-format msgid "%s listed as string of invalid length %s in very long string record." msgstr "超长字符串记录中的字符串%s的长度%s有误。" #: src/data/sys-file-reader.c:2084 #, c-format msgid "%s listed in very long string record with width %s, which requires only one segment." msgstr "%s作为宽度为%s的非常长字符串记录列出，而该宽度仅需一个节段。" #: src/data/sys-file-reader.c:2092 #, c-format msgid "Very long string %s overflows dictionary." msgstr "长字符串%s溢出字典。" #: src/data/sys-file-reader.c:2110 #, c-format msgid "Very long string with width %ld has segment %d of width %d (expected %d)." msgstr "宽度%ld的长字符串具节段%d，宽度为%d（预期为%d）。" #: src/data/sys-file-reader.c:2167 #, fuzzy, c-format #| msgid "Variable index %d not in valid range 1...%zu." msgid "Value label variable index %d not in valid range 1...%zu." msgstr "变量索引%d的超出有效范围1...%zu。" #: src/data/sys-file-reader.c:2177 #, fuzzy, c-format #| msgid "Variable index %d refers to long string continuation." msgid "Value label variable index %d refers to long string continuation." msgstr "变量索引%d指向长字符串连续性。" #: src/data/sys-file-reader.c:2192 #, c-format msgid "Variables associated with value label are not all of identical type. Variable %s is %s, but variable %s is %s." msgstr "变量与相应的标签值类型不一致。变量%s为%s，而变量%s为%s。" #: src/data/sys-file-reader.c:2196 src/data/sys-file-reader.c:2198 #: src/language/commands/apply-dictionary.c:74 #: src/language/commands/apply-dictionary.c:75 msgid "numeric" msgstr "数字" #: src/data/sys-file-reader.c:2196 src/data/sys-file-reader.c:2198 #: src/language/commands/apply-dictionary.c:74 #: src/language/commands/apply-dictionary.c:75 msgid "string" msgstr "字符串" #: src/data/sys-file-reader.c:2210 #, c-format msgid "Value labels may not be added to long string variables (e.g. %s) using records types 3 and 4." msgstr "值标签可能无法使用记录类型3和4添加到长字串变量(例如：%s)中。" #: src/data/sys-file-reader.c:2239 #, c-format msgid "Duplicate value label for %g on %s." msgstr "值标签%g于%s上重复。" #: src/data/sys-file-reader.c:2244 src/data/sys-file-reader.c:2591 #, c-format msgid "Duplicate value label for `%.*s' on %s." msgstr "值标签`%.*s'于%s上重复。" #: src/data/sys-file-reader.c:2267 #, fuzzy, c-format #| msgid "Suppressed %d additional related warnings." msgid "Suppressed %d additional warnings for value labels." msgstr "%d的相关警告没有显示。" #: src/data/sys-file-reader.c:2281 #, fuzzy, c-format #| msgid "Variable index %d not in valid range 1...%zu." msgid "Weight variable index %d not in valid range 1...%zu. Treating file as unweighted." msgstr "变量索引%d的超出有效范围1...%zu。" #: src/data/sys-file-reader.c:2291 #, fuzzy, c-format #| msgid "Variable index %d refers to long string continuation." msgid "Weight variable index %d refers to long string continuation. Treating file as unweighted." msgstr "变量索引%d指向长字符串连续性。" #: src/data/sys-file-reader.c:2299 #, c-format msgid "Ignoring string variable `%s' set as weighting variable." msgstr "忽略作为权重变量的字符串变量`%s'。" #: src/data/sys-file-reader.c:2336 #, c-format msgid "Error parsing attribute value %s[%d]." msgstr "特征值解析错误%s[%d]。" #: src/data/sys-file-reader.c:2350 #, c-format msgid "Attribute value %s[%d] is not quoted: %s." msgstr "特征值%s[%d]没有被引用：%s。" #: src/data/sys-file-reader.c:2363 #, c-format msgid "Duplicate attribute %s." msgstr "特征%s重复。" #: src/data/sys-file-reader.c:2447 #, c-format msgid "Invalid role for variable %s." msgstr "变量%s角色错误。" #: src/data/sys-file-reader.c:2456 #, c-format msgid "%zu other variables had invalid roles." msgstr "%zu的其他变量角色无效。" #: src/data/sys-file-reader.c:2478 #, c-format msgid "Extension record subtype %d ends unexpectedly." msgstr "扩展变量子类型%d意外结束。" #: src/data/sys-file-reader.c:2522 #, c-format msgid "Ignoring long string value label record for unknown variable %s." msgstr "未知变量%s，忽略长字串值标签记录。" #: src/data/sys-file-reader.c:2527 #, c-format msgid "Ignoring long string value label record for numeric variable %s." msgstr "忽略数字变量%s的长字串值标签记录。" #: src/data/sys-file-reader.c:2534 #, c-format msgid "Ignoring long string value label record for variable %s because the record's width (%d) does not match the variable's width (%d)." msgstr "忽略变量%s的长字串值标签记录，因其宽度(%d)与变量宽度(%d)不符。" #: src/data/sys-file-reader.c:2564 #, c-format msgid "Ignoring long string value label %zu for variable %s, with width %d, that has bad value width %zu." msgstr "忽略长字串值标签%zu，因变量%s(宽度%d)变量宽度%zu不正确。" #: src/data/sys-file-reader.c:2638 #, c-format msgid "Long string missing values record says variable %s has %d missing values, but only 1 to 3 missing values are allowed." msgstr "长字符串缺失值记录显示变量%s有%d个缺失值，而系统只允许1至3个缺失值。" #: src/data/sys-file-reader.c:2648 #, c-format msgid "Ignoring long string missing value record for unknown variable %s." msgstr "忽略未知变量%s的长字符串缺失值记录。" #: src/data/sys-file-reader.c:2653 #, c-format msgid "Ignoring long string missing value record for numeric variable %s." msgstr "忽略数字变量%s的长字符串缺失值记录。" #: src/data/sys-file-reader.c:2677 msgid "This file has corrupted metadata written by a buggy version of PSPP. To fix it, save a new copy of the file." msgstr "" #: src/data/sys-file-reader.c:2693 #, c-format msgid "Ignoring long string missing value %zu for variable %s, with width %d, that has bad value width %zu." msgstr "忽略长字串值标签%zu，因变量%s(宽度%d)变量宽度%zu不正确。" #: src/data/sys-file-reader.c:2745 #, fuzzy, c-format #| msgid "Variable %s appears twice in variable list." msgid "Variable set %s contains unknown variable %s." msgstr "%s在列表中重复出现。" #: src/data/sys-file-reader.c:2798 msgid "File ends in partial string value." msgstr "文件结束于不完整字符串值。" #: src/data/sys-file-reader.c:2937 msgid "Possible compressed data corruption: compressed spaces appear in numeric field." msgstr "压缩的数据可能已损坏：压缩空间出现于数字字段。" #: src/data/sys-file-reader.c:3088 #, c-format msgid "Suppressed %d additional related warnings." msgstr "%d的相关警告没有显示。" #: src/data/sys-file-reader.c:3134 src/data/sys-file-reader.c:3151 #, c-format msgid "Dictionary record refers to unknown variable %s." msgstr "字典记录指向未知变量%s。" #: src/data/sys-file-reader.c:3217 #, c-format msgid "Expecting digit at offset %zu in MRSETS record." msgstr "多重响应记录在偏移量%zu处应为数字。" #: src/data/sys-file-reader.c:3225 #, c-format msgid "Expecting space at offset %zu in MRSETS record." msgstr "多重响应记录在偏移量%zu处应为空格。" #: src/data/sys-file-reader.c:3233 #, c-format msgid "%zu-byte string starting at offset %zu exceeds record length %zu." msgstr "%zu字节的字符串从偏移量%zu开始处超过记录长度%zu。" #: src/data/sys-file-reader.c:3243 #, c-format msgid "Expecting space at offset %zu following %zu-byte string." msgstr "偏移量%zu处应为紧接于%zu-字节字符串后的空格。" #: src/data/sys-file-reader.c:3535 #, c-format msgid "Wrong ZLIB data header offset %#llx (expected %#llx)." msgstr "ZLIB数据头偏移错误%#llx(应为%#llx)." #: src/data/sys-file-reader.c:3543 #, c-format msgid "Impossible ZLIB trailer offset 0x%llx." msgstr "错误的ZLIB尾端偏移0x%llx." #: src/data/sys-file-reader.c:3550 #, c-format msgid "Invalid ZLIB trailer length %lld." msgstr "ZLIB尾端长度错误%lld." #: src/data/sys-file-reader.c:3614 #, c-format msgid "End of ZLIB trailer (0x%llx) is not file size (0x%llx)." msgstr "ZLIB尾端(0x%llx)结束处不是文件大小(0x%llx)." #: src/data/sys-file-reader.c:3624 #, c-format msgid "ZLIB trailer bias (%lld) differs from file header bias (%.2f)." msgstr "ZLIB尾端偏量(%lld)与文件头偏量(%.2f)不符。" #: src/data/sys-file-reader.c:3634 #, c-format msgid "ZLIB trailer \"zero\" field has nonzero value %lld." msgstr "ZLIB尾端\"zero\"字段含有非零值%lld。" #: src/data/sys-file-reader.c:3640 #, c-format msgid "ZLIB trailer specifies unexpected %u-byte block size." msgstr "ZLIB尾端含有不符合要求的%u字节块。" #: src/data/sys-file-reader.c:3648 #, c-format msgid "%lld-byte ZLIB trailer specifies %u data blocks (expected %lld)." msgstr "ZLIB尾端%lld-字节含有%u数据块（应该为%lld）。" #: src/data/sys-file-reader.c:3673 #, c-format msgid "ZLIB block descriptor %u reported uncompressed data offset %#llx, when %#llx was expected." msgstr "ZLIB块描述%u发现%#llx的未压缩数据偏移，应该为%#llx。" #: src/data/sys-file-reader.c:3682 #, c-format msgid "ZLIB block descriptor %u reported compressed data offset %#llx, when %#llx was expected." msgstr "ZLIB块描述%u发现%#llx的压缩数据偏移，应该为%#llx。" #: src/data/sys-file-reader.c:3692 #, c-format msgid "ZLIB block descriptor %u reported block size %#x, when %#x was expected." msgstr "ZLIB块描述%u的区块尺寸为%#x，应该为%#x。" #: src/data/sys-file-reader.c:3700 #, c-format msgid "ZLIB block descriptor %u reported block size %#x, when at most %#x was expected." msgstr "ZLIB块描述%u的区块尺寸为%#x，而最大值为%#x。" #: src/data/sys-file-reader.c:3712 #, c-format msgid "ZLIB block descriptor %u reports compressed size %u and uncompressed size %u." msgstr "ZLIB块描述%u中的压缩尺寸为%u，未压缩尺寸为%u。" #: src/data/sys-file-reader.c:3724 #, c-format msgid "ZLIB trailer is at offset %#llx but %#llx would be expected from block descriptors." msgstr "ZLIB尾端位于偏移量%#llx处，根据区块描述其大小应为%#llx。" #: src/data/sys-file-reader.c:3743 #, c-format msgid "ZLIB initialization failed (%s)." msgstr "ZLIB初始化失败(%s)。" #: src/data/sys-file-reader.c:3758 #, c-format msgid "Inconsistency at end of ZLIB stream (%s)." msgstr "ZLIB流结束处数据前后矛盾(%s)。" #: src/data/sys-file-reader.c:3817 #, c-format msgid "ZLIB stream inconsistency (%s)." msgstr "ZLIB流数据前后矛盾(%s)。" #: src/data/sys-file-reader.c:3841 msgid "Unexpected end of ZLIB compressed data." msgstr "ZLIB压缩数据结束处不符要求。" #: src/data/sys-file-reader.c:3879 msgid "SPSS System File" msgstr "SPSS系统文件" #: src/data/sys-file-writer.c:211 #, c-format msgid "Unknown system file version %d. Treating as version %d." msgstr "未知系统文件版本%d。将其作为版本%d处理。" #: src/data/sys-file-writer.c:256 #, c-format msgid "Error opening `%s' for writing as a system file: %s." msgstr "系统文件`%s'读写错误：%s。" #: src/data/sys-file-writer.c:1316 #, c-format msgid "An I/O error occurred writing system file `%s'." msgstr "写入系统文件显示出现输入/输出错误`%s'。" #: src/data/sys-file-writer.c:1423 #, c-format msgid "Failed to initialize ZLIB for compression (%s)." msgstr "ZLIB压缩初始化失败(%s)。" #: src/data/sys-file-writer.c:1452 #, c-format msgid "Failed to complete ZLIB stream compression (%s)." msgstr "无法完成ZLIB流压缩(%s)。" #: src/data/sys-file-writer.c:1494 #, c-format msgid "ZLIB stream compression failed (%s)." msgstr "ZLIB流压缩失败(%s)。" #: src/data/sys-file-writer.c:1536 #, c-format msgid "%s: Seek failed (%s)." msgstr "%s: 查找失败(%s)。" #: src/data/variable.c:58 msgid "Left" msgstr "左" #: src/data/variable.c:59 msgid "Right" msgstr "右" #: src/data/variable.c:60 msgid "Center" msgstr "中心" #: src/data/variable.c:66 src/language/commands/set.c:1241 #: src/language/commands/sys-file-info.c:208 #: src/language/commands/sys-file-info.c:217 #: src/language/commands/sys-file-info.c:224 msgid "Unknown" msgstr "未知" #: src/data/variable.c:67 msgid "Nominal" msgstr "名称上" #: src/data/variable.c:68 msgid "Ordinal" msgstr "顺序上" #: src/data/variable.c:69 src/language/commands/ks-one-sample.c:300 msgid "Scale" msgstr "比例" #: src/data/variable.c:75 msgid "Input" msgstr "输入" #. TRANSLATORS: This will be part of a filename. Please avoid whitespace. #: src/data/variable.c:76 src/output/output-item.c:470 #: src/output/spv/spv-writer.c:211 src/ui/gui/psppire-output-window.c:519 msgid "Output" msgstr "输出" #: src/data/variable.c:77 src/ui/gui/examine.ui:269 msgid "Both" msgstr "同时" #: src/data/variable.c:78 src/language/commands/sys-file-info.c:238 #: src/ui/gui/psppire-dialog-action-crosstabs.c:86 #: src/ui/gui/psppire-dialog-action-crosstabs.c:98 #: src/ui/gui/psppire-dialog-action-crosstabs.c:133 #: src/ui/gui/psppire-dialog-action-crosstabs.c:141 #: src/ui/gui/psppire-variable-sheet.c:416 src/ui/gui/var-display.c:34 #: src/ui/gui/examine.ui:598 src/ui/gui/examine.ui:691 #: src/ui/gui/options.ui:304 src/ui/gui/text-data-import.ui:494 msgid "None" msgstr "无" #: src/data/variable.c:79 msgid "Partition" msgstr "划分" #: src/data/variable.c:80 src/ui/gui/reliability.ui:33 msgid "Split" msgstr "切割" #: src/data/variable.c:726 #, c-format msgid "%s (%s)" msgstr "%s (%s)" #: src/data/variable.c:1351 msgid "At least one case in the data file had a weight value that was user-missing, system-missing, zero, or negative. These case(s) were ignored." msgstr "数据文件中至少有一个个案因其权重值缺失或小于等于零而被忽略。" #: src/language/command.c:212 src/language/commands/graph.c:698 #: src/language/commands/graph.c:705 src/language/commands/graph.c:712 #: src/language/commands/graph.c:749 src/language/commands/graph.c:755 #: src/language/commands/graph.c:761 src/language/commands/graph.c:820 #: src/language/commands/graph.c:826 src/language/commands/graph.c:832 #: src/language/commands/graph.c:838 src/language/commands/graph.c:844 #: src/language/commands/graph.c:850 src/language/commands/graph.c:856 #: src/language/commands/set.c:311 #, c-format msgid "%s is not yet implemented." msgstr "%s尚未实现。" #: src/language/command.c:218 #, c-format msgid "%s may be used only in testing mode." msgstr "%s可能仅用于测试模式。" #: src/language/command.c:225 #, c-format msgid "%s may be used only in enhanced syntax mode." msgstr "%s可能仅用于增强语法模式。" #: src/language/command.c:357 #, fuzzy #| msgid "expecting command name" msgid "Syntax error expecting command name." msgstr "输入指令名称" #: src/language/command.c:360 #, c-format msgid "Unknown command `%s'." msgstr "未知指令`%s'。" #: src/language/command.c:392 #, c-format msgid "%s is allowed only before the active dataset has been defined." msgstr "%s操作仅可在选定数据集之前进行。" #: src/language/command.c:395 #, c-format msgid "%s is allowed only after the active dataset has been defined." msgstr "%s操作仅可在选定数据集之后进行。" #: src/language/command.c:398 src/language/command.c:401 #, c-format msgid "%s is allowed only inside %s." msgstr "%s操作仅可在%s内进行。" #: src/language/command.c:407 src/language/command.c:411 #, c-format msgid "%s is allowed only before the active dataset has been defined or inside %s." msgstr "%s操作仅可在选定数据集之前或%s内进行。" #: src/language/command.c:415 src/language/command.c:419 #, c-format msgid "%s is allowed only after the active dataset has been defined or inside %s." msgstr "%s操作仅可在选定数据集之后或%s内进行。" #: src/language/command.c:423 #, c-format msgid "%s is allowed only inside %s or inside %s." msgstr "%s操作仅可在%s或%s内进行。" #: src/language/command.c:428 #, c-format msgid "%s is allowed only after the active dataset has been defined, inside INPUT PROGRAM, or inside FILE TYPE." msgstr "%s操作仅可在选定数据集之后或INPUT PROGRAM、FILE TYPE之内进行。" #: src/language/command.c:432 #, c-format msgid "%s is allowed only before the active dataset has been defined, inside INPUT PROGRAM, or inside FILE TYPE." msgstr "%s操作仅可在选定数据集之前或INPUT PROGRAM、FILE TYPE之内进行。" #: src/language/command.c:450 src/language/command.c:454 #, c-format msgid "%s is not allowed inside %s." msgstr "%s操作不能于%s内进行。" #: src/language/command.c:462 #, fuzzy, c-format #| msgid "%s is not allowed inside %s." msgid "%s is not allowed inside DO IF or LOOP." msgstr "%s操作不能于%s内进行。" #: src/language/command.c:466 #, fuzzy, c-format #| msgid "%s is not allowed inside %s." msgid "In INPUT PROGRAM, %s is not allowed inside DO IF or LOOP." msgstr "%s操作不能于%s内进行。" #: src/language/command.c:471 #, c-format msgid "%s is not allowed inside DO IF or LOOP (except inside INPUT PROGRAM)." msgstr "" #: src/language/command.c:558 src/language/commands/host.c:291 #: src/language/commands/permissions.c:49 #, c-format msgid "This command not allowed when the %s option is set." msgstr "当设置%s选项后不能运行此命令。" #: src/language/command.c:575 #, c-format msgid "Error removing `%s': %s." msgstr "移除`%s'时出现错误: %s。" #: src/language/command.def:18 msgid "Close File Handle" msgstr "" #: src/language/command.def:19 msgid "Cache" msgstr "" #: src/language/command.def:20 #, fuzzy #| msgid "D" msgid "CD" msgstr "D" #: src/language/command.def:21 #, fuzzy #| msgid "Define Groups" msgid "Define" msgstr "定义组" #: src/language/command.def:22 #, fuzzy #| msgid "Display _Names" msgid "Display Macros" msgstr "显示名称(_N)" #: src/language/command.def:23 msgid "Do Repeat" msgstr "" #: src/language/command.def:24 msgid "End Repeat" msgstr "" #: src/language/command.def:25 msgid "Echo" msgstr "" #: src/language/command.def:26 msgid "Erase" msgstr "" #: src/language/command.def:27 msgid "Exit" msgstr "" #: src/language/command.def:28 #, fuzzy #| msgid "File Label" msgid "File Handle" msgstr "文件标签" #: src/language/command.def:30 msgid "Finish" msgstr "" #: src/language/command.def:31 msgid "Host" msgstr "" #: src/language/command.def:32 #, fuzzy #| msgid "Included" msgid "Include" msgstr "包含" #: src/language/command.def:33 #, fuzzy #| msgid "_Insert Case" msgid "Insert" msgstr "插入个案(_I)" #: src/language/command.def:34 #, fuzzy #| msgid "_N of cases" msgid "N of Cases" msgstr "个案数量(_N)" #: src/language/command.def:35 src/language/commands/binomial.c:188 #: src/language/commands/cochran.c:189 src/language/commands/correlations.c:91 #: src/language/commands/correlations.c:149 #: src/language/commands/crosstabs.c:1069 #: src/language/commands/descriptives.c:956 src/language/commands/examine.c:910 #: src/language/commands/frequencies.c:1328 #: src/language/commands/friedman.c:251 #: src/language/commands/jonckheere-terpstra.c:368 #: src/language/commands/kruskal-wallis.c:266 #: src/language/commands/ks-one-sample.c:279 #: src/language/commands/logistic.c:1242 #: src/language/commands/mann-whitney.c:185 src/language/commands/mcnemar.c:223 #: src/language/commands/means-calc.c:439 src/language/commands/means.c:711 #: src/language/commands/median.c:351 src/language/commands/npar-summary.c:107 #: src/language/commands/oneway.c:981 src/language/commands/reliability.c:491 #: src/language/commands/sign.c:69 src/language/commands/sign.c:70 #: src/language/commands/t-test-indep.c:194 #: src/language/commands/t-test-one-sample.c:126 #: src/language/commands/t-test-paired.c:151 #: src/language/commands/t-test-paired.c:194 #: src/language/commands/wilcoxon.c:233 msgid "N" msgstr "N" #: src/language/command.def:36 #, fuzzy #| msgid "New Value" msgid "New File" msgstr "新值" #: src/language/command.def:37 #, fuzzy #| msgid "Output" msgid "Output Modify" msgstr "输出" #: src/language/command.def:38 #, fuzzy #| msgid "Regression" msgid "Permissions" msgstr "回归" #: src/language/command.def:39 #, fuzzy #| msgid "Observed" msgid "Preserve" msgstr "观测值" #: src/language/command.def:40 src/language/command.def:41 #, fuzzy #| msgid "_Quit" msgid "Quit" msgstr "退出(_Q)" #: src/language/command.def:42 msgid "Restore" msgstr "" #: src/language/command.def:43 #, fuzzy #| msgid "Select" msgid "Set" msgstr "选择" #: src/language/command.def:44 msgid "Show" msgstr "" #: src/language/command.def:45 msgid "Subtitle" msgstr "" #: src/language/command.def:46 msgid "Sysfile Info" msgstr "" #: src/language/command.def:47 src/output/output-item.c:737 msgid "Title" msgstr "" #: src/language/command.def:50 #, fuzzy #| msgid "All Files" msgid "Add Files" msgstr "所有文件" #: src/language/command.def:52 src/language/commands/list.c:81 #, fuzzy #| msgid "Dataset" msgid "Data List" msgstr "数据集" #: src/language/command.def:53 msgid "Get" msgstr "" #: src/language/command.def:54 #, fuzzy #| msgid "Data" msgid "Get Data" msgstr "数据" #: src/language/command.def:55 #, fuzzy #| msgid "Report" msgid "Import" msgstr "报告" #: src/language/command.def:56 #, fuzzy #| msgid "Input format" msgid "Input Program" msgstr "输入格式" #: src/language/command.def:57 #, fuzzy #| msgid "Text Files" msgid "Match Files" msgstr "文本文件" #: src/language/command.def:58 msgid "Matrix Data" msgstr "" #: src/language/command.def:59 msgid "Update" msgstr "" #: src/language/command.def:60 #, fuzzy #| msgid "Dataset" msgid "Dataset Activate" msgstr "数据集" #: src/language/command.def:61 #, fuzzy #| msgid "Dataset" msgid "Dataset Declare" msgstr "数据集" #: src/language/command.def:62 #, fuzzy #| msgid "Dataset" msgid "Dataset Close" msgstr "数据集" #: src/language/command.def:63 #, fuzzy #| msgid "Dataset" msgid "Dataset Copy" msgstr "数据集" #: src/language/command.def:64 #, fuzzy #| msgid "Dataset" msgid "Dataset Name" msgstr "数据集" #: src/language/command.def:65 #, fuzzy #| msgid "Cell Display" msgid "Dataset Display" msgstr "单元格显示" #: src/language/command.def:66 #, fuzzy #| msgid "Factor Matrix" msgid "Matrix" msgstr "因子矩阵" #: src/language/command.def:67 msgid "Matrix Convert" msgstr "" #: src/language/command.def:70 #, fuzzy #| msgid "Value Labels" msgid "Add Value Labels" msgstr "值标签" #: src/language/command.def:71 msgid "Add Document" msgstr "" #: src/language/command.def:72 msgid "Apply Dictionary" msgstr "" #: src/language/command.def:73 #, fuzzy #| msgid "Custom data file attributes." msgid "Datafile Attribute" msgstr "自定义数据文件特征。" #: src/language/command.def:74 src/ui/gui/examine.ui:317 #: src/ui/gui/factor.ui:444 src/ui/gui/histogram.ui:146 src/ui/gui/roc.ui:329 msgid "Display" msgstr "显示" #: src/language/command.def:75 #, fuzzy #| msgid "_Display summary tables" msgid "Display Variable Sets" msgstr "显示总结表(_D)" #: src/language/command.def:76 src/language/commands/sys-file-info.c:529 #, fuzzy #| msgid "Document Line %zu" msgid "Document" msgstr "文件行%zu" #: src/language/command.def:77 msgid "Drop Documents" msgstr "" #: src/language/command.def:78 #, fuzzy #| msgid "Format" msgid "Formats" msgstr "格式" #: src/language/command.def:79 msgid "Leave" msgstr "" #: src/language/command.def:80 src/language/commands/sys-file-info.c:565 #: src/ui/gui/psppire-var-info.c:53 src/ui/gui/psppire-var-sheet-header.c:73 #: src/ui/gui/missing-val-dialog.c:380 src/ui/gui/examine.ui:498 #: src/ui/gui/t-test.ui:104 msgid "Missing Values" msgstr "缺失值" #: src/language/command.def:81 src/language/commands/mrsets.c:568 msgid "Multiple Response Sets" msgstr "多重响应集" #: src/language/command.def:82 #, fuzzy #| msgid "Print Format" msgid "Print Formats" msgstr "打印格式" #: src/language/command.def:83 src/ui/gui/split-file.ui:25 msgid "Split File" msgstr "拆分文件" #: src/language/command.def:84 src/language/commands/sys-file-info.c:670 #: src/ui/gui/psppire-var-info.c:54 src/ui/gui/psppire-var-sheet-header.c:70 #: src/ui/gui/val-labs-dialog.c:489 src/ui/gui/val-labs-dialog.ui:194 msgid "Value Labels" msgstr "值标签" #: src/language/command.def:85 #, fuzzy #| msgid "Variable View" msgid "Variable Alignment" msgstr "变量视图" #: src/language/command.def:86 #, fuzzy #| msgid "Variable View" msgid "Variable Attribute" msgstr "变量视图" #: src/language/command.def:87 #, fuzzy #| msgid "Variable labels" msgid "Variable Labels" msgstr "变量标签" #: src/language/command.def:88 #, fuzzy #| msgid "Variable Label: " msgid "Variable Level" msgstr "变量标签：" #: src/language/command.def:89 #, fuzzy #| msgid "Variable labels" msgid "Variable Role" msgstr "变量标签" #: src/language/command.def:90 #, fuzzy #| msgid "Variable Lists" msgid "Variable Width" msgstr "变量列表" #: src/language/command.def:91 msgid "Vector" msgstr "向量" #: src/language/command.def:92 src/language/commands/sys-file-info.c:231 #, fuzzy #| msgid "Weight:" msgid "Weight" msgstr "权重：" #: src/language/command.def:93 #, fuzzy #| msgid "Write Format: %s\n" msgid "Write Formats" msgstr "写入格式：%s\n" #: src/language/command.def:96 msgid "Break" msgstr "" #: src/language/command.def:97 #, fuzzy #| msgid "_Compute..." msgid "Compute" msgstr "计算(_C)..." #: src/language/command.def:98 msgid "Do If" msgstr "" #: src/language/command.def:99 msgid "If" msgstr "" #: src/language/command.def:100 msgid "Loop" msgstr "" #: src/language/command.def:102 #, fuzzy #| msgid "Print Format" msgid "Print Eject" msgstr "打印格式" #: src/language/command.def:103 #, fuzzy #| msgid "Print tables" msgid "Print Space" msgstr "输出表格" #: src/language/command.def:104 #, fuzzy #| msgid "_Print" msgid "Print" msgstr "打印(_P)" #: src/language/command.def:105 #, fuzzy #| msgid "Record" msgid "Recode" msgstr "记录" #: src/language/command.def:107 msgid "Write" msgstr "" #: src/language/command.def:108 #, fuzzy #| msgid "_Export..." msgid "XExport" msgstr "导出(_E)..." #: src/language/command.def:109 #, fuzzy #| msgid "Save" msgid "XSave" msgstr "保存" #: src/language/command.def:112 #, fuzzy #| msgid "Select" msgid "Select If" msgstr "选择" #: src/language/command.def:115 #, fuzzy #| msgid "_Aggregate..." msgid "Aggregate" msgstr "汇总(_A)" #: src/language/command.def:116 #, fuzzy #| msgid "Automatic Recode" msgid "Autorecode" msgstr "自动重编码" #: src/language/command.def:117 #, fuzzy #| msgid "Creation Date" msgid "Begin Data" msgstr "创建日期" #: src/language/command.def:118 src/language/commands/crosstabs.c:73 #: src/language/commands/crosstabs.c:939 src/language/commands/ctables.c:330 #: src/language/commands/frequencies.c:1230 src/language/commands/graph.c:204 #: src/language/commands/quick-cluster.c:697 #: src/ui/gui/psppire-dialog-action-crosstabs.c:90 #: src/ui/gui/psppire-dialog-action-ctables.c:190 msgid "Count" msgstr "计数" #: src/language/command.def:119 src/ui/gui/crosstabs.ui:99 msgid "Crosstabs" msgstr "交叉表" #: src/language/command.def:120 #, fuzzy #| msgid "Print tables" msgid "Ctables" msgstr "输出表格" #: src/language/command.def:121 src/language/commands/correlations.c:120 msgid "Correlations" msgstr "相关" #: src/language/command.def:122 #, fuzzy #| msgid "Test _Variables" msgid "Delete Variables" msgstr "检验变量(_V)" #: src/language/command.def:123 src/language/commands/examine.c:722 #: src/language/commands/oneway.c:974 src/ui/gui/descriptives.ui:25 msgid "Descriptives" msgstr "描述统计" #: src/language/command.def:124 msgid "Examine" msgstr "" #: src/language/command.def:125 msgid "Execute" msgstr "" #: src/language/command.def:126 #, fuzzy #| msgid "_Export..." msgid "Export" msgstr "导出(_E)..." #: src/language/command.def:127 src/language/commands/factor.c:1558 #: src/language/commands/factor.c:1637 src/language/commands/factor.c:1699 msgid "Factor" msgstr "因子" #: src/language/command.def:128 #, fuzzy #| msgid "Filtered" msgid "Filter" msgstr "已过滤" #: src/language/command.def:129 msgid "Flip" msgstr "" #: src/language/command.def:130 src/language/commands/chisquare.c:235 #: src/language/commands/cochran.c:150 src/language/commands/median.c:305 #: src/language/commands/sign.c:66 src/ui/gui/frequencies.ui:675 msgid "Frequencies" msgstr "频率" #: src/language/command.def:131 msgid "GLM" msgstr "" #: src/language/command.def:132 #, fuzzy #| msgid "_Graphs" msgid "Graph" msgstr "图形(_G)" #: src/language/command.def:133 msgid "List" msgstr "" #: src/language/command.def:134 src/ui/gui/logistic.ui:219 msgid "Logistic Regression" msgstr "逻辑斯蒂回归" #: src/language/command.def:135 src/ui/gui/means.ui:25 msgid "Means" msgstr "均值" #: src/language/command.def:136 #, fuzzy #| msgid "_Non-Parametric Statistics" msgid "Nonparametric Tests" msgstr "非参数统计(_N)" #: src/language/command.def:137 msgid "Oneway" msgstr "" #: src/language/command.def:138 #, fuzzy #| msgid "Pearson Correlation" msgid "Pearson Correlations" msgstr "皮尔森相关" #: src/language/command.def:139 #, fuzzy #| msgid "Cluster" msgid "Quick Cluster" msgstr "类群" #: src/language/command.def:140 #, fuzzy #| msgid "Ranks" msgid "Rank" msgstr "次序" #: src/language/command.def:141 src/language/commands/regression.c:933 #: src/ui/gui/regression.ui:20 msgid "Regression" msgstr "回归" #: src/language/command.def:142 #, fuzzy #| msgid "Re_liability..." msgid "Reliability" msgstr "信度分析(_l)..." #: src/language/command.def:143 #, fuzzy #| msgid "Name Variable:" msgid "Rename Variables" msgstr "名称变量：" #: src/language/command.def:144 msgid "ROC" msgstr "" #: src/language/command.def:145 src/ui/gui/var-type-dialog.ui:293 msgid "Sample" msgstr "样本" #: src/language/command.def:146 #: src/ui/gui/psppire-dialog-action-aggregate.c:211 #: src/ui/gui/psppire-data-window.c:494 src/ui/gui/psppire-data-window.c:498 #: src/ui/gui/psppire-output-window.c:315 #: src/ui/gui/psppire-syntax-window.c:670 src/ui/gui/psppire-window.c:443 #: src/ui/gui/aggregate.ui:552 msgid "Save" msgstr "保存" #: src/language/command.def:147 #, fuzzy #| msgid "_Selection" msgid "Save Data Collection" msgstr "选中(_S)" #: src/language/command.def:148 msgid "Save Translate" msgstr "" #: src/language/command.def:149 src/ui/gui/sort.ui:25 msgid "Sort Cases" msgstr "排序" #: src/language/command.def:150 #, fuzzy #| msgid "Variables" msgid "Sort Variables" msgstr "变量" #: src/language/command.def:151 msgid "T-Test" msgstr "" #: src/language/command.def:152 msgid "Temporary" msgstr "" #: src/language/command.def:153 msgid "Use" msgstr "" #: src/language/command.def:156 #, fuzzy #| msgid "Find Case" msgid "End Case" msgstr "查找个案" #: src/language/command.def:157 #, fuzzy #| msgid "File:" msgid "End File" msgstr "文件：" #: src/language/command.def:158 #, fuzzy #| msgid "Spread" msgid "Reread" msgstr "展布" #: src/language/command.def:161 msgid "Else If" msgstr "" #: src/language/command.def:162 msgid "Else" msgstr "" #: src/language/command.def:163 msgid "End If" msgstr "" #: src/language/command.def:164 msgid "End Loop" msgstr "" #: src/language/lexer/lexer.c:566 #, fuzzy, c-format #| msgid "Syntax error at `%s'" msgid "Syntax error expecting %s." msgstr "`%s'处出现语法错误" #: src/language/lexer/lexer.c:570 #, fuzzy, c-format #| msgid "expecting %s or %s" msgid "Syntax error expecting %s or %s." msgstr "要求%s或%s" #: src/language/lexer/lexer.c:575 #, fuzzy, c-format #| msgid "expecting %s, %s, or %s" msgid "Syntax error expecting %s, %s, or %s." msgstr "要求%s、%s或%s" #: src/language/lexer/lexer.c:580 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, or %s" msgid "Syntax error expecting %s, %s, %s, or %s." msgstr "要求%s、%s、%s或%s" #: src/language/lexer/lexer.c:585 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, or %s" msgid "Syntax error expecting %s, %s, %s, %s, or %s." msgstr "要求%s、%s、%s、%s或%s" #: src/language/lexer/lexer.c:590 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, or %s" msgid "Syntax error expecting %s, %s, %s, %s, %s, or %s." msgstr "要求%s、%s、%s、%s、%s或%s" #: src/language/lexer/lexer.c:596 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, %s, or %s" msgid "Syntax error expecting %s, %s, %s, %s, %s, %s, or %s." msgstr "要求%s、%s、%s、%s、%s、%s或%s" #: src/language/lexer/lexer.c:603 #, fuzzy, c-format #| msgid "expecting %s, %s, %s, %s, %s, %s, %s, or %s" msgid "Syntax error expecting %s, %s, %s, %s, %s, %s, %s, or %s." msgstr "要求%s、%s、%s、%s、%s、%s、%s或%s" #: src/language/lexer/lexer.c:618 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting one of the following: %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:639 src/language/lexer/lexer.c:641 #, c-format msgid "Subcommand %s may only be specified once." msgstr "子命令%s可能被多次指定。" #: src/language/lexer/lexer.c:654 #, c-format msgid "Required subcommand %s was not specified." msgstr "必须使用的子命令%s没有指定。" #: src/language/lexer/lexer.c:662 #, fuzzy, c-format #| msgid "%s may only be specified once within subcommand %s" msgid "%s may only be specified once within subcommand %s." msgstr "%s仅可在子命令%s下设定一次" #: src/language/lexer/lexer.c:671 #, fuzzy, c-format #| msgid "Required %s specification missing from %s subcommand" msgid "Required %s specification missing from %s subcommand." msgstr "缺少%s，为子命令%s要求必需设定" #: src/language/lexer/lexer.c:694 src/language/commands/autorecode.c:211 #: src/language/commands/print-space.c:88 src/language/commands/select-if.c:59 #, fuzzy #| msgid "Syntax error at end of command" msgid "Syntax error expecting end of command." msgstr "指令结尾处语法错误" #: src/language/lexer/lexer.c:896 #, fuzzy #| msgid "expecting string" msgid "Syntax error expecting string." msgstr "要求字符串" #: src/language/lexer/lexer.c:925 src/language/lexer/lexer.c:957 #: src/language/lexer/lexer.c:1043 #, fuzzy #| msgid "expecting integer" msgid "Syntax error expecting integer." msgstr "要求整数" #: src/language/lexer/lexer.c:955 src/language/lexer/lexer.c:1040 #, fuzzy, c-format #| msgid "Syntax error in date field." msgid "Syntax error expecting integer for %s." msgstr "日期字段语法错误。" #: src/language/lexer/lexer.c:962 #, fuzzy, c-format #| msgid "Syntax error in date field." msgid "Syntax error expecting %ld for %s." msgstr "日期字段语法错误。" #: src/language/lexer/lexer.c:964 #, fuzzy, c-format #| msgid "Syntax error in date field." msgid "Syntax error expecting %ld." msgstr "日期字段语法错误。" #: src/language/lexer/lexer.c:969 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting %ld or %ld for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:972 #, fuzzy, c-format #| msgid "Syntax error in date field." msgid "Syntax error expecting %ld or %ld." msgstr "日期字段语法错误。" #: src/language/lexer/lexer.c:984 #, c-format msgid "Syntax error expecting integer between %ld and %ld for %s." msgstr "" #: src/language/lexer/lexer.c:988 #, c-format msgid "Syntax error expecting integer between %ld and %ld." msgstr "" #: src/language/lexer/lexer.c:997 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting non-negative integer for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1001 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting non-negative integer." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1007 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting positive integer for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1011 #, fuzzy #| msgid "Syntax error in date field." msgid "Syntax error expecting positive integer." msgstr "日期字段语法错误。" #: src/language/lexer/lexer.c:1017 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting integer %ld or greater for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1021 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting integer %ld or greater." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1029 #, c-format msgid "Syntax error expecting integer less than or equal to %ld for %s." msgstr "" #: src/language/lexer/lexer.c:1033 #, c-format msgid "Syntax error expecting integer less than or equal to %ld." msgstr "" #: src/language/lexer/lexer.c:1057 src/language/lexer/lexer.c:1081 #: src/language/lexer/lexer.c:1148 src/language/lexer/lexer.c:1174 #: src/language/lexer/lexer.c:1229 src/language/lexer/lexer.c:1255 #: src/language/lexer/lexer.c:1309 src/language/lexer/lexer.c:1335 #: src/language/lexer/lexer.c:1390 #, fuzzy #| msgid "expecting number" msgid "Syntax error expecting number." msgstr "要求数字" #: src/language/lexer/lexer.c:1079 src/language/lexer/lexer.c:1146 #: src/language/lexer/lexer.c:1172 src/language/lexer/lexer.c:1227 #: src/language/lexer/lexer.c:1253 src/language/lexer/lexer.c:1307 #: src/language/lexer/lexer.c:1333 src/language/lexer/lexer.c:1387 #, fuzzy, c-format #| msgid "expecting number or string" msgid "Syntax error expecting number for %s." msgstr "要求数字或字符串" #: src/language/lexer/lexer.c:1086 #, fuzzy, c-format #| msgid "expecting number or string" msgid "Syntax error expecting number %g for %s." msgstr "要求数字或字符串" #: src/language/lexer/lexer.c:1089 #, fuzzy, c-format #| msgid "expecting number" msgid "Syntax error expecting number %g." msgstr "要求数字" #: src/language/lexer/lexer.c:1100 #, c-format msgid "Syntax error expecting number between %g and %g for %s." msgstr "" #: src/language/lexer/lexer.c:1104 #, c-format msgid "Syntax error expecting number between %g and %g." msgstr "" #: src/language/lexer/lexer.c:1113 src/language/lexer/lexer.c:1196 #, c-format msgid "Syntax error expecting non-negative number for %s." msgstr "" #: src/language/lexer/lexer.c:1117 src/language/lexer/lexer.c:1200 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting non-negative number." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1123 src/language/lexer/lexer.c:1206 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number %g or greater for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1127 src/language/lexer/lexer.c:1210 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number %g or greater." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1135 #, c-format msgid "Syntax error expecting number less than or equal to %g for %s." msgstr "" #: src/language/lexer/lexer.c:1139 #, c-format msgid "Syntax error expecting number less than or equal to %g." msgstr "" #: src/language/lexer/lexer.c:1184 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number in [%g,%g) for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1188 #, c-format msgid "Syntax error expecting number in [%g,%g)." msgstr "" #: src/language/lexer/lexer.c:1218 src/language/lexer/lexer.c:1377 #, c-format msgid "Syntax error expecting number less than %g for %s." msgstr "" #: src/language/lexer/lexer.c:1221 src/language/lexer/lexer.c:1381 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number less than %g." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1265 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number in (%g,%g] for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1269 #, c-format msgid "Syntax error expecting number in (%g,%g]." msgstr "" #: src/language/lexer/lexer.c:1277 src/language/lexer/lexer.c:1357 #, c-format msgid "Syntax error expecting positive number for %s." msgstr "" #: src/language/lexer/lexer.c:1281 src/language/lexer/lexer.c:1360 #, fuzzy #| msgid "Syntax error in date field." msgid "Syntax error expecting positive number." msgstr "日期字段语法错误。" #: src/language/lexer/lexer.c:1286 src/language/lexer/lexer.c:1366 #, c-format msgid "Syntax error expecting number greater than %g for %s." msgstr "" #: src/language/lexer/lexer.c:1290 src/language/lexer/lexer.c:1370 #, fuzzy, c-format #| msgid "expecting number or data string" msgid "Syntax error expecting number greater than %g." msgstr "要求数字或数据字符串" #: src/language/lexer/lexer.c:1298 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number %g or less for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1301 #, fuzzy, c-format #| msgid "expecting number or string" msgid "Syntax error expecting number %g or less." msgstr "要求数字或字符串" #: src/language/lexer/lexer.c:1345 #, fuzzy, c-format #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting number in (%g,%g) for %s." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/lexer/lexer.c:1349 #, c-format msgid "Syntax error expecting number in (%g,%g)." msgstr "" #: src/language/lexer/lexer.c:1404 src/language/commands/define.c:176 #: src/language/commands/define.c:182 #, fuzzy #| msgid "expecting identifier" msgid "Syntax error expecting identifier." msgstr "要求识别符" #: src/language/lexer/lexer.c:1805 #, fuzzy, c-format #| msgid "Syntax error at `%s'" msgid "Syntax error expecting `%s'." msgstr "`%s'处出现语法错误" #: src/language/lexer/lexer.c:2161 #, c-format msgid "In syntax expanded from `%s'" msgstr "" #: src/language/lexer/lexer.c:2164 #, fuzzy #| msgid "Syntax error at end of input" msgid "At end of input" msgstr "输入结尾处语法错误" #: src/language/lexer/lexer.c:2171 #, fuzzy #| msgid "Syntax error" msgid "Syntax error." msgstr "语法错误" #: src/language/lexer/lexer.c:2400 msgid "Macro Expansion" msgstr "" #: src/language/lexer/lexer.c:2660 #, c-format msgid "Opening `%s': %s." msgstr "正在打开 `%s': %s。" #: src/language/lexer/lexer.c:2704 #, c-format msgid "Error closing `%s': %s." msgstr "关闭时出错`%s': %s。" #: src/language/lexer/macro.c:93 #, c-format msgid "At `%s' in the expansion of `%s'," msgstr "" #: src/language/lexer/macro.c:97 #, c-format msgid "In the expansion of `%s'," msgstr "" #: src/language/lexer/macro.c:100 #, c-format msgid "inside the expansion of `%s'," msgstr "" #: src/language/lexer/macro.c:611 #, c-format msgid "Reached end of command expecting %zu more token in argument %s to macro %s." msgstr "" #: src/language/lexer/macro.c:613 #, c-format msgid "Reached end of command expecting %zu more tokens in argument %s to macro %s." msgstr "" #: src/language/lexer/macro.c:623 #, c-format msgid "Reached end of command expecting \"%s\" in argument %s to macro %s." msgstr "" #: src/language/lexer/macro.c:679 msgid "" msgstr "" #: src/language/lexer/macro.c:682 #, c-format msgid "Found `%.*s' while expecting `%s' reading argument %s to macro %s." msgstr "" #: src/language/lexer/macro.c:747 #, c-format msgid "Argument %s multiply specified in call to macro %s." msgstr "" #: src/language/lexer/macro.c:1000 #, c-format msgid "`,' or `)' expected in call to macro function %s." msgstr "" #: src/language/lexer/macro.c:1006 #, c-format msgid "Missing `)' in call to macro function %s." msgstr "" #: src/language/lexer/macro.c:1139 #, c-format msgid "Macro function %s takes one argument (not %zu)." msgstr "" #: src/language/lexer/macro.c:1143 #, c-format msgid "Macro function %s takes two arguments (not %zu)." msgstr "" #: src/language/lexer/macro.c:1147 #, c-format msgid "Macro function %s takes two or three arguments (not %zu)." msgstr "" #: src/language/lexer/macro.c:1152 #, fuzzy, c-format #| msgid "Vectors must have at least one element." msgid "Macro function %s needs at least one argument." msgstr "向量必须至少包括一个元素。" #: src/language/lexer/macro.c:1172 #, c-format msgid "Argument to !BLANKS must be non-negative integer (not \"%s\")." msgstr "" #: src/language/lexer/macro.c:1235 #, c-format msgid "Second argument of !SUBSTR must be positive integer (not \"%s\")." msgstr "" #: src/language/lexer/macro.c:1246 #, c-format msgid "Third argument of !SUBSTR must be non-negative integer (not \"%s\")." msgstr "" #: src/language/lexer/macro.c:1345 msgid "Expecting ')' in macro expression." msgstr "" #: src/language/lexer/macro.c:1354 msgid "Expecting literal or function invocation in macro expression." msgstr "" #: src/language/lexer/macro.c:1570 #, fuzzy, c-format #| msgid "The expression on %s evaluated to %g." msgid "Macro expression must evaluate to a number (not \"%s\")." msgstr "表达式%s在求值后作为%g。" #: src/language/lexer/macro.c:1630 msgid "!THEN expected in macro !IF construct." msgstr "" #: src/language/lexer/macro.c:1639 msgid "!ELSE or !IFEND expected in macro !IF construct." msgstr "" #: src/language/lexer/macro.c:1652 msgid "!IFEND expected in macro !IF construct." msgstr "" #: src/language/lexer/macro.c:1707 #, fuzzy #| msgid "Expected variable record." msgid "Expected macro variable name following !LET." msgstr "要求变量记录。" #: src/language/lexer/macro.c:1715 #, c-format msgid "Cannot use argument name or macro keyword \"%.*s\" as !LET variable." msgstr "" #: src/language/lexer/macro.c:1725 msgid "Expected `=' following !LET." msgstr "" #: src/language/lexer/macro.c:1757 #, fuzzy #| msgid "Missing N" msgid "Missing !DOEND." msgstr "缺失N" #: src/language/lexer/macro.c:1776 #, fuzzy #| msgid "Expected variable record." msgid "Expected macro variable name following !DO." msgstr "要求变量记录。" #: src/language/lexer/macro.c:1783 msgid "Cannot use argument name or macro keyword as !DO variable." msgstr "" #: src/language/lexer/macro.c:1824 #, c-format msgid "!DO loop over list exceeded maximum number of iterations %d. (Use SET MITERATE to change the limit.)" msgstr "" #: src/language/lexer/macro.c:1849 msgid "Expected !TO in numerical !DO loop." msgstr "" #: src/language/lexer/macro.c:1868 msgid "!BY value cannot be zero." msgstr "" #: src/language/lexer/macro.c:1886 #, c-format msgid "Numerical !DO loop exceeded maximum number of iterations %d. (Use SET MITERATE to change the limit.)" msgstr "" #: src/language/lexer/macro.c:1907 msgid "Expected `=' or !IN in !DO loop." msgstr "" #: src/language/lexer/macro.c:2070 msgid "!BREAK outside !DO." msgstr "" #: src/language/lexer/macro.c:2088 #, c-format msgid "Maximum nesting level %d exceeded. (Use SET MNEST to change the limit.)" msgstr "" #: src/language/lexer/format-parser.c:87 #, fuzzy #| msgid "expecting valid format specifier" msgid "Syntax error expecting valid format specifier." msgstr "要求有效的格式设定" #: src/language/lexer/format-parser.c:118 #: src/language/lexer/format-parser.c:145 src/language/commands/data-list.c:498 #: src/language/commands/get-data.c:556 src/language/commands/output.c:93 #: src/language/commands/placement-parser.c:247 #, c-format msgid "Unknown format type `%s'." msgstr "未知的格式类型`%s'。" #: src/language/lexer/format-parser.c:124 #, c-format msgid "Format specifier `%s' lacks required width." msgstr "格式设定`%s'必需设定宽度。" #: src/language/lexer/format-parser.c:140 #, fuzzy #| msgid "expecting format type" msgid "Syntax error expecting format type." msgstr "要求格式类型" #: src/language/lexer/scan.c:95 #, fuzzy, c-format #| msgid "String of hex digits has %d characters, which is not a multiple of 2" msgid "String of hex digits has %zu characters, which is not a multiple of 2." msgstr "16进制字符长度%d不是2的倍数" #: src/language/lexer/scan.c:107 src/language/lexer/scan.c:129 #, fuzzy, c-format #| msgid "`%c' is not a valid hex digit" msgid "`%c' is not a valid hex digit." msgstr "`%c'不是有效的16进制数字" #: src/language/lexer/scan.c:120 #, fuzzy, c-format #| msgid "Unicode string contains %d bytes, which is not in the valid range of 1 to 8 bytes" msgid "Unicode string contains %zu bytes, which is not in the valid range of 1 to 8 bytes." msgstr "%d字节的Unicode字符串超出1到8字节的有效范围" #: src/language/lexer/scan.c:134 #, fuzzy, c-format #| msgid "U+%04X is not a valid Unicode code point" msgid "U+%04llX is not a valid Unicode code point." msgstr "U+%04X不是正确的Unicode输入码" #: src/language/lexer/scan.c:309 #, fuzzy, c-format #| msgid "Bad character %s in input" msgid "Bad character %s in input." msgstr "输入含有无效字符%s" #: src/language/lexer/scan.c:386 #, fuzzy #| msgid "Unterminated string constant" msgid "Unterminated string constant." msgstr "字符串常量尚未结束" #: src/language/lexer/scan.c:391 #, fuzzy, c-format #| msgid "Missing exponent following `%s'" msgid "Missing exponent following `%.*s'." msgstr "`%s'后缺少组件" #: src/language/lexer/value-parser.c:78 #, c-format msgid "Ends of range are equal (%.*g)." msgstr "区界上下界相同(%.*g)。" #: src/language/lexer/value-parser.c:87 #, c-format msgid "%s or %s must be part of a range." msgstr "%s或%s必需处在区间内。" #: src/language/lexer/value-parser.c:120 msgid "System-missing value is not valid here." msgstr "系统缺失值于此处无效。" #: src/language/lexer/value-parser.c:154 msgid "This string is not representable in the dataset encoding." msgstr "" #: src/language/lexer/value-parser.c:160 #, fuzzy, c-format #| msgid "In file %s, %s is a string variable with width %d." msgid "This %zu-byte string is too long for variable %s with width %d." msgstr "文件%s中，%s是长度%d的字符串类型。" #: src/language/lexer/variable-parser.c:86 #: src/language/lexer/variable-parser.c:783 #: src/language/lexer/variable-parser.c:803 src/language/commands/graph.c:810 #: src/language/commands/matrix.c:6077 utilities/pspp-convert.c:84 #, fuzzy #| msgid "expecting variable name" msgid "Syntax error expecting variable name." msgstr "要求变量名" #: src/language/lexer/variable-parser.c:96 #: src/language/lexer/variable-parser.c:849 #: src/language/lexer/variable-parser.c:860 #, c-format msgid "%s is not a variable name." msgstr "%s不是有效的变量名。" #: src/language/lexer/variable-parser.c:208 #, c-format msgid "%s is not a numeric variable. It will not be included in the variable list." msgstr "%s不是数字变量，将不包括在变量列表中。" #: src/language/lexer/variable-parser.c:212 #, c-format msgid "%s is not a string variable. It will not be included in the variable list." msgstr "%s不是字符串变量，将不包括在变量列表中。" #: src/language/lexer/variable-parser.c:217 #, c-format msgid "Scratch variables (such as %s) are not allowed here." msgstr "不允许使用临时变量(如%s)。" #: src/language/lexer/variable-parser.c:222 #, c-format msgid "%s and %s are not the same type. All variables in this variable list must be of the same type. %s will be omitted from the list." msgstr "%s和%s类型不同。变量列表中的变量须为同一类型。%s将被忽略。" #: src/language/lexer/variable-parser.c:229 #, c-format msgid "%s and %s are string variables with different widths. All variables in this variable list must have the same width. %s will be omitted from the list." msgstr "%s和%s字符串变量宽度不同。变量列表中的变量具有相同宽度。%s将被忽略。" #: src/language/lexer/variable-parser.c:235 #: src/language/lexer/variable-parser.c:500 #, c-format msgid "Variable %s appears twice in variable list." msgstr "%s在列表中重复出现。" #: src/language/lexer/variable-parser.c:357 #: src/language/lexer/variable-parser.c:869 #, fuzzy, c-format #| msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary." msgid "%s TO %s is not valid syntax since %s is after %s in the dictionary." msgstr "%s到%s不符合语法，字典中%s先于%s出现。" #: src/language/lexer/variable-parser.c:366 msgid "With the syntax TO , variables and must be both regular variables or both scratch variables." msgstr "" #: src/language/lexer/variable-parser.c:384 #, fuzzy, c-format #| msgid "%s is a duplicate variable name." msgid "%s is a regular variable." msgstr "变量名称%s重复。" #: src/language/lexer/variable-parser.c:390 #, fuzzy, c-format #| msgid "%s is a duplicate variable name." msgid "%s is a scratch variable." msgstr "变量名称%s重复。" #: src/language/lexer/variable-parser.c:396 #, fuzzy, c-format #| msgid "%s is a duplicate variable name." msgid "%s is a system variable." msgstr "变量名称%s重复。" #: src/language/lexer/variable-parser.c:475 #, c-format msgid "`%s' cannot be used with TO because it does not end in a digit." msgstr "`%s'没有以数字结尾，不能在TO中使用。" #: src/language/lexer/variable-parser.c:484 #, c-format msgid "Numeric suffix on `%s' is larger than supported with TO." msgstr "`%s'的数字结尾大于TO支持的值。" #: src/language/lexer/variable-parser.c:585 msgid "Prefixes don't match in use of TO convention." msgstr "前缀不符合TO命名规范。" #: src/language/lexer/variable-parser.c:591 msgid "Bad bounds in use of TO convention." msgstr "边界不符合TO规范。" #: src/language/lexer/variable-parser.c:882 #, fuzzy, c-format #| msgid "%s is not a variable name." msgid "%s is not a numeric variable." msgstr "%s不是有效的变量名。" #: src/language/commands/aggregate.c:246 #, fuzzy #| msgid "When PRESORTED is specified, specifying sorting directions with (A) or (D) has no effect. Output data will be sorted the same way as the input data." msgid "When the input data is presorted, specifying sorting directions with (A) or (D) has no effect. Output data will be sorted the same way as the input data." msgstr "设定PRESORTED(预排序)时，使用(A)和(D)设定排序方向不进行排序。 输出数据将按输入数据的排序方式排序" #: src/language/commands/aggregate.c:252 msgid "The PRESORTED subcommand states that the input data is presorted." msgstr "" #: src/language/commands/aggregate.c:256 msgid "ADDVARIABLES implies that the input data is presorted." msgstr "" #: src/language/commands/aggregate.c:259 msgid "The input data must be presorted because the OUTFILE subcommand is not specified." msgstr "" #: src/language/commands/aggregate.c:387 #, fuzzy #| msgid "expecting aggregation function" msgid "Syntax error expecting aggregation function." msgstr "要求汇总函数" #: src/language/commands/aggregate.c:401 #, c-format msgid "Unknown aggregation function %s." msgstr "未知的汇总函数%s。" #: src/language/commands/aggregate.c:498 #, c-format msgid "Missing argument %zu to %s." msgstr "没有参数%zu被传递到%s。" #: src/language/commands/aggregate.c:505 #, c-format msgid "Arguments to %s must be of same type as source variables." msgstr "传递到%s的参数必须与源变量类型相同。" #: src/language/commands/aggregate.c:511 #, fuzzy #| msgid "The filter variable must be numeric." msgid "The argument is numeric." msgstr "过滤变量必须为数字型。" #: src/language/commands/aggregate.c:513 #, fuzzy #| msgid "Output variables are _strings" msgid "The variables have string type." msgstr "输出变量为字符串(_s)" #: src/language/commands/aggregate.c:518 msgid "The argument is a string." msgstr "" #: src/language/commands/aggregate.c:520 #, fuzzy #| msgid "The filter variable must be numeric." msgid "The variables are numeric." msgstr "过滤变量必须为数字型。" #: src/language/commands/aggregate.c:549 #, c-format msgid "Number of source variables (%zu) does not match number of target variables (%zu)." msgstr "源变量数量(%zu)与目标变量数量(%zu)不符。" #: src/language/commands/aggregate.c:553 #, fuzzy #| msgid "Arguments to %s must be of same type as source variables." msgid "These are the source variables." msgstr "传递到%s的参数必须与源变量类型相同。" #: src/language/commands/aggregate.c:555 #, fuzzy #| msgid "Transpose the cases with the variables" msgid "These are the target variables." msgstr "对变量进行排序" #: src/language/commands/aggregate.c:571 #, fuzzy, c-format #| msgid "The value arguments passed to the %s function are out-of-order. They will be treated as if they had been specified in the correct order." msgid "The value arguments passed to the %s function are out of order. They will be treated as if they had been specified in the correct order." msgstr "传递到%s函数的值参数顺序混乱。将被视作已正确排序处理。" #: src/language/commands/aggregate.c:587 #, fuzzy, c-format #| msgid "Duplicate variable name %s." msgid "Duplicate target variable name %s." msgstr "变量名称%s重复。" #: src/language/commands/aggregate.c:591 #, c-format msgid "Variable name %s duplicates the name of a variable in the active file dictionary." msgstr "" #: src/language/commands/aggregate.c:596 #, fuzzy, c-format #| msgid "Target variable %s duplicates existing variable %s." msgid "Variable name %s duplicates the name of a break variable." msgstr "目标变量%s与现存变量%s冲突。" #: src/language/commands/aggregate.h:34 msgid "Sum of values" msgstr "总和" #: src/language/commands/aggregate.h:35 msgid "Mean average" msgstr "均值平均" #: src/language/commands/aggregate.h:36 src/language/commands/ctables.c:373 #: src/language/commands/examine.c:736 src/language/commands/frequencies.c:99 #: src/language/commands/means-calc.c:442 src/language/commands/median.c:352 #: src/ui/gui/psppire-dialog-action-frequencies.c:52 msgid "Median" msgstr "中位数" #: src/language/commands/aggregate.h:37 #: src/ui/gui/psppire-dialog-action-descriptives.c:40 #: src/ui/gui/psppire-dialog-action-frequencies.c:41 msgid "Standard deviation" msgstr "标准差" #: src/language/commands/aggregate.h:38 #: src/ui/gui/psppire-dialog-action-descriptives.c:42 msgid "Maximum value" msgstr "最大值" #: src/language/commands/aggregate.h:39 #: src/ui/gui/psppire-dialog-action-descriptives.c:41 msgid "Minimum value" msgstr "最小值" #: src/language/commands/aggregate.h:40 msgid "Percentage greater than" msgstr "高于下列值的百分比" #: src/language/commands/aggregate.h:41 msgid "Percentage less than" msgstr "低于下列值的百分比" #: src/language/commands/aggregate.h:42 msgid "Percentage included in range" msgstr "处于下列区间之内的百分比" #: src/language/commands/aggregate.h:43 msgid "Percentage excluded from range" msgstr "处于下列区间之外的百分比" #: src/language/commands/aggregate.h:44 msgid "Fraction greater than" msgstr "高于下列值的比例" #: src/language/commands/aggregate.h:45 msgid "Fraction less than" msgstr "低于下列值的比例" #: src/language/commands/aggregate.h:46 msgid "Fraction included in range" msgstr "处于下列区间之内的比例" #: src/language/commands/aggregate.h:47 msgid "Fraction excluded from range" msgstr "处于下列区间之外的比例" #: src/language/commands/aggregate.h:48 #, fuzzy #| msgid "Fraction greater than" msgid "Count greater than" msgstr "高于下列值的比例" #: src/language/commands/aggregate.h:49 #, fuzzy #| msgid "Fraction less than" msgid "Count less than" msgstr "低于下列值的比例" #: src/language/commands/aggregate.h:50 #, fuzzy #| msgid "Fraction included in range" msgid "Count included in range" msgstr "处于下列区间之内的比例" #: src/language/commands/aggregate.h:51 #, fuzzy #| msgid "Fraction excluded from range" msgid "Count excluded from range" msgstr "处于下列区间之外的比例" #: src/language/commands/aggregate.h:52 msgid "Number of cases" msgstr "个案数量" #: src/language/commands/aggregate.h:53 msgid "Number of cases (unweighted)" msgstr "个案数量（未加权）" #: src/language/commands/aggregate.h:54 msgid "Number of missing values" msgstr "缺失值数量" #: src/language/commands/aggregate.h:55 msgid "Number of missing values (unweighted)" msgstr "缺失值数量（未加权）" #: src/language/commands/aggregate.h:56 msgid "First non-missing value" msgstr "第一个非缺失值" #: src/language/commands/aggregate.h:57 msgid "Last non-missing value" msgstr "最后一个非缺失值" #: src/language/commands/apply-dictionary.c:71 #, c-format msgid "Variable %s is %s in target file, but %s in source file." msgstr "变量%s在目标文件中是%s，但在源文件中是%s。" #: src/language/commands/apply-dictionary.c:107 msgid "No matching variables found between the source and target files." msgstr "在源文件和目标文件中找不到要匹配的变量。" #: src/language/commands/autorecode.c:157 #, c-format msgid "Source variable count (%zu) does not match target variable count (%zu)." msgstr "源变量数量(%zu)与目标变量数量(%zu)不一致。" #: src/language/commands/autorecode.c:169 #, c-format msgid "Target variable %s duplicates existing variable %s." msgstr "目标变量%s与现存变量%s冲突。" #: src/language/commands/autorecode.c:226 #, c-format msgid "With GROUP, variables may not mix string variables (such as %s) and numeric variables (such as %s)." msgstr "" #: src/language/commands/autorecode.c:243 #, fuzzy #| msgid "REGRESSION with SAVE ignores TEMPORARY. Temporary transformations will be made permanent." msgid "AUTORECODE ignores TEMPORARY. Temporary transformations will be made permanent." msgstr "带SAVE选项的REGRESSION忽略TEMPORARY选项。临时变换将被保存。" #: src/language/commands/autorecode.c:380 #, fuzzy #| msgid "Recode into Same Variables" msgid "Recoding grouped variables." msgstr "重编码为到变量自身" #: src/language/commands/autorecode.c:382 #, fuzzy, c-format #| msgid "Replacing %s by %s: %s." msgid "Recoding %s into %s (%s)." msgstr "将%s替换为%s: %s。" #: src/language/commands/autorecode.c:386 #, fuzzy, c-format #| msgid "Removing %s: %s." msgid "Recoding %s into %s." msgstr "移除%s: %s。" #: src/language/commands/autorecode.c:392 #: src/language/commands/data-parser.c:726 #: src/language/commands/data-parser.c:772 src/language/commands/mrsets.c:571 #: src/language/commands/print.c:450 src/language/commands/sys-file-info.c:430 #: src/language/commands/sys-file-info.c:471 #: src/language/commands/sys-file-info.c:549 #: src/language/commands/sys-file-info.c:836 #, fuzzy #| msgid "Attribute" msgid "Attributes" msgstr "特征" #: src/language/commands/autorecode.c:393 src/ui/gui/recode.ui:207 msgid "New Value" msgstr "新值" #: src/language/commands/autorecode.c:393 msgid "Value Label" msgstr "值标签" #: src/language/commands/autorecode.c:396 msgid "Old Value" msgstr "旧值" #: src/language/commands/binomial.c:138 #, c-format msgid "Variable %s is not dichotomous" msgstr "变量%s不是二分变量" #: src/language/commands/binomial.c:182 src/ui/gui/binomial.ui:30 msgid "Binomial Test" msgstr "二项分布检验" #: src/language/commands/binomial.c:186 src/language/commands/chisquare.c:183 #: src/language/commands/chisquare.c:239 src/language/commands/chisquare.c:322 #: src/language/commands/cochran.c:188 src/language/commands/correlations.c:88 #: src/language/commands/correlations.c:139 #: src/language/commands/crosstabs.c:1068 #: src/language/commands/crosstabs.c:1392 #: src/language/commands/crosstabs.c:1426 #: src/language/commands/crosstabs.c:1435 #: src/language/commands/crosstabs.c:1463 #: src/language/commands/crosstabs.c:1504 #: src/language/commands/crosstabs.c:1548 src/language/commands/ctables.c:4598 #: src/language/commands/descriptives.c:954 src/language/commands/examine.c:590 #: src/language/commands/examine.c:728 src/language/commands/examine.c:821 #: src/language/commands/examine.c:909 src/language/commands/factor.c:1615 #: src/language/commands/factor.c:1738 src/language/commands/factor.c:1768 #: src/language/commands/factor.c:1932 src/language/commands/factor.c:1966 #: src/language/commands/frequencies.c:278 #: src/language/commands/frequencies.c:1315 #: src/language/commands/frequencies.c:1326 #: src/language/commands/friedman.c:250 src/language/commands/glm.c:652 #: src/language/commands/jonckheere-terpstra.c:360 #: src/language/commands/kruskal-wallis.c:265 #: src/language/commands/kruskal-wallis.c:313 #: src/language/commands/ks-one-sample.c:278 #: src/language/commands/logistic.c:1081 src/language/commands/logistic.c:1211 #: src/language/commands/logistic.c:1241 #: src/language/commands/mann-whitney.c:184 #: src/language/commands/mann-whitney.c:247 src/language/commands/mcnemar.c:222 #: src/language/commands/means.c:757 src/language/commands/means.c:810 #: src/language/commands/median.c:315 src/language/commands/median.c:350 #: src/language/commands/npar-summary.c:106 src/language/commands/oneway.c:902 #: src/language/commands/oneway.c:980 src/language/commands/oneway.c:1079 #: src/language/commands/oneway.c:1167 src/language/commands/oneway.c:1299 #: src/language/commands/quick-cluster.c:696 #: src/language/commands/regression.c:769 #: src/language/commands/regression.c:801 #: src/language/commands/regression.c:925 #: src/language/commands/regression.c:991 #: src/language/commands/reliability.c:490 #: src/language/commands/reliability.c:531 #: src/language/commands/reliability.c:580 #: src/language/commands/reliability.c:591 src/language/commands/roc.c:865 #: src/language/commands/roc.c:961 src/language/commands/runs.c:318 #: src/language/commands/sign.c:102 src/language/commands/t-test-indep.c:193 #: src/language/commands/t-test-indep.c:259 #: src/language/commands/t-test-one-sample.c:68 #: src/language/commands/t-test-one-sample.c:125 #: src/language/commands/t-test-paired.c:150 #: src/language/commands/t-test-paired.c:193 #: src/language/commands/t-test-paired.c:238 #: src/language/commands/wilcoxon.c:232 src/language/commands/wilcoxon.c:271 #: src/ui/gui/crosstabs.ui:499 src/ui/gui/examine.ui:283 #: src/ui/gui/oneway.ui:470 msgid "Statistics" msgstr "统计量" #: src/language/commands/binomial.c:187 src/language/commands/chisquare.c:240 #: src/language/commands/chisquare.c:252 msgid "Category" msgstr "类别" #: src/language/commands/binomial.c:189 msgid "Observed Prop." msgstr "实际概率。" #: src/language/commands/binomial.c:190 msgid "Test Prop." msgstr "检验概率。" #: src/language/commands/binomial.c:192 src/language/commands/crosstabs.c:1439 #: src/language/commands/mcnemar.c:224 src/language/commands/sign.c:103 #: src/language/commands/wilcoxon.c:277 msgid "Exact Sig. (2-tailed)" msgstr "确切显著度(双尾)" #: src/language/commands/binomial.c:193 src/language/commands/crosstabs.c:1440 #: src/language/commands/mcnemar.c:225 src/language/commands/sign.c:104 #: src/language/commands/wilcoxon.c:278 msgid "Exact Sig. (1-tailed)" msgstr "确切显著度(单尾)" #: src/language/commands/binomial.c:195 #, fuzzy #| msgid "Group1" msgid "Groups" msgstr "第1组" #: src/language/commands/binomial.c:196 #, fuzzy #| msgid "Group1" msgid "Group 1" msgstr "第1组" #: src/language/commands/binomial.c:196 #, fuzzy #| msgid "Group2" msgid "Group 2" msgstr "第2组" #: src/language/commands/binomial.c:196 src/language/commands/chisquare.c:223 #: src/language/commands/chisquare.c:257 src/language/commands/crosstabs.c:1074 #: src/language/commands/crosstabs.c:1357 src/language/commands/ctables.c:4281 #: src/language/commands/examine.c:914 src/language/commands/factor.c:1616 #: src/language/commands/frequencies.c:320 src/language/commands/glm.c:735 #: src/language/commands/kruskal-wallis.c:301 #: src/language/commands/logistic.c:1247 #: src/language/commands/mann-whitney.c:197 src/language/commands/means.c:707 #: src/language/commands/oneway.c:911 src/language/commands/oneway.c:1001 #: src/language/commands/regression.c:933 #: src/language/commands/reliability.c:496 src/language/commands/sign.c:75 #: src/language/commands/wilcoxon.c:239 #: src/ui/gui/psppire-dialog-action-crosstabs.c:93 msgid "Total" msgstr "总计" #: src/language/commands/binomial.c:199 #: src/language/commands/correlations.c:125 #: src/language/commands/correlations.c:153 #: src/language/commands/descriptives.c:567 src/language/commands/factor.c:1519 #: src/language/commands/factor.c:1562 src/language/commands/factor.c:1720 #: src/language/commands/factor.c:1938 src/language/commands/frequencies.c:1319 #: src/language/commands/kruskal-wallis.c:270 #: src/language/commands/kruskal-wallis.c:319 #: src/language/commands/ks-one-sample.c:316 src/language/commands/list.c:85 #: src/language/commands/logistic.c:1098 #: src/language/commands/mann-whitney.c:254 src/language/commands/means.c:719 #: src/language/commands/means.c:799 src/language/commands/median.c:358 #: src/language/commands/oneway.c:914 src/language/commands/oneway.c:1086 #: src/language/commands/regression.c:826 #: src/language/commands/reliability.c:538 #: src/language/commands/sys-file-info.c:219 #: src/language/commands/sys-file-info.c:546 #: src/language/commands/t-test-one-sample.c:132 #: src/language/commands/t-test-paired.c:157 src/ui/gui/variable-info.ui:21 msgid "Variables" msgstr "变量" #: src/language/commands/cd.c:45 src/language/commands/include.c:156 #, fuzzy, c-format #| msgid "Cannot change directory to %s: %s " msgid "Cannot change directory to %s: %s" msgstr "不能转到目录%s：%s " #: src/language/commands/chisquare.c:171 #, fuzzy, c-format #| msgid "CHISQUARE test specified %d expected values, but %d distinct values were encountered in variable %s." msgid "CHISQUARE test specified %d expected values, but variable %s has %zu distinct values." msgstr "卡方检验指定%d的期望值，但%d不同的值存在于变量%s中。" #: src/language/commands/chisquare.c:184 src/language/commands/chisquare.c:241 msgid "Observed N" msgstr "实测 N" #: src/language/commands/chisquare.c:185 src/language/commands/chisquare.c:242 msgid "Expected N" msgstr "期望 N" #: src/language/commands/chisquare.c:186 src/language/commands/chisquare.c:243 #: src/language/commands/crosstabs.c:78 src/language/commands/regression.c:933 #: src/ui/gui/psppire-dialog-action-crosstabs.c:95 msgid "Residual" msgstr "残差" #: src/language/commands/chisquare.c:195 src/language/commands/cochran.c:156 #: src/language/commands/cochran.c:185 src/language/commands/crosstabs.c:1436 #: src/language/commands/crosstabs.c:1457 #: src/language/commands/crosstabs.c:1496 #: src/language/commands/crosstabs.c:1542 src/language/commands/examine.c:826 #: src/language/commands/reliability.c:595 #: src/language/commands/reliability.c:598 #: src/language/commands/split-file.c:90 src/language/commands/split-file.c:91 #: src/language/commands/sys-file-info.c:799 msgid "Value" msgstr "值" #: src/language/commands/chisquare.c:246 src/language/commands/chisquare.c:328 #: src/language/commands/cochran.c:164 src/language/commands/correlations.c:94 #: src/language/commands/data-parser.c:730 #: src/language/commands/data-parser.c:775 #: src/language/commands/descriptives.c:967 #: src/language/commands/friedman.c:226 #: src/language/commands/jonckheere-terpstra.c:376 #: src/language/commands/matrix.c:6040 src/language/commands/matrix.c:8528 #: src/language/commands/npar-summary.c:113 src/language/commands/print.c:454 #: src/language/commands/quick-cluster.c:539 src/language/commands/runs.c:331 #: src/language/commands/set.c:1424 src/language/commands/split-file.c:93 #: src/language/commands/sys-file-info.c:472 #: src/language/commands/sys-file-info.c:837 src/ui/gui/psppire-dictview.c:674 #: src/ui/gui/psppire-data-editor.c:502 msgid "Variable" msgstr "变量" #: src/language/commands/chisquare.c:320 src/language/commands/cochran.c:181 #: src/language/commands/friedman.c:246 #: src/language/commands/kruskal-wallis.c:311 #: src/language/commands/mann-whitney.c:244 src/language/commands/mcnemar.c:219 #: src/language/commands/median.c:347 src/language/commands/sign.c:100 #: src/language/commands/wilcoxon.c:268 msgid "Test Statistics" msgstr "检验统计量" #: src/language/commands/chisquare.c:323 #, fuzzy #| msgid "Chi-Square" msgid "Chi-square" msgstr "卡方" #: src/language/commands/chisquare.c:324 src/language/commands/cochran.c:191 #: src/language/commands/crosstabs.c:1437 src/language/commands/examine.c:662 #: src/language/commands/factor.c:1971 src/language/commands/friedman.c:257 #: src/language/commands/glm.c:656 src/language/commands/kruskal-wallis.c:315 #: src/language/commands/logistic.c:1085 src/language/commands/median.c:354 #: src/language/commands/oneway.c:904 src/language/commands/oneway.c:1171 #: src/language/commands/regression.c:927 #: src/language/commands/t-test-indep.c:267 #: src/language/commands/t-test-one-sample.c:75 #: src/language/commands/t-test-paired.c:253 msgid "df" msgstr "df" #: src/language/commands/chisquare.c:325 src/language/commands/cochran.c:192 #: src/language/commands/friedman.c:258 #: src/language/commands/kruskal-wallis.c:316 #: src/language/commands/median.c:355 msgid "Asymp. Sig." msgstr "渐进显著" #: src/language/commands/cochran.c:111 msgid "More than two values encountered. Cochran Q test will not be run." msgstr "检测到多于两个值。取消Cochran Q检验。" #: src/language/commands/cochran.c:153 #, c-format msgid "Success (%.*g)" msgstr "成功(%.*g)" #: src/language/commands/cochran.c:154 #, c-format msgid "Failure (%.*g)" msgstr "失败(%.*g)" #: src/language/commands/cochran.c:190 msgid "Cochran's Q" msgstr "Cochran氏Q" #: src/language/commands/combine-files.c:230 msgid "Cannot specify the active dataset since none has been defined." msgstr "没有可用数据集来指定活动数据集。" #: src/language/commands/combine-files.c:237 msgid "This command may not be used after TEMPORARY when the active dataset is an input source. Temporary transformations will be made permanent." msgstr "活动数据集作为输入源时，该指令将不能用于TEMPORARY之后。临时变换将被保存。" #: src/language/commands/combine-files.c:278 msgid "Multiple IN subcommands for a single FILE or TABLE." msgstr "单个FILE或TABLE内指定了多个IN子指令。" #: src/language/commands/combine-files.c:382 #, c-format msgid "File %s lacks BY variable %s." msgstr "文件%s缺少BY变量%s。" #: src/language/commands/combine-files.c:484 #: src/language/commands/combine-files.c:490 #, c-format msgid "BY is required when %s is specified." msgstr "指定%s时必须指定BY子命令。" #: src/language/commands/combine-files.c:665 #, fuzzy, c-format #| msgid "Variable %s in file %s has different type or width from the same variable in earlier file." msgid "Variable %s has different types in different files." msgstr "变量%s所处的文件%s与之前文件中同一个变量类型或长度不同。" #: src/language/commands/combine-files.c:676 #, c-format msgid "In file %s, %s is numeric." msgstr "文件%s中，%s为数字类型。" #: src/language/commands/combine-files.c:680 #, fuzzy, c-format #| msgid "In file %s, %s is numeric." msgid "In file %s, %s is a string." msgstr "文件%s中，%s为数字类型。" #: src/language/commands/combine-files.c:699 #, fuzzy, c-format #| msgid "Combining files with incompatible encodings. String data may not be represented correctly." msgid "Combining files with different encodings. String data (such as in variable `%s') may not be represented correctly." msgstr "试图合并编码兼容的文件，字符串可能不能正常显示。" #: src/language/commands/combine-files.c:710 #, c-format msgid "File %s uses encoding %s. The output will use this encoding." msgstr "" #: src/language/commands/combine-files.c:715 #, fuzzy, c-format #| msgid "Usable encodings for %s." msgid "File %s uses encoding %s." msgstr "可用于%s的编码。" #: src/language/commands/combine-files.c:745 #, c-format msgid "Variable name %s specified on %s subcommand duplicates an existing variable name." msgstr "变量名称%s(子命令%s内)与现有变量冲突。" #: src/language/commands/combine-files.c:910 #, c-format msgid "Encountered %zu sets of duplicate cases in the master file." msgstr "%zu的个案与主文件重复。" #: src/language/commands/compute.c:167 src/language/commands/compute.c:224 #, c-format msgid "When executing COMPUTE: SYSMIS is not a valid value as an index into vector %s." msgstr "执行COMPUTE命令时：SYSMIS的值不能作为向量%s的有效索引值。" #: src/language/commands/compute.c:172 src/language/commands/compute.c:232 #, c-format msgid "When executing COMPUTE: %.*g is not a valid value as an index into vector %s." msgstr "执行COMPUTE命令时：%.*g的值不能作为向量%s的有效索引值。" #: src/language/commands/compute.c:380 #, c-format msgid "There is no vector named %s." msgstr "无法找到名称为%s的向量。" #: src/language/commands/correlations.c:85 #: src/language/commands/descriptives.c:950 src/language/commands/factor.c:1929 #: src/language/commands/npar-summary.c:102 msgid "Descriptive Statistics" msgstr "描述性统计" #: src/language/commands/correlations.c:89 src/language/commands/ctables.c:372 #: src/language/commands/descriptives.c:107 src/language/commands/examine.c:728 #: src/language/commands/factor.c:1933 src/language/commands/frequencies.c:97 #: src/language/commands/graph.c:210 src/language/commands/ks-one-sample.c:290 #: src/language/commands/means-calc.c:438 #: src/language/commands/npar-summary.c:108 src/language/commands/oneway.c:981 #: src/language/commands/t-test-indep.c:195 #: src/language/commands/t-test-one-sample.c:127 #: src/language/commands/t-test-paired.c:152 #: src/language/commands/t-test-paired.c:241 #: src/output/charts/plot-hist-cairo.c:43 #: src/ui/gui/psppire-dialog-action-descriptives.c:39 #: src/ui/gui/psppire-dialog-action-frequencies.c:40 #: src/ui/gui/psppire-dialog-action-ctables.c:215 msgid "Mean" msgstr "均值" #: src/language/commands/correlations.c:90 src/language/commands/examine.c:737 #: src/language/commands/factor.c:1934 #: src/language/commands/ks-one-sample.c:290 #: src/language/commands/means-calc.c:440 #: src/language/commands/npar-summary.c:109 src/language/commands/oneway.c:981 #: src/language/commands/t-test-indep.c:196 #: src/language/commands/t-test-one-sample.c:128 #: src/language/commands/t-test-paired.c:153 #: src/language/commands/t-test-paired.c:242 msgid "Std. Deviation" msgstr "标准差" #: src/language/commands/correlations.c:140 msgid "Pearson Correlation" msgstr "皮尔森相关" #: src/language/commands/correlations.c:141 src/language/commands/oneway.c:1172 #: src/language/commands/t-test-indep.c:268 #: src/language/commands/t-test-one-sample.c:76 #: src/language/commands/t-test-paired.c:254 msgid "Sig. (2-tailed)" msgstr "显著性 (双尾)" #: src/language/commands/correlations.c:141 src/language/commands/factor.c:1773 msgid "Sig. (1-tailed)" msgstr "显著性 (单尾)" #: src/language/commands/correlations.c:145 msgid "Cross-products" msgstr "叉积" #: src/language/commands/correlations.c:146 msgid "Covariance" msgstr "协方差" #: src/language/commands/correlations.c:159 msgid "Significant at .05 level" msgstr "" #: src/language/commands/correlations.c:218 msgid "The data for the chosen variables are all missing or empty." msgstr "用于选择变量的数据缺失或为空。" #: src/language/commands/correlations.c:358 #: src/language/commands/descriptives.c:353 msgid "No variables specified." msgstr "没有指定变量。" #: src/language/commands/count.c:125 msgid "Destination cannot be a string variable." msgstr "字符串变量不能作目的路径使用。" #: src/language/commands/crosstabs.c:74 #: src/ui/gui/psppire-dialog-action-crosstabs.c:94 msgid "Expected" msgstr "期望值" #: src/language/commands/crosstabs.c:75 src/language/commands/ctables.c:340 #, fuzzy #| msgid "row %" msgid "Row %" msgstr "行 %" #: src/language/commands/crosstabs.c:76 src/language/commands/ctables.c:341 #, fuzzy #| msgid "column %" msgid "Column %" msgstr "列 %" #: src/language/commands/crosstabs.c:77 #, fuzzy #| msgid "total %" msgid "Total %" msgstr "总计 %" #: src/language/commands/crosstabs.c:79 #: src/ui/gui/psppire-dialog-action-crosstabs.c:96 msgid "Std. Residual" msgstr "标准残差" #: src/language/commands/crosstabs.c:80 #, fuzzy #| msgid "Adjusted Std. Residual" msgid "Adjusted Residual" msgstr "调整后标准残差" #: src/language/commands/crosstabs.c:483 msgid "At least one crosstabulation must be requested (using the TABLES subcommand)." msgstr "" #: src/language/commands/crosstabs.c:500 #, c-format msgid "Missing mode %s not allowed in general mode. Assuming %s." msgstr "缺少的模式%s在通用模式中不被允许，假定为%s。" #: src/language/commands/crosstabs.c:590 #, fuzzy #| msgid "expecting a file name or handle name" msgid "Syntax error expecting subcommand name or variable name." msgstr "要求一个文件名或句柄名" #: src/language/commands/crosstabs.c:622 msgid "Too many cross-tabulation variables or dimensions." msgstr "过多交叉表变量或维度。" #: src/language/commands/crosstabs.c:684 #, c-format msgid "%s must be specified before %s." msgstr "%s必须先于%s之前设定。" #: src/language/commands/crosstabs.c:1065 #, fuzzy #| msgid "Summary." msgid "Summary" msgstr "总结。" #: src/language/commands/crosstabs.c:1070 src/language/commands/examine.c:911 #: src/language/commands/frequencies.c:280 #: src/language/commands/frequencies.c:1230 #: src/language/commands/logistic.c:1243 src/language/commands/means.c:714 #: src/language/commands/reliability.c:492 msgid "Percent" msgstr "百分比" #: src/language/commands/crosstabs.c:1073 src/language/commands/examine.c:913 #: src/language/commands/means.c:698 src/language/commands/reliability.c:495 #: src/language/commands/sys-file-info.c:222 msgid "Cases" msgstr "个案" #: src/language/commands/crosstabs.c:1074 src/language/commands/examine.c:913 #: src/language/commands/frequencies.c:297 #: src/language/commands/frequencies.c:1330 #: src/language/commands/quick-cluster.c:716 #: src/language/commands/reliability.c:495 msgid "Valid" msgstr "有效" #: src/language/commands/crosstabs.c:1074 src/language/commands/ctables.c:375 #: src/language/commands/examine.c:913 src/language/commands/frequencies.c:312 #: src/language/commands/frequencies.c:1331 msgid "Missing" msgstr "缺失" #: src/language/commands/crosstabs.c:1078 #, fuzzy #| msgid "Crosstabs" msgid "Crosstabulation" msgstr "交叉表" #: src/language/commands/crosstabs.c:1157 #, c-format msgid "Crosstabulation %s contained no non-missing cases." msgstr "交叉表%s不含非缺失值。" #: src/language/commands/crosstabs.c:1343 #, fuzzy #| msgid "Missing Values" msgid "Missing value" msgstr "缺失值" #: src/language/commands/crosstabs.c:1422 #, fuzzy #| msgid "Chi-Square Test" msgid "Chi-Square Tests" msgstr "卡方检验" #: src/language/commands/crosstabs.c:1427 msgid "Pearson Chi-Square" msgstr "Pearson卡方" #: src/language/commands/crosstabs.c:1428 msgid "Likelihood Ratio" msgstr "似然比例" #: src/language/commands/crosstabs.c:1429 msgid "Fisher's Exact Test" msgstr "Fisher精确检验" #: src/language/commands/crosstabs.c:1430 msgid "Continuity Correction" msgstr "连续性校正" #: src/language/commands/crosstabs.c:1431 msgid "Linear-by-Linear Association" msgstr "线性对线性关联" #: src/language/commands/crosstabs.c:1432 #: src/language/commands/crosstabs.c:1477 #: src/language/commands/crosstabs.c:1997 msgid "N of Valid Cases" msgstr "有效个案N" #: src/language/commands/crosstabs.c:1438 #, fuzzy #| msgid "Asymp. Sig. (2-tailed)" msgid "Asymptotic Sig. (2-tailed)" msgstr "渐进显著度(双尾)" #: src/language/commands/crosstabs.c:1452 #, fuzzy #| msgid "Symmetric measures." msgid "Symmetric Measures" msgstr "对称性测度。" #: src/language/commands/crosstabs.c:1456 #: src/language/commands/crosstabs.c:1495 #: src/language/commands/crosstabs.c:1541 #, fuzzy #| msgid "_Values" msgid "Values" msgstr "值(_V)" #: src/language/commands/crosstabs.c:1458 #: src/language/commands/crosstabs.c:1543 msgid "Asymp. Std. Error" msgstr "渐进标准误" #: src/language/commands/crosstabs.c:1459 #: src/language/commands/crosstabs.c:1544 msgid "Approx. T" msgstr "近似 T" #: src/language/commands/crosstabs.c:1460 #: src/language/commands/crosstabs.c:1545 msgid "Approx. Sig." msgstr "近似显著度" #: src/language/commands/crosstabs.c:1465 #: src/language/commands/crosstabs.c:1550 msgid "Nominal by Nominal" msgstr "名称变量对名称变量" #: src/language/commands/crosstabs.c:1466 msgid "Phi" msgstr "Phi" #: src/language/commands/crosstabs.c:1466 msgid "Cramer's V" msgstr "Cramer's V" #: src/language/commands/crosstabs.c:1466 msgid "Contingency Coefficient" msgstr "列联相关系数" #: src/language/commands/crosstabs.c:1468 #: src/language/commands/crosstabs.c:1555 msgid "Ordinal by Ordinal" msgstr "顺序变量对顺序变量" #: src/language/commands/crosstabs.c:1469 msgid "Kendall's tau-b" msgstr "Kendall氏tau-b" #: src/language/commands/crosstabs.c:1469 msgid "Kendall's tau-c" msgstr "Kendall氏tau-c" #: src/language/commands/crosstabs.c:1470 #: src/ui/gui/psppire-dialog-action-crosstabs.c:81 msgid "Gamma" msgstr "Gamma" #: src/language/commands/crosstabs.c:1470 msgid "Spearman Correlation" msgstr "Spearman相关" #: src/language/commands/crosstabs.c:1472 msgid "Interval by Interval" msgstr "等距变量对等距变量" #: src/language/commands/crosstabs.c:1473 msgid "Pearson's R" msgstr "Pearson氏R" #: src/language/commands/crosstabs.c:1475 msgid "Measure of Agreement" msgstr "一致性检验" #: src/language/commands/crosstabs.c:1476 #: src/ui/gui/psppire-dialog-action-crosstabs.c:83 msgid "Kappa" msgstr "Kappa" #: src/language/commands/crosstabs.c:1491 #, fuzzy #| msgid "Risk estimate." msgid "Risk Estimate" msgstr "风险估计。" #: src/language/commands/crosstabs.c:1499 #, fuzzy, no-c-format #| msgid "95%% Confidence Interval" msgid "95% Confidence Interval" msgstr "95%%置信区间" #: src/language/commands/crosstabs.c:1500 src/language/commands/logistic.c:1094 #: src/language/commands/t-test-indep.c:274 #: src/language/commands/t-test-one-sample.c:83 #: src/language/commands/t-test-paired.c:249 msgid "Lower" msgstr "下限" #: src/language/commands/crosstabs.c:1501 src/language/commands/logistic.c:1094 #: src/language/commands/t-test-indep.c:275 #: src/language/commands/t-test-one-sample.c:84 #: src/language/commands/t-test-paired.c:250 msgid "Upper" msgstr "上限" #: src/language/commands/crosstabs.c:1520 msgid "Symmetric" msgstr "对称性" #: src/language/commands/crosstabs.c:1522 #: src/language/commands/crosstabs.c:1527 #, c-format msgid "%s Dependent" msgstr "%s 依赖性" #: src/language/commands/crosstabs.c:1537 #, fuzzy #| msgid "Directional measures." msgid "Directional Measures" msgstr "方向性测度。" #: src/language/commands/crosstabs.c:1551 #: src/language/commands/ks-one-sample.c:295 #: src/ui/gui/psppire-dialog-action-crosstabs.c:76 msgid "Lambda" msgstr "Lambda" #: src/language/commands/crosstabs.c:1552 msgid "Goodman and Kruskal tau" msgstr "Goodman和Kruskal氏tau" #: src/language/commands/crosstabs.c:1553 msgid "Uncertainty Coefficient" msgstr "不确定性系数" #: src/language/commands/crosstabs.c:1556 msgid "Somers' d" msgstr "Somers氏d" #: src/language/commands/crosstabs.c:1558 msgid "Nominal by Interval" msgstr "名义变量对定距变量" #: src/language/commands/crosstabs.c:1559 #: src/ui/gui/psppire-dialog-action-crosstabs.c:84 msgid "Eta" msgstr "Eta系数" #: src/language/commands/crosstabs.c:1969 #, fuzzy, c-format #| msgid "Odds Ratio for %s (%g / %g)" msgid "Odds Ratio for %s" msgstr "%s (%g / %g)的比值比" #: src/language/commands/crosstabs.c:1978 #, fuzzy, c-format #| msgid "For cohort %s = %.*g" msgid "For cohort %s = " msgstr "%s = %.*g 定群" #: src/language/commands/ctables.c:253 msgid "Support for LCL, UCL, and SE summary functions is not yet implemented." msgstr "" #: src/language/commands/ctables.c:298 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting summary function name." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/commands/ctables.c:330 #, fuzzy #| msgid "Adjusted R Square" msgid "Adjusted Count" msgstr "调整后的R平方" #: src/language/commands/ctables.c:330 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Count" msgstr "未加权" #: src/language/commands/ctables.c:335 #, fuzzy #| msgid "Variable %zu" msgid "Table %" msgstr "变量 %zu" #: src/language/commands/ctables.c:335 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Table %" msgstr "未加权个案" #: src/language/commands/ctables.c:336 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:336 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer %" msgstr "未加权个案" #: src/language/commands/ctables.c:337 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Row %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:337 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer Row %" msgstr "未加权个案" #: src/language/commands/ctables.c:338 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Column %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:338 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer Column %" msgstr "未加权个案" #: src/language/commands/ctables.c:339 msgid "Subtable %" msgstr "" #: src/language/commands/ctables.c:339 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Subtable %" msgstr "未加权个案" #: src/language/commands/ctables.c:340 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Row %" msgstr "未加权" #: src/language/commands/ctables.c:341 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Column %" msgstr "未加权" #: src/language/commands/ctables.c:348 #, fuzzy #| msgid "Valid N" msgid "Table Valid N %" msgstr "有效N" #: src/language/commands/ctables.c:348 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Table Valid N %" msgstr "未加权个案" #: src/language/commands/ctables.c:349 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Valid N %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:349 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer Valid N %" msgstr "未加权个案" #: src/language/commands/ctables.c:350 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Row Valid N %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:350 msgid "Unweighted Layer Row Valid N %" msgstr "" #: src/language/commands/ctables.c:351 msgid "Layer Column Valid N %" msgstr "" #: src/language/commands/ctables.c:351 msgid "Unweighted Layer Column Valid N %" msgstr "" #: src/language/commands/ctables.c:352 msgid "Subtable Valid N %" msgstr "" #: src/language/commands/ctables.c:352 msgid "Unweighted Subtable Valid N %" msgstr "" #: src/language/commands/ctables.c:353 #, fuzzy #| msgid "Valid N" msgid "Row Valid N %" msgstr "有效N" #: src/language/commands/ctables.c:353 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Row Valid N %" msgstr "未加权个案" #: src/language/commands/ctables.c:354 #, fuzzy #| msgid "Valid N" msgid "Column Valid N %" msgstr "有效N" #: src/language/commands/ctables.c:354 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Column Valid N %" msgstr "未加权个案" #: src/language/commands/ctables.c:361 msgid "Table Total N %" msgstr "" #: src/language/commands/ctables.c:361 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Table Total N %" msgstr "未加权个案" #: src/language/commands/ctables.c:362 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Total N %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:362 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer Total N %" msgstr "未加权个案" #: src/language/commands/ctables.c:363 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Row Total N %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:363 msgid "Unweighted Layer Row Total N %" msgstr "" #: src/language/commands/ctables.c:364 msgid "Layer Column Total N %" msgstr "" #: src/language/commands/ctables.c:364 msgid "Unweighted Layer Column Total N %" msgstr "" #: src/language/commands/ctables.c:365 msgid "Subtable Total N %" msgstr "" #: src/language/commands/ctables.c:365 msgid "Unweighted Subtable Total N %" msgstr "" #: src/language/commands/ctables.c:366 #, fuzzy #| msgid "total %" msgid "Row Total N %" msgstr "总计 %" #: src/language/commands/ctables.c:366 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Row Total N %" msgstr "未加权个案" #: src/language/commands/ctables.c:367 #, fuzzy #| msgid "Column Number: %d" msgid "Column Total N %" msgstr "列编号：%d" #: src/language/commands/ctables.c:367 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Column Total N %" msgstr "未加权个案" #: src/language/commands/ctables.c:371 src/language/commands/descriptives.c:117 #: src/language/commands/examine.c:737 src/language/commands/frequencies.c:109 #: src/language/commands/graph.c:212 src/language/commands/ks-one-sample.c:285 #: src/language/commands/means-calc.c:448 #: src/language/commands/npar-summary.c:110 src/language/commands/oneway.c:990 #: src/ui/gui/psppire-dialog-action-descriptives.c:42 #: src/ui/gui/psppire-dialog-action-frequencies.c:43 msgid "Maximum" msgstr "最大值" #: src/language/commands/ctables.c:372 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Mean" msgstr "未加权" #: src/language/commands/ctables.c:373 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Median" msgstr "未加权" #: src/language/commands/ctables.c:374 src/language/commands/descriptives.c:116 #: src/language/commands/examine.c:737 src/language/commands/frequencies.c:108 #: src/language/commands/graph.c:213 src/language/commands/ks-one-sample.c:285 #: src/language/commands/means-calc.c:447 #: src/language/commands/npar-summary.c:110 src/language/commands/oneway.c:990 #: src/ui/gui/psppire-dialog-action-descriptives.c:41 #: src/ui/gui/psppire-dialog-action-frequencies.c:42 msgid "Minimum" msgstr "最小值" #: src/language/commands/ctables.c:375 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Missing" msgstr "未加权个案" #: src/language/commands/ctables.c:376 src/language/commands/frequencies.c:100 #: src/ui/gui/psppire-dialog-action-frequencies.c:49 msgid "Mode" msgstr "众数" #: src/language/commands/ctables.c:376 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Mode" msgstr "未加权" #: src/language/commands/ctables.c:378 src/language/commands/descriptives.c:115 #: src/language/commands/examine.c:737 src/language/commands/frequencies.c:107 #: src/language/commands/means-calc.c:449 #: src/ui/gui/psppire-dialog-action-descriptives.c:43 #: src/ui/gui/psppire-dialog-action-frequencies.c:48 msgid "Range" msgstr "极差" #: src/language/commands/ctables.c:379 #, fuzzy #| msgid "Std. Error Mean" msgid "Std Error of Mean" msgstr "均值标准误" #: src/language/commands/ctables.c:379 #, fuzzy #| msgid "Std. Error Mean" msgid "Unweighted Std Error of Mean" msgstr "均值标准误" #: src/language/commands/ctables.c:380 #, fuzzy #| msgid "Std. Deviation" msgid "Std Deviation" msgstr "标准差" #: src/language/commands/ctables.c:380 #, fuzzy #| msgid "Std. Deviation" msgid "Unweighted Std Deviation" msgstr "标准差" #: src/language/commands/ctables.c:381 src/language/commands/descriptives.c:118 #: src/language/commands/frequencies.c:110 src/language/commands/graph.c:211 #: src/language/commands/means-calc.c:446 #: src/ui/gui/psppire-dialog-action-descriptives.c:44 #: src/ui/gui/psppire-dialog-action-frequencies.c:53 msgid "Sum" msgstr "和" #: src/language/commands/ctables.c:381 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Sum" msgstr "未加权" #: src/language/commands/ctables.c:382 #, fuzzy #| msgid "Total" msgid "Total N" msgstr "总计" #: src/language/commands/ctables.c:383 #, fuzzy #| msgid "Adjusted Std. Residual" msgid "Adjusted Total N" msgstr "调整后标准残差" #: src/language/commands/ctables.c:384 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Total N" msgstr "未加权" #: src/language/commands/ctables.c:385 msgid "Valid N" msgstr "有效N" #: src/language/commands/ctables.c:386 #, fuzzy #| msgid "Valid N" msgid "Adjusted Valid N" msgstr "有效N" #: src/language/commands/ctables.c:387 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Valid N" msgstr "未加权" #: src/language/commands/ctables.c:388 src/language/commands/descriptives.c:110 #: src/language/commands/examine.c:736 src/language/commands/frequencies.c:102 #: src/language/commands/means-calc.c:450 #: src/ui/gui/psppire-dialog-action-descriptives.c:46 #: src/ui/gui/psppire-dialog-action-frequencies.c:45 msgid "Variance" msgstr "方差" #: src/language/commands/ctables.c:388 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Variance" msgstr "未加权个案" #: src/language/commands/ctables.c:392 msgid "Table Sum %" msgstr "" #: src/language/commands/ctables.c:392 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Table Sum %" msgstr "未加权个案" #: src/language/commands/ctables.c:393 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Sum %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:393 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer Sum %" msgstr "未加权个案" #: src/language/commands/ctables.c:394 #, fuzzy #| msgid "Layer %d of %d" msgid "Layer Row Sum %" msgstr "层%d，位于%d内" #: src/language/commands/ctables.c:394 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Layer Row Sum %" msgstr "未加权个案" #: src/language/commands/ctables.c:395 #, fuzzy #| msgid "Column Number: %d" msgid "Layer Column Sum %" msgstr "列编号：%d" #: src/language/commands/ctables.c:395 msgid "Unweighted Layer Column Sum %" msgstr "" #: src/language/commands/ctables.c:396 msgid "Subtable Sum %" msgstr "" #: src/language/commands/ctables.c:396 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Subtable Sum %" msgstr "未加权个案" #: src/language/commands/ctables.c:397 msgid "Row Sum %" msgstr "" #: src/language/commands/ctables.c:397 #, fuzzy #| msgid "Unweighted" msgid "Unweighted Row Sum %" msgstr "未加权" #: src/language/commands/ctables.c:398 #, fuzzy #| msgid "Column Number: %d" msgid "Column Sum %" msgstr "列编号：%d" #: src/language/commands/ctables.c:398 #, fuzzy #| msgid "Unweighted Cases" msgid "Unweighted Column Sum %" msgstr "未加权个案" #: src/language/commands/ctables.c:429 #, fuzzy, c-format #| msgid "Percentiles" msgid "Percentile %.2f" msgstr "百分位" #: src/language/commands/ctables.c:430 #, c-format msgid "Unweighted Percentile %.2f" msgstr "" #: src/language/commands/ctables.c:894 #, fuzzy #| msgid "expecting number or string" msgid "Syntax error expecting number or string or range." msgstr "要求数字或字符串" #: src/language/commands/ctables.c:924 #, fuzzy #| msgid "Syntax error in date field." msgid "Syntax error in postcompute expression." msgstr "日期字段语法错误。" #: src/language/commands/ctables.c:951 src/language/expressions/parse.c:808 #, fuzzy #| msgid "The exponentiation operator (`**') is left-associative, even though right-associative semantics are more useful. That is, `a**b**c' equals `(a**b)**c', not as `a**(b**c)'. To disable this warning, insert parentheses." msgid "The exponentiation operator (`**') is left-associative: `a**b**c' equals `(a**b)**c', not `a**(b**c)'. To disable this warning, insert parentheses." msgstr "指数运算符(`**')为向左结合运算符。意味着`a**b**c'=`(a**b)**c'，而是不`a**(b**c)'。请使用括号以使本警告信息不再出现。" #: src/language/commands/ctables.c:1162 #, c-format msgid "Summary function %s applies only to multiple response sets." msgstr "" #: src/language/commands/ctables.c:1164 #, fuzzy, c-format #| msgid "No multiple response set named %s." msgid "'%s' is not a multiple response set." msgstr "没有找到名称为%s的多重响应集。" #: src/language/commands/ctables.c:1173 #, fuzzy, c-format #| msgid "MRSET %s has only one variable." msgid "Summary function %s applies only to scale variables." msgstr "多重响应数据集(MRSETS)%s只有一个变量。" #: src/language/commands/ctables.c:1175 #, fuzzy, c-format #| msgid "%s is not a variable name." msgid "'%s' is not a scale variable." msgstr "%s不是有效的变量名。" #: src/language/commands/ctables.c:1243 #, fuzzy #| msgid "Active file compression is not implemented." msgid "Multiple response set support not implemented." msgstr "活动文件压缩功能未实现。" #: src/language/commands/ctables.c:1262 #, fuzzy, c-format #| msgid "Ignoring string variable `%s' set as weighting variable." msgid "Cannot use string variable %s as a scale variable." msgstr "忽略作为权重变量的字符串变量`%s'。" #: src/language/commands/ctables.c:1317 #, c-format msgid "Output format %s requires width 2 or greater." msgstr "" #: src/language/commands/ctables.c:1322 #, c-format msgid "Output format %s requires width greater than decimals." msgstr "" #: src/language/commands/ctables.c:1482 #, fuzzy #| msgid "Cannot create variable." msgid "Cannot nest scale variables." msgstr "无法创建变量。" #: src/language/commands/ctables.c:1483 #, fuzzy #| msgid "%s is not a variable name." msgid "This is an outer scale variable." msgstr "%s不是有效的变量名。" #: src/language/commands/ctables.c:1484 #, fuzzy #| msgid "%s is a duplicate variable name." msgid "This is an inner scale variable." msgstr "变量名称%s重复。" #: src/language/commands/ctables.c:1493 msgid "Summaries may only be requested for categorical variables at the innermost nesting level." msgstr "" #: src/language/commands/ctables.c:1496 msgid "This outer categorical variable has a summary." msgstr "" #: src/language/commands/ctables.c:1786 #, fuzzy #| msgid "total %" msgid "Subtotal" msgstr "总计 %" #: src/language/commands/ctables.c:1883 #, fuzzy, c-format #| msgid "Unknown command `%s'." msgid "Unknown postcompute &%s." msgstr "未知指令`%s'。" #: src/language/commands/ctables.c:1894 #, fuzzy #| msgid "Syntax error in date field." msgid "Syntax error expecting category specification." msgstr "日期字段语法错误。" #: src/language/commands/ctables.c:1912 #, c-format msgid "Failed to parse category specification as format %s: %s." msgstr "" #: src/language/commands/ctables.c:2247 #, c-format msgid "These categories include %zu instance of SUBTOTAL or HSUBTOTAL, so references from computed categories must refer to subtotals by position, e.g. SUBTOTAL[1]." msgid_plural "These categories include %zu instances of SUBTOTAL or HSUBTOTAL, so references from computed categories must refer to subtotals by position, e.g. SUBTOTAL[1]." msgstr[0] "" #: src/language/commands/ctables.c:2260 msgid "This is the reference that lacks a position." msgstr "" #: src/language/commands/ctables.c:2266 #, c-format msgid "Computed category &%s references a category not included in the category list." msgstr "" #: src/language/commands/ctables.c:2269 msgid "This is the missing category." msgstr "" #: src/language/commands/ctables.c:2272 msgid "To fix the problem, add subtotals to the list of categories here." msgstr "" #: src/language/commands/ctables.c:2275 msgid "To fix the problem, add TOTAL=YES to the variable's CATEGORIES specification." msgstr "" #: src/language/commands/ctables.c:2279 msgid "To fix the problem, add the missing category to the list of categories here." msgstr "" #: src/language/commands/ctables.c:4038 #, c-format msgid "This category specification may be applied only to string variables, but this subcommand tries to apply it to numeric variable %s." msgstr "" #: src/language/commands/ctables.c:4178 #, fuzzy #| msgid "Active file compression is not implemented." msgid "Data-dependent sorting is not implemented." msgstr "活动文件压缩功能未实现。" #: src/language/commands/ctables.c:4342 #, c-format msgid "This category specification may be applied only to numeric variables, but this subcommand tries to apply it to string variable %s." msgstr "" #: src/language/commands/ctables.c:4583 src/ui/gui/ctables.ui:20 #, fuzzy #| msgid "Custom" msgid "Custom Tables" msgstr "自定义" #: src/language/commands/ctables.c:4613 #, fuzzy #| msgid "Category" msgid "Row Categories" msgstr "类别" #: src/language/commands/ctables.c:4614 msgid "Column Categories" msgstr "" #: src/language/commands/ctables.c:4634 src/language/commands/matrix.c:5694 #: src/language/commands/matrix.c:6027 src/language/commands/matrix.c:8546 #, fuzzy #| msgid "_Rows" msgid "Rows" msgstr "行(_R)" #: src/language/commands/ctables.c:4635 src/language/commands/data-parser.c:727 #: src/language/commands/matrix.c:5696 src/language/commands/matrix.c:6027 #: src/language/commands/matrix.c:8546 src/language/commands/print.c:451 #: src/ui/gui/psppire-var-sheet-header.c:76 msgid "Columns" msgstr "列" #: src/language/commands/ctables.c:4636 msgid "Layers" msgstr "" #: src/language/commands/ctables.c:4978 msgid "Category labels may not be moved to another axis when sorting by a summary function." msgstr "" #: src/language/commands/ctables.c:4981 src/language/commands/ctables.c:4998 #: src/language/commands/ctables.c:5019 src/language/commands/ctables.c:5031 #: src/language/commands/ctables.c:5042 msgid "This syntax moves category labels to another axis." msgstr "" #: src/language/commands/ctables.c:4983 msgid "This syntax requests sorting by a summary function." msgstr "" #: src/language/commands/ctables.c:4994 #, c-format msgid "To move category labels from one axis to another, the variables whose labels are to be moved must be categorical, but %s is scale." msgstr "" #: src/language/commands/ctables.c:5012 #, c-format msgid "To move category labels from one axis to another, the variables whose labels are to be moved must all have the same width, but %s has width %d and %s has width %d." msgstr "" #: src/language/commands/ctables.c:5025 #, c-format msgid "To move category labels from one axis to another, the variables whose labels are to be moved must all have the same value labels, but %s and %s have different value labels." msgstr "" #: src/language/commands/ctables.c:5036 #, c-format msgid "To move category labels from one axis to another, the variables whose labels are to be moved must all have the same category specifications, but %s and %s have different category specifications." msgstr "" #: src/language/commands/ctables.c:5770 #, c-format msgid "New definition of &%s will override the previous definition." msgstr "" #: src/language/commands/ctables.c:5773 msgid "This is the previous definition." msgstr "" #: src/language/commands/ctables.c:5863 #, fuzzy, c-format #| msgid "Unknown format type `%s'." msgid "Unknown computed category &%s." msgstr "未知的格式类型`%s'。" #: src/language/commands/ctables.c:6152 msgid "MINCOLWIDTH must not be greater than MAXCOLWIDTH." msgstr "" #: src/language/commands/ctables.c:6274 msgid "TABLE must appear before this subcommand." msgstr "" #: src/language/commands/ctables.c:6355 msgid "At least one variable must be specified." msgstr "至少指定一个变量。" #: src/language/commands/ctables.c:6369 msgid "Scale variables may appear only on one axis." msgstr "" #: src/language/commands/ctables.c:6372 msgid "This scale variable appears on the rows axis." msgstr "" #: src/language/commands/ctables.c:6375 msgid "This scale variable appears on the columns axis." msgstr "" #: src/language/commands/ctables.c:6378 msgid "This scale variable appears on the layer axis." msgstr "" #: src/language/commands/ctables.c:6394 msgid "Summaries may appear only on one axis." msgstr "" #: src/language/commands/ctables.c:6400 msgid "This variable on the rows axis has a summary." msgstr "" #: src/language/commands/ctables.c:6402 msgid "This variable on the columns axis has a summary." msgstr "" #: src/language/commands/ctables.c:6403 msgid "This variable on the layers axis has a summary." msgstr "" #: src/language/commands/ctables.c:6406 msgid "This is a scale variable, so it always has a summary even if the syntax does not explicitly specify one." msgstr "" #: src/language/commands/ctables.c:6507 msgid "ROWLABELS and COLLABELS may not both be specified." msgstr "" #: src/language/commands/ctables.c:6512 #, fuzzy #| msgid "`%s': bad font specification" msgid "This is the first specification." msgstr "%s': 字体设置错误" #: src/language/commands/ctables.c:6514 #, fuzzy #| msgid "`%s': bad font specification" msgid "This is the second specification." msgstr "%s': 字体设置错误" #: src/language/commands/ctables.c:6632 #, fuzzy #| msgid "%s is not yet implemented." msgid "Support for SIGTEST not yet implemented." msgstr "%s尚未实现。" #: src/language/commands/ctables.c:6779 #, fuzzy #| msgid "%s is not yet implemented." msgid "Support for COMPARETEST not yet implemented." msgstr "%s尚未实现。" #: src/language/commands/ctables.c:6796 #, fuzzy #| msgid "This command cannot appear outside %s...%s." msgid "This subcommand must appear before TABLE." msgstr "该指令不能处于%s...%s之外。" #: src/language/commands/data-list.c:144 #, c-format msgid "The %s subcommand may only be used within %s." msgstr "子指令%s仅可在%s内使用。" #: src/language/commands/data-list.c:194 msgid "Only one of FIXED, FREE, or LIST may be specified." msgstr "FIXED、FREE和LIST仅可指定一个。" #: src/language/commands/data-list.c:221 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting TAB or delimiter string." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/commands/data-list.c:265 msgid "Encoding should not be specified for inline data. It will be ignored." msgstr "内联数据无须设定编码，设置将被忽略。" #: src/language/commands/data-list.c:274 #, c-format msgid "The %s subcommand may be used only with %s." msgstr "%s子命令仅可与%s一起使用。" #: src/language/commands/data-list.c:364 #, fuzzy, c-format #| msgid "Cannot place variable %s on record %d when RECORDS=%d is specified." msgid "Cannot advance to record %d when RECORDS=%d is specified." msgstr "不能将变量%s置于记录%d，因为已设定RECORDS=%d。" #: src/language/commands/data-list.c:415 src/language/commands/data-list.c:544 #: src/language/commands/get-data.c:591 #, c-format msgid "%s is a duplicate variable name." msgstr "变量名称%s重复。" #: src/language/commands/data-list.c:423 #, c-format msgid "There is already a variable %s of a different type." msgstr "变量名称%s已存在，且类型不同。" #: src/language/commands/data-list.c:430 #, c-format msgid "There is already a string variable %s of a different width." msgstr "字符串变量%s已存在，且长度不同。" #: src/language/commands/data-list.c:439 #, c-format msgid "Cannot place variable %s on record %d when RECORDS=%d is specified." msgstr "不能将变量%s置于记录%d，因为已设定RECORDS=%d。" #: src/language/commands/data-list.c:458 msgid "No fields were specified. At least one is required." msgstr "" #: src/language/commands/data-parser.c:406 #: src/language/commands/data-parser.c:415 msgid "Quoted string extends beyond end of line." msgstr "引号内的字符串超过行末尾。" #: src/language/commands/data-parser.c:440 msgid "Missing delimiter following quoted string." msgstr "引号内的字符串后缺少分隔符。" #: src/language/commands/data-parser.c:513 #, c-format msgid "Data for variable %s is not valid as format %s: %s" msgstr "变量%s的数据格式应为%s: %s" #: src/language/commands/data-parser.c:543 #, c-format msgid "Partial case of %d of %d records discarded." msgstr "不完整个案%d的记录%d将被排除。" #: src/language/commands/data-parser.c:636 #, c-format msgid "Partial case discarded. The first variable missing was %s." msgstr "排除不完整个案。第一个缺失的变量为%s。" #: src/language/commands/data-parser.c:680 #, c-format msgid "Missing value(s) for all variables from %s onward. These will be filled with the system-missing value or blanks, as appropriate." msgstr "自%s起所有变量都有缺失值，将据情况以系统缺失值或空白填充。" #: src/language/commands/data-parser.c:702 msgid "Record ends in data not part of any field." msgstr "记录末尾的数据不属于任何字段。" #: src/language/commands/data-parser.c:717 #, c-format msgid "Reading %d record from %s." msgid_plural "Reading %d records from %s." msgstr[0] "读取%d条记录于%s。" #: src/language/commands/data-parser.c:727 src/language/commands/print.c:451 msgid "Record" msgstr "记录" #: src/language/commands/data-parser.c:727 #: src/language/commands/data-parser.c:772 src/language/commands/print.c:451 msgid "Format" msgstr "格式" #: src/language/commands/data-parser.c:767 #, c-format msgid "Reading free-form data from %s." msgstr "从%s读取不带格式的数据。" #. TRANSLATORS: this fragment will be interpolated into #. messages in fh_lock() that identify types of files. #: src/language/commands/data-reader.c:136 #: src/language/commands/data-writer.c:79 msgid "data file" msgstr "数据文件" #: src/language/commands/data-reader.c:160 #, c-format msgid "Could not open `%s' for reading as a data file: %s." msgstr "无法打开`%s'作为数据文件：%s。" #: src/language/commands/data-reader.c:174 #, c-format msgid "Could not read `%s' as a text file with encoding `%s': %s." msgstr "不能读取`%s'作为以编码`%s'的文本文件：%s。" #: src/language/commands/data-reader.c:232 #, c-format msgid "Missing %s while reading inline data. This probably indicates a missing or incorrectly formatted %s command. %s must appear by itself on a single line with exactly one space between words." msgstr "读取内联数据时找不到%s。原因可能是缺少%s指令或指令格式不正确。%s必须作为单独的行列出，单词之间以仅一个空格分隔。" #: src/language/commands/data-reader.c:252 #: src/language/commands/data-reader.c:386 #, c-format msgid "Error reading file %s: %s." msgstr "读取文件%s出错：%s。" #: src/language/commands/data-reader.c:260 #, c-format msgid "Unexpected end of file in partial record reading %s." msgstr "读取不完全记录%s时文件意外结束。" #: src/language/commands/data-reader.c:320 #, c-format msgid "Corrupt block descriptor word at offset 0x%lx in %s." msgstr "区块描述损坏于偏移量0x%lx处，位于%s中。" #: src/language/commands/data-reader.c:321 #, c-format msgid "Corrupt record descriptor word at offset 0x%lx in %s." msgstr "记录描述损坏于偏移量0x%lx处，位于%s中。" #: src/language/commands/data-reader.c:334 #, c-format msgid "Corrupt record size at offset 0x%lx in %s." msgstr "记录大小损坏于偏移量0x%lx处，位于%s中。" #: src/language/commands/data-reader.c:492 msgid "Record exceeds remaining block length." msgstr "记录超过剩余区块长度。" #: src/language/commands/data-reader.c:566 #, c-format msgid "Attempt to read beyond end-of-file on file %s." msgstr "试图读取超过文件%s的结尾的内容。" #: src/language/commands/data-reader.c:569 #, c-format msgid "Attempt to read beyond %s." msgstr "试图读取超过%s处的内容。" #: src/language/commands/data-reader.c:745 msgid "This command is not valid here since the current input program does not access the inline file." msgstr "指令失效，原因是输入程序无读取内联文件权限。" #: src/language/commands/data-writer.c:106 #, c-format msgid "An error occurred while opening `%s' for writing as a data file: %s." msgstr "打开`%s'作为数据文件写入时出错：%s。" #: src/language/commands/data-writer.c:243 #, c-format msgid "I/O error occurred writing data file `%s'." msgstr "写入数据文件`%s'时发生读写错误。" #: src/language/commands/dataset.c:72 #, c-format msgid "There is no dataset named %s." msgstr "没有名称为%s的数据集。" #: src/language/commands/dataset.c:252 #, fuzzy #| msgid "Dataset" msgid "Datasets" msgstr "数据集" #: src/language/commands/dataset.c:265 msgid "unnamed dataset" msgstr "未命名数据集" #: src/language/commands/date.c:33 #, c-format msgid "Only %s is currently implemented." msgstr "目前仅实现了%s功能。" #: src/language/commands/define.c:68 #, fuzzy #| msgid "The %s string must contain exactly one character." msgid "String must contain exactly one token." msgstr "字符串%s必须包含仅一个字符。" #: src/language/commands/define.c:81 msgid "Only one of !TOKENS, !CHAREND, !ENCLOSE, or !CMDEND is allowed." msgstr "" #: src/language/commands/define.c:103 msgid "Syntax error expecting macro body or !ENDDEFINE." msgstr "" #: src/language/commands/define.c:212 msgid "Positional parameters must precede keyword parameters." msgstr "" #: src/language/commands/define.c:215 msgid "Here is a previous keyword parameter." msgstr "" #: src/language/commands/define.c:228 msgid "Keyword macro parameter must be named in definition without \"!\" prefix." msgstr "" #: src/language/commands/define.c:237 #, c-format msgid "Cannot use macro keyword \"%s\" as an argument name." msgstr "" #: src/language/commands/define.c:259 msgid "!DEFAULT is allowed only once per argument." msgstr "" #: src/language/commands/delete-variables.c:39 #, c-format msgid "%s may not be used when there are pending transformations (use %s to execute transformations)." msgstr "" #: src/language/commands/delete-variables.c:47 #, fuzzy, c-format #| msgid "%s may not appear after %s." msgid "%s may not be used after %s." msgstr "%s不能出现在%s之后。" #: src/language/commands/delete-variables.c:59 #, c-format msgid "%s may not be used to delete all variables from the active dataset dictionary. Use %s instead." msgstr "%s不能用于从当前数据集字典中删除所有变量。使用%s来完成操作。" #: src/language/commands/descriptives.c:108 #: src/language/commands/frequencies.c:98 #: src/language/commands/means-calc.c:445 #: src/language/commands/t-test-indep.c:197 #: src/language/commands/t-test-one-sample.c:129 #: src/language/commands/t-test-paired.c:154 #: src/language/commands/t-test-paired.c:243 msgid "S.E. Mean" msgstr "均值标准误" #: src/language/commands/descriptives.c:109 #: src/language/commands/frequencies.c:101 #: src/output/charts/plot-hist-cairo.c:57 msgid "Std Dev" msgstr "标准差" #: src/language/commands/descriptives.c:111 src/language/commands/examine.c:738 #: src/language/commands/frequencies.c:103 #: src/language/commands/means-calc.c:451 #: src/ui/gui/psppire-dialog-action-descriptives.c:47 #: src/ui/gui/psppire-dialog-action-frequencies.c:50 msgid "Kurtosis" msgstr "峰度" #: src/language/commands/descriptives.c:112 #: src/language/commands/frequencies.c:104 #: src/language/commands/means-calc.c:452 msgid "S.E. Kurt" msgstr "峰度标准误" #: src/language/commands/descriptives.c:113 src/language/commands/examine.c:738 #: src/language/commands/frequencies.c:105 #: src/language/commands/means-calc.c:453 #: src/ui/gui/psppire-dialog-action-descriptives.c:48 #: src/ui/gui/psppire-dialog-action-frequencies.c:46 msgid "Skewness" msgstr "偏斜度" #: src/language/commands/descriptives.c:114 #: src/language/commands/frequencies.c:106 #: src/language/commands/means-calc.c:454 msgid "S.E. Skew" msgstr "偏斜度标准误" #: src/language/commands/descriptives.c:333 #, c-format msgid "Z-score variable name %s would be a duplicate variable name." msgstr "Z-分数变量名称%s与现有变量名称冲突。" #: src/language/commands/descriptives.c:385 msgid "DESCRIPTIVES with Z scores ignores TEMPORARY. Temporary transformations will be made permanent." msgstr "带Z分数的DESCRIPTIVES忽略TEMPORARY，临时变换将被保存。" #: src/language/commands/descriptives.c:543 #, fuzzy #| msgid "Ran out of generic names for Z-score variables. There are only 126 generic names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09." msgid "Ran out of generic names for Z-score variables. There are only 126 generic names: ZSC001-ZSC099, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09." msgstr "通用Z-分数变量名称不足。共有126个通用变量Z-分数变量名称：ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09。" #: src/language/commands/descriptives.c:561 #, fuzzy #| msgid "Mapping of variables to corresponding Z-scores." msgid "Mapping of Variables to Z-scores" msgstr "将变量映射到对应的Z-分数。" #: src/language/commands/descriptives.c:563 #, fuzzy #| msgid "Name" msgid "Names" msgstr "名称" #: src/language/commands/descriptives.c:564 src/language/commands/glm.c:662 #: src/language/commands/regression.c:932 msgid "Source" msgstr "源" #: src/language/commands/descriptives.c:564 msgid "Target" msgstr "目标" #: src/language/commands/descriptives.c:652 #, fuzzy, c-format #| msgid "Internal error processing Z scores" msgid "Internal error processing Z scores. Please report this to %s." msgstr "Z分数处理内部错误" #: src/language/commands/descriptives.c:737 #, c-format msgid "Z-score of %s" msgstr "%s的Z分数" #: src/language/commands/descriptives.c:991 src/language/commands/roc.c:924 msgid "Valid N (listwise)" msgstr "有效 N(含缺失值则排除)" #: src/language/commands/descriptives.c:991 #, fuzzy #| msgid "Valid N (listwise)" msgid "Missing N (listwise)" msgstr "有效 N(含缺失值则排除)" #: src/language/commands/do-if.c:66 msgid "ELSE IF is not allowed following ELSE within DO IF...END IF." msgstr "" #: src/language/commands/do-if.c:70 msgid "Only one ELSE is allowed within DO IF...END IF." msgstr "" #: src/language/commands/do-if.c:73 msgid "This is the location of the previous ELSE clause." msgstr "" #: src/language/commands/do-if.c:76 msgid "This is the location of the DO IF command." msgstr "" #: src/language/commands/do-if.c:153 #, fuzzy #| msgid "This command cannot appear outside %s...%s." msgid "This command cannot appear outside DO IF...END IF." msgstr "该指令不能处于%s...%s之外。" #: src/language/commands/examine.c:67 msgid " (missing)" msgstr " (缺失)" #: src/language/commands/examine.c:214 #, c-format msgid "Boxplot of %s vs. %s" msgstr "%s对%s箱线图" #: src/language/commands/examine.c:220 src/language/commands/examine.c:327 #, c-format msgid "Boxplot of %s" msgstr "%s的箱线图" #: src/language/commands/examine.c:310 msgid "Boxplot" msgstr "箱线图" #: src/language/commands/examine.c:407 msgid "Not creating NP plot because data set is empty." msgstr "因数据为空，不能绘制NP图。" #: src/language/commands/examine.c:467 #, c-format msgid "Not creating spreadlevel chart for %s" msgstr "将不绘制%s的变异水平图" #: src/language/commands/examine.c:574 #, fuzzy #| msgid "Last non-missing value" msgid "User-missing value." msgstr "最后一个非缺失值" #: src/language/commands/examine.c:580 src/language/commands/examine.c:583 #: src/language/commands/frequencies.c:1346 msgid "Percentiles" msgstr "百分位" #: src/language/commands/examine.c:591 msgid "Weighted Average" msgstr "加权平均值" #: src/language/commands/examine.c:591 msgid "Tukey's Hinges" msgstr "Tukey值域法" #: src/language/commands/examine.c:598 src/language/commands/examine.c:672 #: src/language/commands/examine.c:745 src/language/commands/examine.c:843 #: src/language/commands/examine.c:922 src/language/commands/mann-whitney.c:200 #: src/language/commands/median.c:319 src/language/commands/t-test-indep.c:227 #: src/language/commands/t-test-indep.c:282 #: src/language/commands/t-test-one-sample.c:87 #, fuzzy #| msgid "_Dependent Variable" msgid "Dependent Variables" msgstr "因变量(_D)" #: src/language/commands/examine.c:657 #, fuzzy #| msgid "Dev from Normal" msgid "Tests of Normality" msgstr "偏离正态值" #: src/language/commands/examine.c:660 msgid "Shapiro-Wilk" msgstr "" #: src/language/commands/examine.c:661 src/language/commands/examine.c:725 #: src/ui/gui/psppire-checkbox-treeview.c:73 msgid "Statistic" msgstr "统计量" #: src/language/commands/examine.c:663 src/language/commands/factor.c:1972 #: src/language/commands/glm.c:659 src/language/commands/logistic.c:1086 #: src/language/commands/oneway.c:907 src/language/commands/oneway.c:1083 #: src/language/commands/oneway.c:1302 src/language/commands/regression.c:808 #: src/language/commands/regression.c:930 #: src/language/commands/t-test-indep.c:263 #: src/language/commands/t-test-paired.c:196 msgid "Sig." msgstr "显著性" #: src/language/commands/examine.c:724 msgid "Aspect" msgstr "" #: src/language/commands/examine.c:725 src/language/commands/oneway.c:982 #: src/language/commands/oneway.c:1169 src/language/commands/oneway.c:1301 #: src/language/commands/regression.c:804 src/language/commands/roc.c:871 msgid "Std. Error" msgstr "标准误" #: src/language/commands/examine.c:731 src/language/commands/oneway.c:985 #, c-format msgid "%g%% Confidence Interval for Mean" msgstr "均值的%g%%置信区间" #: src/language/commands/examine.c:733 src/language/commands/oneway.c:987 #: src/language/commands/oneway.c:1308 src/language/commands/regression.c:815 #: src/language/commands/roc.c:878 msgid "Lower Bound" msgstr "下限" #: src/language/commands/examine.c:734 src/language/commands/oneway.c:988 #: src/language/commands/oneway.c:1309 src/language/commands/regression.c:816 #: src/language/commands/roc.c:879 msgid "Upper Bound" msgstr "上限" #: src/language/commands/examine.c:736 msgid "5% Trimmed Mean" msgstr "去除两端5%数据后的均值" #: src/language/commands/examine.c:738 msgid "Interquartile Range" msgstr "分区数区间" #: src/language/commands/examine.c:818 msgid "Extreme Values" msgstr "极值" #: src/language/commands/examine.c:825 src/language/commands/list.c:91 #: src/language/commands/quick-cluster.c:610 msgid "Case Number" msgstr "个案数" #: src/language/commands/examine.c:829 #, fuzzy #| msgid "Order by" msgid "Order" msgstr "排序方式" #. TRANSLATORS: This is a noun, not an adjective. #: src/language/commands/examine.c:835 #, fuzzy #| msgid "_Extremes" msgid "Extreme" msgstr "极值(_E)" #: src/language/commands/examine.c:836 msgid "Highest" msgstr "最高" #: src/language/commands/examine.c:836 msgid "Lowest" msgstr "最低" #: src/language/commands/examine.c:906 src/language/commands/logistic.c:1239 #: src/language/commands/means.c:695 src/language/commands/reliability.c:487 msgid "Case Processing Summary" msgstr "个案处理总结" #: src/language/commands/examine.c:1703 #, fuzzy, c-format #| msgid "%s and %s are mutually exclusive" msgid "%s and %s are mutually exclusive." msgstr "%s与%s互斥" #: src/language/commands/factor.c:1029 #, c-format msgid "Matrix input for %s must be either COV or CORR" msgstr "%s 的矩阵输入必需为COV或CORR" #: src/language/commands/factor.c:1393 msgid "Factor analysis on a single variable is not useful." msgstr "对单个变量进行因子分析毫无意义。" #: src/language/commands/factor.c:1495 msgid "Component Number" msgstr "成分数量" #: src/language/commands/factor.c:1495 msgid "Factor Number" msgstr "因子数量" #: src/language/commands/factor.c:1509 src/language/commands/factor.c:1512 msgid "Communalities" msgstr "公因子方差比" #: src/language/commands/factor.c:1514 msgid "Initial" msgstr "初始解" #: src/language/commands/factor.c:1516 msgid "Extraction" msgstr "提取" #: src/language/commands/factor.c:1558 src/language/commands/factor.c:1637 #: src/language/commands/factor.c:1699 msgid "Component" msgstr "成分" #: src/language/commands/factor.c:1613 msgid "Total Variance Explained" msgstr "方差贡献率" #: src/language/commands/factor.c:1618 #, no-c-format msgid "% of Variance" msgstr "方差百分比" #: src/language/commands/factor.c:1620 #, no-c-format msgid "Cumulative %" msgstr "累积百分比" #: src/language/commands/factor.c:1623 msgid "Phase" msgstr "" #: src/language/commands/factor.c:1625 msgid "Initial Eigenvalues" msgstr "初始解特征根" #: src/language/commands/factor.c:1629 msgid "Extraction Sums of Squared Loadings" msgstr "提取载荷平方和" #: src/language/commands/factor.c:1633 msgid "Rotation Sums of Squared Loadings" msgstr "旋转载荷平方和" #: src/language/commands/factor.c:1695 msgid "Factor Correlation Matrix" msgstr "因子相关矩阵" #: src/language/commands/factor.c:1702 #, fuzzy #| msgid "Factor" msgid "Factor 2" msgstr "因子" #: src/language/commands/factor.c:1734 msgid "Anti-Image Matrices" msgstr "反映像矩阵" #: src/language/commands/factor.c:1739 msgid "Anti-image Covariance" msgstr "反映象协方差" #: src/language/commands/factor.c:1740 msgid "Anti-image Correlation" msgstr "反映象相关" #: src/language/commands/factor.c:1761 msgid "Correlation Matrix" msgstr "相关矩阵" #: src/language/commands/factor.c:1770 #: src/language/commands/t-test-paired.c:195 msgid "Correlation" msgstr "相关" #: src/language/commands/factor.c:1808 msgid "Determinant" msgstr "行列式" #: src/language/commands/factor.c:1821 msgid "Covariance Matrix" msgstr "协方差矩阵" #: src/language/commands/factor.c:1853 msgid "The dataset contains no complete observations. No analysis will be performed." msgstr "数据集没有包含完整的观测值。将不进行数据分析。" #: src/language/commands/factor.c:1877 #, fuzzy #| msgid "The dataset has no complete covariance or correlation matrix." msgid "The dataset has no covariance matrix or a correlation matrix along with standard deviations." msgstr "数据不具有完全协方差或相关矩阵。" #: src/language/commands/factor.c:1935 msgid "Analysis N" msgstr "分析 N" #: src/language/commands/factor.c:1963 msgid "KMO and Bartlett's Test" msgstr "KMO和巴特利特(Bartlett)检验" #: src/language/commands/factor.c:1967 msgid "Kaiser-Meyer-Olkin Measure of Sampling Adequacy" msgstr "Kaiser-Meyer-Olkin样本充分度检验" #: src/language/commands/factor.c:1969 msgid "Bartlett's Test of Sphericity" msgstr "巴特莱特(Bartlett)球性检验" #: src/language/commands/factor.c:1970 msgid "Approx. Chi-Square" msgstr "卡方估计值" #: src/language/commands/factor.c:2018 #, c-format msgid "The %s criteria result in zero factors extracted. Therefore no analysis will be performed." msgstr "按%s标准可提取因子数为零。将不继续分析。" #: src/language/commands/factor.c:2025 #, c-format msgid "The %s criteria result in more factors than variables, which is not meaningful. No analysis will be performed." msgstr "按%s标准提取的因子数多于变量数，导致无意义的结果。不再往下进行分析操作。" #: src/language/commands/factor.c:2117 msgid "Component Matrix" msgstr "成分矩阵" #: src/language/commands/factor.c:2117 msgid "Factor Matrix" msgstr "因子矩阵" #: src/language/commands/factor.c:2122 msgid "Pattern Matrix" msgstr "模式矩阵" #: src/language/commands/factor.c:2131 msgid "Structure Matrix" msgstr "结构矩阵" #: src/language/commands/factor.c:2133 msgid "Rotated Component Matrix" msgstr "旋转成分矩阵" #: src/language/commands/factor.c:2134 msgid "Rotated Factor Matrix" msgstr "旋转因子矩阵" #: src/language/commands/file-handle.c:63 #, c-format msgid "File handle %s is already defined. Use %s before redefining a file handle." msgstr "文件句柄%s已经定义。定义句柄前须使用%s。" #: src/language/commands/file-handle.c:249 #, c-format msgid "%s must be specified with %s." msgstr "%s必须与%s一起使用。" #: src/language/commands/file-handle.c:261 #, c-format msgid "The specified file mode requires LRECL. Assuming %zu-character records." msgstr "指定的文件模式要求LRECL，默认为%zu字符记录。" #: src/language/commands/file-handle.c:293 #, fuzzy, c-format #| msgid "No multiple response set named %s." msgid "No file handle named %s." msgstr "没有找到名称为%s的多重响应集。" #: src/language/commands/file-handle.c:311 msgid "file" msgstr "文件" #: src/language/commands/file-handle.c:313 msgid "inline file" msgstr "内联文件" #: src/language/commands/file-handle.c:362 #, fuzzy #| msgid "expecting a file name or handle name" msgid "Syntax error expecting a file name or handle name." msgstr "要求一个文件名或句柄名" #: src/language/commands/file-handle.c:378 #, c-format msgid "Handle for %s not allowed here." msgstr "该处不允许使用%s的句柄。" #: src/language/commands/flip.c:101 #, c-format msgid "%s ignores %s. Temporary transformations will be made permanent." msgstr "%s忽略%s。 临时变换将被保存。" #: src/language/commands/flip.c:155 #, c-format msgid "Could not create temporary file for %s." msgstr "无法为%s创建临时文件。" #: src/language/commands/flip.c:343 #, c-format msgid "Error rewinding %s file: %s." msgstr "无法撤消对文件%s的操作：%s。" #: src/language/commands/flip.c:350 #, c-format msgid "Error creating %s source file." msgstr "创建源文件%s时出错。" #: src/language/commands/flip.c:363 #, c-format msgid "Error reading %s file: %s." msgstr "读取文件%s时出错：%s。" #: src/language/commands/flip.c:365 #, c-format msgid "Unexpected end of file reading %s file." msgstr "记取文件%s时文件意外结束。" #: src/language/commands/flip.c:381 #, c-format msgid "Error seeking %s source file: %s." msgstr "源文件%s查找时出错：%s。" #: src/language/commands/flip.c:389 #, c-format msgid "Error writing %s source file: %s." msgstr "写入源文件%s时出错：%s。" #: src/language/commands/flip.c:404 #, c-format msgid "Error rewinding %s source file: %s." msgstr "撤消源文件%s操作时出错：%s。" #: src/language/commands/flip.c:436 #, c-format msgid "Error reading %s temporary file: %s." msgstr "读取临时文件%s时出错：%s。" #: src/language/commands/flip.c:439 #, c-format msgid "Unexpected end of file reading %s temporary file." msgstr "读取临时文件%s时文件意外结束。" #: src/language/commands/frequencies.c:279 #: src/language/commands/logistic.c:1292 #: src/output/charts/plot-hist-cairo.c:122 msgid "Frequency" msgstr "频率" #: src/language/commands/frequencies.c:281 msgid "Valid Percent" msgstr "有效百分比" #: src/language/commands/frequencies.c:282 src/language/commands/graph.c:207 msgid "Cumulative Percent" msgstr "累积百分比" #: src/language/commands/frequencies.c:1207 #, c-format msgid "Omitting pie chart for %s, which has only %d unique values." msgstr "饼状图将忽略%s，原因为其仅具有%d个唯一值。" #: src/language/commands/frequencies.c:1210 #, c-format msgid "Omitting pie chart for %s, which has over 50 unique values." msgstr "饼状图将忽略%s，原因为其具有超过50个唯一值。" #: src/language/commands/frequencies.c:1226 #, fuzzy #| msgid "Omitting pie chart for %s, which has only %d unique values." msgid "Omitting bar chart, which has no values." msgstr "饼状图将忽略%s，原因为其仅具有%d个唯一值。" #: src/language/commands/friedman.c:220 #: src/language/commands/kruskal-wallis.c:263 #: src/language/commands/mann-whitney.c:182 #: src/language/commands/wilcoxon.c:229 msgid "Ranks" msgstr "次序" #: src/language/commands/friedman.c:222 src/language/commands/friedman.c:223 #: src/language/commands/kruskal-wallis.c:267 #: src/language/commands/mann-whitney.c:186 #: src/language/commands/wilcoxon.c:234 msgid "Mean Rank" msgstr "均值次序" #: src/language/commands/friedman.c:253 msgid "Kendall's W" msgstr "Kendall氏W" #: src/language/commands/friedman.c:256 #: src/language/commands/kruskal-wallis.c:314 #: src/language/commands/median.c:353 msgid "Chi-Square" msgstr "卡方" #: src/language/commands/get-data.c:95 src/output/measure.c:254 #, c-format msgid "error reading file `%s'" msgstr "读取文件`%s'出错。" #: src/language/commands/get-data.c:293 #, fuzzy #| msgid "%s and %s are mutually exclusive" msgid "FIXED and DELIMITED arrangements are mutually exclusive." msgstr "%s与%s互斥" #: src/language/commands/get-data.c:295 src/language/commands/get-data.c:298 #, c-format msgid "This syntax requires %s arrangement." msgstr "" #: src/language/commands/get-data.c:430 msgid "Ignoring obsolete IMPORTCASES subcommand. (N OF CASES or SAMPLE may be used to substitute.)" msgstr "子命令 IMPORTCASES已停用，将被忽略。 （可用 N OF CASES 或 SAMPLE 替代。）" #: src/language/commands/get-data.c:479 msgid "In compatible syntax mode, the QUALIFIER string must contain exactly one character." msgstr "兼容语法模式下，QUALIFIER字串必须包含仅一个字符。" #: src/language/commands/get.c:132 #, c-format msgid "%s: Data file dictionary has no variables." msgstr "%s: 数据文件字典没有变量。" #: src/language/commands/glm.c:164 #, fuzzy #| msgid "Multivariate analysis is not yet implemented" msgid "Multivariate analysis is not yet implemented." msgstr "不包含多元分析" #: src/language/commands/glm.c:650 msgid "Tests of Between-Subjects Effects" msgstr "组间效应检验" #: src/language/commands/glm.c:653 #, fuzzy #| msgid "Type %s Sum of Squares" msgid "Type I Sum Of Squares" msgstr "类型%s的平方和" #: src/language/commands/glm.c:654 #, fuzzy #| msgid "Type %s Sum of Squares" msgid "Type II Sum Of Squares" msgstr "类型%s的平方和" #: src/language/commands/glm.c:655 #, fuzzy #| msgid "Type %s Sum of Squares" msgid "Type III Sum Of Squares" msgstr "类型%s的平方和" #: src/language/commands/glm.c:657 src/language/commands/oneway.c:905 #: src/language/commands/regression.c:928 msgid "Mean Square" msgstr "均方" #: src/language/commands/glm.c:658 src/language/commands/oneway.c:906 #: src/language/commands/regression.c:929 #: src/language/commands/t-test-indep.c:262 msgid "F" msgstr "F" #: src/language/commands/glm.c:663 msgid "Corrected Model" msgstr "校正后模型" #: src/language/commands/glm.c:663 msgid "Model" msgstr "模型" #: src/language/commands/glm.c:675 msgid "Intercept" msgstr "截距" #: src/language/commands/glm.c:726 #, fuzzy #| msgid "Error" msgctxt "statistics" msgid "Error" msgstr "错误" #: src/language/commands/glm.c:743 msgid "Corrected Total" msgstr "校正后总变异" #: src/language/commands/graph.c:205 msgid "Percentage" msgstr "百分比" #: src/language/commands/graph.c:206 msgid "Cumulative Count" msgstr "累积数量" #: src/language/commands/graph.c:290 #, c-format msgid "%s vs. %s by %s" msgstr "%s 对 %s by %s" #: src/language/commands/graph.c:294 #, c-format msgid "%s vs. %s" msgstr "%s 对 %s" #: src/language/commands/graph.c:311 msgid "Maximum number of scatterplot categories reached. Your BY variable has too many distinct values. The coloring of the plot will not be correct." msgstr "散点图类别数达到系统最大值。BY变量含有过多的独特值。图像的颜色显示可能不正确。" #: src/language/commands/graph.c:507 src/language/commands/rank.c:614 #, c-format msgid "%s of %s" msgstr "%s源于%s" #: src/language/commands/graph.c:651 src/language/commands/graph.c:682 #: src/language/commands/graph.c:736 msgid "Only one chart type is allowed." msgstr "只能选择一种图表类型。" #: src/language/commands/graph.c:673 src/language/commands/graph.c:785 #: src/language/commands/graph.c:801 msgid "Only one variable is allowed." msgstr "只允许一个变量。" #: src/language/commands/host.c:72 #, c-format msgid "%s: Command exited with status %d." msgstr "" #: src/language/commands/host.c:94 #, fuzzy, c-format #| msgid "failed to create temporary file" msgid "Failed to create temporary file (%s)." msgstr "无法创建临时文件" #: src/language/commands/host.c:101 #, c-format msgid "/dev/null: Failed to open (%s)." msgstr "" #: src/language/commands/host.c:116 #, c-format msgid "Couldn't fork: %s." msgstr "无法分支：%s。" #: src/language/commands/host.c:126 msgid "Failed to set process group." msgstr "" #: src/language/commands/host.c:144 msgid "Failed to set timeout." msgstr "" #: src/language/commands/host.c:211 #, c-format msgid "While running \"%s\", waiting for child process failed (%s)." msgstr "" #: src/language/commands/host.c:221 #, c-format msgid "Command \"%s\" timed out." msgstr "" #: src/language/commands/host.c:223 #, c-format msgid "Command \"%s\" terminated by signal %d." msgstr "" #: src/language/commands/host.c:230 msgid "Command or shell not found" msgstr "" #: src/language/commands/host.c:232 msgid "Could not invoke command or shell" msgstr "" #: src/language/commands/host.c:235 #, c-format msgid "Command \"%s\" exited with status %d (%s)." msgstr "" #: src/language/commands/host.c:238 #, c-format msgid "Command \"%s\" exited with status %d." msgstr "" #: src/language/commands/host.c:248 #, c-format msgid "Command \"%s\" output could not be read (%s)." msgstr "" #: src/language/commands/host.c:331 #, fuzzy #| msgid "Command shell not supported on this platform." msgid "Time limit not supported on this platform." msgstr "运行平台不支持命令shell。" #: src/language/commands/include.c:62 #, c-format msgid "Can't find `%s' in include file search path." msgstr "在包含文件路径中找不到`%s'。" #: src/language/commands/inpt-pgm.c:127 #, c-format msgid "Unexpected end-of-file within %s." msgstr "文件意外结束于%s之内。" #: src/language/commands/inpt-pgm.c:146 #, fuzzy, c-format #| msgid "Input program must contain %s or %s." msgid "Input program does not contain %s or %s." msgstr "输入程序必须包含%s或%s。" #: src/language/commands/inpt-pgm.c:154 msgid "Input program did not create any variables." msgstr "输入程序没有生成任何变量。" #: src/language/commands/inpt-pgm.c:372 msgid "REREAD: Column numbers must be positive finite numbers. Column set to 1." msgstr "REREAD：列编号必须为正数。已设为1。" #: src/language/commands/jonckheere-terpstra.c:356 msgid "Jonckheere-Terpstra Test" msgstr "Jonckheere-Terpstra检验" #: src/language/commands/jonckheere-terpstra.c:363 #, c-format msgid "Number of levels in %s" msgstr "%s的水平数量" #: src/language/commands/jonckheere-terpstra.c:369 msgid "Observed J-T Statistic" msgstr "实测J-T统计量" #: src/language/commands/jonckheere-terpstra.c:370 msgid "Mean J-T Statistic" msgstr "J-T统计量均值" #: src/language/commands/jonckheere-terpstra.c:371 msgid "Std. Deviation of J-T Statistic" msgstr "J-T统计量标准差" #: src/language/commands/jonckheere-terpstra.c:372 msgid "Std. J-T Statistic" msgstr "标准J-T统计量" #: src/language/commands/jonckheere-terpstra.c:373 #: src/language/commands/ks-one-sample.c:313 #: src/language/commands/mann-whitney.c:251 src/language/commands/runs.c:328 #: src/language/commands/wilcoxon.c:273 msgid "Asymp. Sig. (2-tailed)" msgstr "渐进显著度(双尾)" #: src/language/commands/ks-one-sample.c:274 src/ui/gui/ks-one-sample.ui:24 msgid "One-Sample Kolmogorov-Smirnov Test" msgstr "单样本Kolmogorov-Smirnov检验" #: src/language/commands/ks-one-sample.c:284 msgid "Uniform Parameters" msgstr "均匀分布参数" #: src/language/commands/ks-one-sample.c:289 msgid "Normal Parameters" msgstr "正态分布参数" #: src/language/commands/ks-one-sample.c:294 msgid "Poisson Parameters" msgstr "泊松分布参数" #: src/language/commands/ks-one-sample.c:300 msgid "Exponential Parameters" msgstr "指数分布参数" #: src/language/commands/ks-one-sample.c:308 msgid "Most Extreme Differences" msgstr "最大极值差异" #: src/language/commands/ks-one-sample.c:309 msgid "Absolute" msgstr "绝对" #: src/language/commands/ks-one-sample.c:309 src/language/commands/roc.c:932 msgid "Positive" msgstr "正" #: src/language/commands/ks-one-sample.c:309 src/language/commands/roc.c:932 msgid "Negative" msgstr "负" #: src/language/commands/ks-one-sample.c:312 msgid "Kolmogorov-Smirnov Z" msgstr "Kolmogorov-Smirnov Z" #: src/language/commands/logistic.c:327 msgid "All predicted values are either 1 or 0" msgstr "所有估计值均为1或0" #: src/language/commands/logistic.c:525 msgid "Dependent variable's values are not dichotomous." msgstr "因变量的值不是二分型。" #: src/language/commands/logistic.c:614 #, c-format msgid "Category %s does not have at least two distinct values. Logistic regression will not be run." msgstr "类别%s不包含至少两个明显区别的值。不进行逻辑斯蒂回归分析。" #: src/language/commands/logistic.c:674 #, c-format msgid "Estimation terminated at iteration number %d because parameter estimates changed by less than %g" msgstr "估计在迭代%d时终止，原因是参数估计的变化少于%g" #: src/language/commands/logistic.c:686 #, c-format msgid "Estimation terminated at iteration number %d because Log Likelihood decreased by less than %g%%" msgstr "估计在迭代%d时终止，原因是对数似然下降小于%g%%" #: src/language/commands/logistic.c:701 #, c-format msgid "Estimation terminated at iteration number %d because maximum iterations has been reached" msgstr "估计在迭代%d时终止，已达到最大迭代次数" #: src/language/commands/logistic.c:1050 msgid "Dependent Variable Encoding" msgstr "因变量编码" #: src/language/commands/logistic.c:1052 msgid "Mapping" msgstr "" #: src/language/commands/logistic.c:1053 msgid "Internal Value" msgstr "内部值" #: src/language/commands/logistic.c:1056 msgid "Original Value" msgstr "原始值" #: src/language/commands/logistic.c:1078 msgid "Variables in the Equation" msgstr "公式中的变量" #: src/language/commands/logistic.c:1082 src/language/commands/regression.c:804 msgid "B" msgstr "B" #: src/language/commands/logistic.c:1083 msgid "S.E." msgstr "S.E." #: src/language/commands/logistic.c:1084 msgid "Wald" msgstr "Wald" #: src/language/commands/logistic.c:1087 msgid "Exp(B)" msgstr "Exp(B)" #: src/language/commands/logistic.c:1092 #, c-format msgid "%d%% CI for Exp(B)" msgstr "Exp(B)的%d%%置信区间" #: src/language/commands/logistic.c:1100 src/language/commands/logistic.c:1381 msgid "Step 1" msgstr "步骤一" #: src/language/commands/logistic.c:1174 msgid "Constant" msgstr "常量" #: src/language/commands/logistic.c:1209 msgid "Model Summary" msgstr "模型总结" #: src/language/commands/logistic.c:1212 msgid "-2 Log likelihood" msgstr "-2x对数似然" #: src/language/commands/logistic.c:1213 msgid "Cox & Snell R Square" msgstr "Cox和Snell R平方" #: src/language/commands/logistic.c:1214 msgid "Nagelkerke R Square" msgstr "Nagelkerke R平方" #: src/language/commands/logistic.c:1217 src/language/commands/logistic.c:1381 #, fuzzy #| msgid "Step 1" msgid "Step" msgstr "步骤一" #: src/language/commands/logistic.c:1246 msgid "Unweighted Cases" msgstr "未加权个案" #: src/language/commands/logistic.c:1247 msgid "Included in Analysis" msgstr "包括在分析内" #: src/language/commands/logistic.c:1247 msgid "Missing Cases" msgstr "缺失个案" #: src/language/commands/logistic.c:1276 msgid "Categorical Variables' Codings" msgstr "类别变量编码" #: src/language/commands/logistic.c:1291 #, fuzzy #| msgid "Encodings" msgid "Codings" msgstr "编码" #: src/language/commands/logistic.c:1294 msgid "Parameter coding" msgstr "参数编码" #: src/language/commands/logistic.c:1302 src/language/commands/mrsets.c:593 #, fuzzy #| msgid "Category" msgid "Categories" msgstr "类别" #: src/language/commands/logistic.c:1373 msgid "Classification Table" msgstr "分类表" #: src/language/commands/logistic.c:1377 msgid "Predicted" msgstr "预测值" #: src/language/commands/logistic.c:1377 #, fuzzy #| msgid "" #| "Percentage\n" #| "Correct" msgid "Percentage Correct" msgstr "" "百分比\n" "正确" #: src/language/commands/logistic.c:1379 msgid "Observed" msgstr "观测值" #: src/language/commands/logistic.c:1379 msgid "Overall Percentage" msgstr "总百分比" #: src/language/commands/loop.c:128 #, fuzzy #| msgid "This command cannot appear outside %s...%s." msgid "This command cannot appear outside LOOP...END LOOP." msgstr "该指令不能处于%s...%s之外。" #: src/language/commands/loop.c:183 msgid "Only one index clause may be specified." msgstr "仅可指定一个索引语句。" #: src/language/commands/mann-whitney.c:187 #: src/language/commands/wilcoxon.c:235 msgid "Sum of Ranks" msgstr "秩之和" #: src/language/commands/mann-whitney.c:248 msgid "Mann-Whitney U" msgstr "Mann-Whitney U" #: src/language/commands/mann-whitney.c:249 msgid "Wilcoxon W" msgstr "Wilcoxon W" #: src/language/commands/mann-whitney.c:250 src/language/commands/runs.c:327 #: src/language/commands/wilcoxon.c:272 msgid "Z" msgstr "Z" #: src/language/commands/matrix-data.c:372 #, fuzzy, c-format #| msgid "Unknown format type `%s'." msgid "Unknown row type \"%.*s\"." msgstr "未知的格式类型`%s'。" #: src/language/commands/matrix-data.c:612 msgid "Extraneous data expecting end of line." msgstr "" #: src/language/commands/matrix-data.c:644 msgid "N record is not allowed with N subcommand. Ignoring N record." msgstr "" #: src/language/commands/matrix-data.c:666 #, c-format msgid "Data contains pooled row type %s not included in CONTENTS." msgstr "" #: src/language/commands/matrix-data.c:672 #, c-format msgid "Data contains with-factors row type %s not included in CONTENTS." msgstr "" #: src/language/commands/matrix-data.c:722 #, c-format msgid "Matrix %s had %zu rows but %zu rows were expected." msgstr "" #: src/language/commands/matrix-data.c:887 msgid "VARIABLES may not include VARNAME_." msgstr "" #: src/language/commands/matrix-data.c:912 msgid "ROWTYPE_ is not allowed on SPLIT or FACTORS." msgstr "" #: src/language/commands/matrix-data.c:921 #, c-format msgid "%s may not appear on both SPLIT and FACTORS." msgstr "" #: src/language/commands/matrix-data.c:1039 #, fuzzy #| msgid "FORMAT = FULL and FORMAT = NODIAGONAL are mutually exclusive." msgid "FORMAT=FULL and FORMAT=NODIAGONAL are mutually exclusive." msgstr "设置FORMAT = FULL 与 FORMAT = NODIAGONAL互斥。" #: src/language/commands/matrix-data.c:1085 msgid "CELLS is ignored when VARIABLES includes ROWTYPE_" msgstr "" #: src/language/commands/matrix-data.c:1157 msgid "CELLS is required when factor variables are specified and VARIABLES does not include ROWTYPE_." msgstr "" #: src/language/commands/matrix-data.c:1166 msgid "CONTENTS was not specified and VARIABLES does not include ROWTYPE_. Assuming CONTENTS=CORR." msgstr "" #: src/language/commands/matrix-data.c:1186 #, fuzzy #| msgid "At least one variable must be specified." msgid "At least one continuous variable is required." msgstr "至少指定一个变量。" #: src/language/commands/matrix-data.c:1195 msgid "VARIABLES includes ROWTYPE_ but the continuous variables are not the last ones on VARIABLES." msgstr "" #: src/language/commands/matrix-data.c:1204 msgid "Cannot specify N on CONTENTS along with the N subcommand." msgstr "" #: src/language/commands/matrix-reader.c:104 #, c-format msgid "Matrix dataset lacks a variable called %s." msgstr "矩阵数据缺少变量%s。" #: src/language/commands/matrix-reader.c:109 #, c-format msgid "Matrix dataset variable %s should be of string type." msgstr "矩阵数据变量%s应为字符串类型。" #: src/language/commands/matrix-reader.c:128 #, fuzzy, c-format #| msgid "Weighting variable %s not present in dictionary." msgid "Variable %s must precede %s in matrix file dictionary." msgstr "字典中权重变量%s不存在。" #: src/language/commands/matrix-reader.c:138 #, fuzzy, c-format #| msgid "Matrix dataset variable %s should be of string type." msgid "Matrix dataset variable %s should be numeric." msgstr "矩阵数据变量%s应为字符串类型。" #: src/language/commands/matrix-reader.c:157 #, fuzzy #| msgid "The active dataset does not have a file label." msgid "Matrix dataset does not have any continuous variables." msgstr "活动数据集没有包含文件标签。" #: src/language/commands/matrix-reader.c:339 #, c-format msgid "%s matrix has %zu columns but %zu rows named variables to be analyzed (and %zu rows named unknown variables)." msgstr "" #: src/language/commands/matrix.c:994 #, c-format msgid "Matrix function %s requires %zu argument." msgid_plural "Matrix function %s requires %zu arguments." msgstr[0] "" #: src/language/commands/matrix.c:1000 #, c-format msgid "Matrix function %s requires 1 or 2 arguments, but %zu was provided." msgid_plural "Matrix function %s requires 1 or 2 arguments, but %zu were provided." msgstr[0] "" #: src/language/commands/matrix.c:1008 #, fuzzy, c-format #| msgid "%s requires at least %d valid arguments in list." msgid "Matrix function %s requires at least one argument." msgstr "%s要求至少%d个有效参数。" #: src/language/commands/matrix.c:1076 src/language/commands/matrix.c:8739 #, fuzzy, c-format #| msgid "Unknown system variable %s." msgid "Unknown variable %s." msgstr "未知系统变量%s。" #: src/language/commands/matrix.c:1093 #, fuzzy #| msgid "Syntax error in date field." msgid "Syntax error expecting matrix expression." msgstr "日期字段语法错误。" #: src/language/commands/matrix.c:1448 msgid "Input to CHOL function is not positive-definite." msgstr "" #: src/language/commands/matrix.c:1563 #, c-format msgid "Column %zu in DESIGN argument has constant value." msgstr "" #: src/language/commands/matrix.c:1637 msgid "Argument of EVAL must be symmetric." msgstr "" #: src/language/commands/matrix.c:1803 #, c-format msgid "GSCH requires its argument to have at least as many columns as rows, but it has dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:1840 #, c-format msgid "%zu×%zu argument to GSCH contains only %zu linearly independent columns." msgstr "" #: src/language/commands/matrix.c:2162 msgid "Arguments 2 and 3 to RESHAPE must be integers." msgstr "" #: src/language/commands/matrix.c:2171 #, c-format msgid "Product of RESHAPE size arguments (%zu×%zu = %zu) differs from product of matrix dimensions (%zu×%zu = %zu)." msgstr "" #: src/language/commands/matrix.c:2329 msgid "SOLVE arguments must have the same number of rows." msgstr "" #: src/language/commands/matrix.c:2331 #, c-format msgid "Argument 1 has dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:2333 #, c-format msgid "Argument 2 has dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:2402 msgid "Scalar argument to SWEEP must be integer." msgstr "" #: src/language/commands/matrix.c:2409 msgid "Scalar argument to SWEEP must be integer less than or equal to the smaller of the matrix argument's rows and columns." msgstr "" #: src/language/commands/matrix.c:2491 msgid "Product of arguments to UNIFORM exceeds memory size." msgstr "" #: src/language/commands/matrix.c:3307 #, c-format msgid "The operands of %s must have the same dimensions or one must be a scalar." msgstr "" #: src/language/commands/matrix.c:3311 src/language/commands/matrix.c:3332 #, c-format msgid "The left-hand operand is a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3314 src/language/commands/matrix.c:3335 #, c-format msgid "The right-hand operand is a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3330 msgid "Matrices not conformable for multiplication." msgstr "" #: src/language/commands/matrix.c:3376 #, c-format msgid "Matrix exponentation with ** requires a square matrix on the left-hand size, not one with dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:3384 #, c-format msgid "Matrix exponentiation with ** requires a scalar on the right-hand side, not a matrix with dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:3393 #, c-format msgid "Exponent %.1f in matrix exponentiation is non-integer or outside the valid range." msgstr "" #: src/language/commands/matrix.c:3440 #, c-format msgid "This operand is a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3463 #, c-format msgid "This operand with value %g is outside the supported integer range from %ld to %ld." msgstr "" #: src/language/commands/matrix.c:3479 msgid "All operands of : must be scalars in the supported integer range." msgstr "" #: src/language/commands/matrix.c:3496 msgid "The increment operand to : must be nonzero." msgstr "" #: src/language/commands/matrix.c:3507 msgid "Matrix cannot be allocated. Too large?" msgstr "" #: src/language/commands/matrix.c:3536 msgid "This expression tries to horizontally join matrices with differing numbers of rows." msgstr "" #: src/language/commands/matrix.c:3566 msgid "This expression tries to vertically join matrices with differing numbers of columns." msgstr "" #: src/language/commands/matrix.c:3631 #, c-format msgid "Vector index must be scalar or vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3638 #, c-format msgid "Matrix row index must be scalar or vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3645 #, c-format msgid "Matrix column index must be scalar or vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3667 #, c-format msgid "Index %g is out of range for vector with %zu elements." msgstr "" #: src/language/commands/matrix.c:3673 #, c-format msgid "%g is not a valid row index for a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3680 #, c-format msgid "%g is not a valid column index for a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3712 #, c-format msgid "Vector index operator may not be applied to a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3795 #, c-format msgid "Function %s argument %zu must be a scalar, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3810 #, c-format msgid "Function %s argument %zu must be a vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:3861 #, fuzzy, c-format #| msgid "The sheet index must be greater than or equal to 1" msgid "Argument %zu to matrix function %s must be greater than or equal to argument %zu." msgstr "工作表索引必须大于等于1" #: src/language/commands/matrix.c:3867 #, c-format msgid "Argument %zu to matrix function %s must be greater than argument %zu." msgstr "" #: src/language/commands/matrix.c:3873 #, c-format msgid "Argument %zu to matrix function %s must be less than or equal to argument %zu." msgstr "" #: src/language/commands/matrix.c:3879 #, c-format msgid "Argument %zu to matrix function %s must be less than argument %zu." msgstr "" #: src/language/commands/matrix.c:3885 #, c-format msgid "Argument %zu to matrix function %s must not be equal to argument %zu." msgstr "" #: src/language/commands/matrix.c:3893 src/language/commands/matrix.c:3900 #: src/language/commands/matrix.c:3948 #, fuzzy, c-format #| msgid "Missing argument %zu to %s." msgid "Argument %zu is %g." msgstr "没有参数%zu被传递到%s。" #: src/language/commands/matrix.c:3896 src/language/commands/matrix.c:3952 #, c-format msgid "Row %zu, column %zu of argument %zu is %g." msgstr "" #: src/language/commands/matrix.c:3914 #, fuzzy, c-format #| msgid "The sheet index must be greater than or equal to 1" msgid "Argument %zu to matrix function %s must be greater than or equal to %g." msgstr "工作表索引必须大于等于1" #: src/language/commands/matrix.c:3920 #, c-format msgid "Argument %zu to matrix function %s must be greater than %g." msgstr "" #: src/language/commands/matrix.c:3926 #, c-format msgid "Argument %zu to matrix function %s must be less than or equal to %g." msgstr "" #: src/language/commands/matrix.c:3932 #, c-format msgid "Argument %zu to matrix function %s must be less than %g." msgstr "" #: src/language/commands/matrix.c:3938 #, c-format msgid "Argument %zu to matrix function %s must not be equal to %g." msgstr "" #: src/language/commands/matrix.c:4021 #, c-format msgid "Row %zu, column %zu of argument %zu to matrix function %s is %g, which is outside the valid range %c%d,%d%c." msgstr "" #: src/language/commands/matrix.c:4030 #, c-format msgid "Argument %zu to matrix function %s is %g, which is outside the valid range %c%d,%d%c." msgstr "" #: src/language/commands/matrix.c:4047 #, c-format msgid "Argument %zu to matrix function %s, which must be integer, contains non-integer value %g in row %zu, column %zu." msgstr "" #: src/language/commands/matrix.c:4053 #, c-format msgid "Argument %zu to matrix function %s, which must be integer, has non-integer value %g." msgstr "" #: src/language/commands/matrix.c:4402 #, c-format msgid "Arguments 1 and 2 to %s have dimensions %zu×%zu and %zu×%zu, but %s requires these arguments either to have the same dimensions or for one of them to be a scalar." msgstr "" #: src/language/commands/matrix.c:4528 #, fuzzy, c-format #| msgid "Invalid variable name `%s' in position %d." msgid "Uninitialized variable %s used in expression." msgstr "变量名称`%s' 在位置%d处有错误。" #: src/language/commands/matrix.c:4686 #, c-format msgid "Expression for %s must evaluate to scalar, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:4710 #, c-format msgid "Expression for %s is outside the supported integer range." msgstr "" #: src/language/commands/matrix.c:4782 src/language/commands/matrix.c:4864 #, fuzzy, c-format #| msgid "Unknown system variable %s." msgid "Undefined variable %s." msgstr "未知系统变量%s。" #: src/language/commands/matrix.c:4869 #, c-format msgid "Cannot index %zu×%zu matrix %s." msgstr "" #: src/language/commands/matrix.c:4878 #, c-format msgid "Can't use vector indexing on %zu×%zu matrix %s." msgstr "" #: src/language/commands/matrix.c:4912 src/language/commands/matrix.c:4924 #, c-format msgid "Only an %zu-element vector may be assigned to this %zu-element subvector of %s." msgstr "" #: src/language/commands/matrix.c:4916 #, c-format msgid "The source is an %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:4927 #, c-format msgid "The source vector has %zu element." msgid_plural "The source vector has %zu elements." msgstr[0] "" #: src/language/commands/matrix.c:4956 #, c-format msgid "Numbers of indexes for assigning to %s differ from the size of the source matrix." msgstr "" #: src/language/commands/matrix.c:4961 #, fuzzy, c-format #| msgid "Number of variables specified (%zu) differs from number of variable formats (%zu)." msgid "Number of row indexes for assigning to %s differs from number of rows in source matrix." msgstr "变量数量(%zu)与变量格式数目(%zu)不同。" #: src/language/commands/matrix.c:4966 #, c-format msgid "Number of column indexes for assigning to %s differs from number of columns in source matrix." msgstr "" #: src/language/commands/matrix.c:4974 #, c-format msgid "There is %zu row index." msgid_plural "There are %zu row indexes." msgstr[0] "" #: src/language/commands/matrix.c:4980 #, c-format msgid "Destination matrix %s has %zu row." msgid_plural "Destination matrix %s has %zu rows." msgstr[0] "" #: src/language/commands/matrix.c:4990 #, c-format msgid "There is %zu column index." msgid_plural "There are %zu column indexes." msgstr[0] "" #: src/language/commands/matrix.c:4996 #, c-format msgid "Destination matrix %s has %zu column." msgid_plural "Destination matrix %s has %zu columns." msgstr[0] "" #: src/language/commands/matrix.c:5002 #, c-format msgid "The source matrix is %zu×%zu." msgstr "" #: src/language/commands/matrix.c:5979 msgid "BREAK not inside LOOP." msgstr "" #: src/language/commands/matrix.c:6023 #, fuzzy #| msgid "Cl_ear Variables" msgid "Matrix Variables" msgstr "清除变量(_e)" #: src/language/commands/matrix.c:6025 src/language/commands/matrix.c:8526 #: src/language/commands/set.c:1291 src/language/commands/sys-file-info.c:186 msgid "Attribute" msgstr "特征" #: src/language/commands/matrix.c:6026 msgid "Dimension" msgstr "" #: src/language/commands/matrix.c:6028 msgid "Size (kB)" msgstr "" #: src/language/commands/matrix.c:6154 #, c-format msgid "Cannot save %zu×%zu matrix to %s because the first SAVE to %s in this matrix program wrote a %zu-column matrix." msgstr "" #: src/language/commands/matrix.c:6159 #, c-format msgid "This is the location of the first SAVE to %s." msgstr "" #: src/language/commands/matrix.c:6218 #, fuzzy, c-format #| msgid "Duplicate variable name %s." msgid "Duplicate variable name %s in SAVE statement." msgstr "变量名称%s重复。" #: src/language/commands/matrix.c:6231 #, c-format msgid "The SAVE command STRINGS subcommand specifies an unknown variable %s." msgstr "" #: src/language/commands/matrix.c:6235 #, c-format msgid "The SAVE command STRINGS subcommand specifies %zu unknown variable: %s." msgid_plural "The SAVE command STRINGS subcommand specifies %zu unknown variables, including %s." msgstr[0] "" #: src/language/commands/matrix.c:6394 msgid "Ignoring NAMES because VARIABLES was also specified." msgstr "" #: src/language/commands/matrix.c:6567 src/language/commands/matrix.c:7149 #, c-format msgid "Field width %d does not evenly divide record width %d." msgstr "" #: src/language/commands/matrix.c:6570 src/language/commands/matrix.c:6703 #: src/language/commands/matrix.c:7152 src/language/commands/matrix.c:7268 msgid "This syntax designates the record width." msgstr "" #: src/language/commands/matrix.c:6572 src/language/commands/matrix.c:7154 msgid "This syntax specifies the field width." msgstr "" #: src/language/commands/matrix.c:6624 src/language/commands/matrix.c:7197 #, fuzzy, c-format #| msgid "Unknown format type `%s'." msgid "Unknown format %s." msgstr "未知的格式类型`%s'。" #: src/language/commands/matrix.c:6656 msgid "SIZE is required for reading data into a full matrix (as opposed to a submatrix)." msgstr "" #: src/language/commands/matrix.c:6659 msgid "This expression designates a full matrix." msgstr "" #: src/language/commands/matrix.c:6698 #, c-format msgid "%d repetitions cannot fit in record width %d." msgstr "" #: src/language/commands/matrix.c:6701 src/language/commands/matrix.c:7266 msgid "This syntax designates the number of repetitions." msgstr "" #: src/language/commands/matrix.c:6711 src/language/commands/matrix.c:7276 msgid "This command specifies two different field widths." msgstr "" #: src/language/commands/matrix.c:6715 src/language/commands/matrix.c:7280 #: src/language/commands/matrix.c:7317 #, c-format msgid "This syntax specifies %d repetition." msgid_plural "This syntax specifies %d repetitions." msgstr[0] "" #: src/language/commands/matrix.c:6720 src/language/commands/matrix.c:7285 #: src/language/commands/matrix.c:7322 #, c-format msgid "This syntax designates record width %d, which divided by %d repetitions implies field width %d." msgstr "" #: src/language/commands/matrix.c:6727 src/language/commands/matrix.c:6730 #: src/language/commands/matrix.c:7292 src/language/commands/matrix.c:7295 #: src/language/commands/matrix.c:7330 #, fuzzy, c-format #| msgid "%s must be specified with %s." msgid "This syntax specifies field width %d." msgstr "%s必须与%s一起使用。" #: src/language/commands/matrix.c:6754 #, c-format msgid "Error reading \"%.*s\" as format %s for matrix row %zu, column %zu: %s" msgstr "" #: src/language/commands/matrix.c:6776 msgid "Matrix data may not contain missing value." msgstr "" #: src/language/commands/matrix.c:6811 #, fuzzy #| msgid "Unexpected end of file reading %s file." msgid "Unexpected end of file reading matrix data." msgstr "记取文件%s时文件意外结束。" #: src/language/commands/matrix.c:6882 #, fuzzy, c-format #| msgid "Trailing garbage `%.*s' following date." msgid "Trailing garbage following data for matrix row %zu." msgstr "日期之后带有无效信息`%.*s'。" #: src/language/commands/matrix.c:6908 src/language/commands/matrix.c:6931 #, c-format msgid "SIZE must evaluate to a scalar or a 2-element vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:6944 #, c-format msgid "Matrix dimensions %g×%g specified on SIZE are outside valid range." msgstr "" #: src/language/commands/matrix.c:6980 msgid "Dimensions specified on SIZE differ from dimensions of destination submatrix." msgstr "" #: src/language/commands/matrix.c:6983 #, c-format msgid "SIZE specifies dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:6986 #, c-format msgid "Destination submatrix has dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:7007 #, c-format msgid "Cannot read non-square %zu×%zu matrix using READ with MODE=SYMMETRIC." msgstr "" #: src/language/commands/matrix.c:7311 #, fuzzy, c-format #| msgid "%s must be specified before %s." msgid "This syntax specifies format %s." msgstr "%s必须先于%s之前设定。" #: src/language/commands/matrix.c:7341 #, c-format msgid "Format %s is too wide for %zu-byte matrix elements." msgstr "" #: src/language/commands/matrix.c:7364 #, c-format msgid "WRITE with MODE=TRIANGULAR requires a square matrix but the matrix to be written has dimensions %zu×%zu." msgstr "" #: src/language/commands/matrix.c:7528 msgid "Syntax error expecting ACCEPT or OMIT or a number for MISSING." msgstr "" #: src/language/commands/matrix.c:7546 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting OMIT or a number for SYSMIS." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/commands/matrix.c:7592 #, fuzzy, c-format #| msgid "Variable %s is not dichotomous" msgid "Variable %s is not numeric." msgstr "变量%s不是二分变量" #: src/language/commands/matrix.c:7647 #, fuzzy, c-format #| msgid "Too-large number set to system-missing." msgid "Variable %s in case %lld is system-missing." msgstr "系统缺失数字值设置过大。" #: src/language/commands/matrix.c:7662 #, fuzzy, c-format #| msgid "Target variable %s duplicates existing variable %s." msgid "Variable %s in case %lld has user-missing value %g." msgstr "目标变量%s与现存变量%s冲突。" #: src/language/commands/matrix.c:7702 #, c-format msgid "The %s command cannot read an empty active file." msgstr "" #: src/language/commands/matrix.c:7752 #, c-format msgid "%s may only be specified on MSAVE if it was specified on the first MSAVE within MATRIX." msgstr "" #: src/language/commands/matrix.c:7755 #, c-format msgid "The first MSAVE in MATRIX did not specify %s." msgstr "" #: src/language/commands/matrix.c:7758 #, c-format msgid "This is the specification of %s on a later MSAVE." msgstr "" #: src/language/commands/matrix.c:7765 #, c-format msgid "%s must specify the same variables on each MSAVE within a given MATRIX." msgstr "" #: src/language/commands/matrix.c:7768 #, c-format msgid "This is the specification of %s on the first MSAVE." msgstr "" #: src/language/commands/matrix.c:7771 #, c-format msgid "This is a different specification of %s on a later MSAVE." msgstr "" #: src/language/commands/matrix.c:7785 msgid "OUTFILE must name the same file on each MSAVE within a single MATRIX command." msgstr "" #: src/language/commands/matrix.c:7788 msgid "This is the OUTFILE on the first MSAVE command." msgstr "" #: src/language/commands/matrix.c:7790 msgid "This is the OUTFILE on a later MSAVE command." msgstr "" #: src/language/commands/matrix.c:7880 #, fuzzy, c-format #| msgid "Dummy variable name `%s' is given twice." msgid "Variable name %s is reserved." msgstr "虚拟变量名`%s'重复指定。" #: src/language/commands/matrix.c:7989 msgid "FNAMES requires FACTOR." msgstr "" #: src/language/commands/matrix.c:7994 msgid "SNAMES requires SPLIT." msgstr "" #: src/language/commands/matrix.c:8056 #, c-format msgid "%s expression must evaluate to vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:8094 #, fuzzy, c-format #| msgid "Duplicate long variable name `%s'." msgid "Duplicate or invalid FACTOR variable name %s." msgstr "长变量名`%s'重复。" #: src/language/commands/matrix.c:8105 #, fuzzy, c-format #| msgid "Duplicate long variable name `%s'." msgid "Duplicate or invalid variable name %s." msgstr "长变量名`%s'重复。" #: src/language/commands/matrix.c:8137 #, fuzzy, c-format #| msgid "Extension 11 has bad count %u (for %zu variables)." msgid "Matrix on MSAVE has %zu columns but there are %zu variables." msgstr "扩展11数量%u有误(共%zu个变量)。" #: src/language/commands/matrix.c:8155 #, c-format msgid "There are %zu factor variables, but %zu factor values were supplied." msgstr "" #: src/language/commands/matrix.c:8175 #, c-format msgid "There are %zu split variables, but %zu split values were supplied." msgstr "" #: src/language/commands/matrix.c:8311 #, fuzzy, c-format #| msgid "Matrix dataset lacks a variable called %s." msgid "Matrix data file lacks %s variable." msgstr "矩阵数据缺少变量%s。" #: src/language/commands/matrix.c:8316 #, c-format msgid "%s variable in matrix data file must be 8-byte string, but it has width %d." msgstr "" #: src/language/commands/matrix.c:8393 #, c-format msgid "Matrix data file contains unknown ROWTYPE_ \"%.*s\"." msgstr "" #: src/language/commands/matrix.c:8410 #, fuzzy, c-format #| msgid "Matrix dataset lacks a variable called %s." msgid "Matrix data file contains variable with existing name %s." msgstr "矩阵数据缺少变量%s。" #: src/language/commands/matrix.c:8455 #, c-format msgid "Matrix data file variable %s contains a missing value, which was treated as zero." msgid_plural "Matrix data file variable %s contains %zu missing values, which were treated as zero." msgstr[0] "" #: src/language/commands/matrix.c:8484 msgid "ROWTYPE_ must precede VARNAME_ in matrix data file." msgstr "" #: src/language/commands/matrix.c:8489 #, fuzzy #| msgid "%s: Data file dictionary has no variables." msgid "Matrix data file contains no continuous variables." msgstr "%s: 数据文件字典没有变量。" #: src/language/commands/matrix.c:8499 #, fuzzy, c-format #| msgid "Target variable %s duplicates existing variable %s." msgid "Matrix data file contains unexpected string variable %s." msgstr "目标变量%s与现存变量%s冲突。" #: src/language/commands/matrix.c:8524 #, fuzzy #| msgid "Variables Created By %s" msgid "Matrix Variables Created by MGET" msgstr "从%s创建变量" #: src/language/commands/matrix.c:8532 src/language/commands/split-file.c:89 #, fuzzy #| msgid "Split File" msgid "Split Values" msgstr "拆分文件" #: src/language/commands/matrix.c:8540 #, fuzzy #| msgid "Factor" msgid "Factors" msgstr "因子" #: src/language/commands/matrix.c:8545 msgid "Dimensions" msgstr "" #: src/language/commands/matrix.c:8698 msgid "Argument of EIGEN must be symmetric." msgstr "" #: src/language/commands/matrix.c:8769 #, c-format msgid "SETDIAG destination matrix %s is uninitialized." msgstr "" #: src/language/commands/matrix.c:8793 #, c-format msgid "SETDIAG argument 2 must be a scalar or a vector, not a %zu×%zu matrix." msgstr "" #: src/language/commands/matrix.c:9060 #, c-format msgid "Premature END MATRIX within %s." msgstr "" #: src/language/commands/matrix.c:9126 #, fuzzy #| msgid "Unknown command `%s'." msgid "Unknown matrix command." msgstr "未知指令`%s'。" #: src/language/commands/matrix.c:9128 #, fuzzy, c-format #| msgid "%s is not yet implemented." msgid "Matrix command %s is not yet implemented." msgstr "%s尚未实现。" #: src/language/commands/matrix.c:9170 #, fuzzy #| msgid "Unexpected end of file in partial record reading %s." msgid "Unexpected end of input expecting matrix command." msgstr "读取不完全记录%s时文件意外结束。" #: src/language/commands/mcnemar.c:144 msgid "The McNemar test is appropriate only for dichotomous variables" msgstr "McNemar检验仅适用于二分变量" #: src/language/commands/mcnemar.c:226 src/language/commands/sign.c:105 msgid "Point Probability" msgstr "点概率" #: src/language/commands/mcnemar.c:229 src/language/commands/sign.c:78 #: src/language/commands/sign.c:108 src/language/commands/t-test-paired.c:199 #: src/language/commands/t-test-paired.c:257 #: src/language/commands/wilcoxon.c:242 src/language/commands/wilcoxon.c:281 #, fuzzy #| msgid "Pair %d" msgid "Pairs" msgstr "个案对数量%d" #: src/language/commands/mconvert.c:82 msgid "No active file is defined and no external file is specified on MATRIX=IN." msgstr "" #: src/language/commands/means-calc.c:443 msgid "Group Median" msgstr "组中位数" #: src/language/commands/means-calc.c:455 msgid "First" msgstr "第一个" #: src/language/commands/means-calc.c:456 msgid "Last" msgstr "最后一个" #: src/language/commands/means-calc.c:458 msgid "Percent N" msgstr "百分比N" #: src/language/commands/means-calc.c:459 msgid "Percent Sum" msgstr "百分比和" #: src/language/commands/means-calc.c:461 msgid "Harmonic Mean" msgstr "调和平均数" #: src/language/commands/means-calc.c:462 msgid "Geom. Mean" msgstr "几何平均数" #: src/language/commands/means.c:703 msgid "Included" msgstr "包含" #: src/language/commands/means.c:705 src/language/commands/reliability.c:495 msgid "Excluded" msgstr "排除" #: src/language/commands/means.c:754 msgid "Report" msgstr "报告" #: src/language/commands/means.c:837 #, fuzzy, c-format #| msgid "Dependent variable %s has no non-missing values. No analysis for this variable will be done." msgid "The table \"%s\" has no non-empty control variables. No result for this table will be displayed." msgstr "因变量%s不包含非缺失值，不对其进行分析。" #: src/language/commands/median.c:316 msgid "> Median" msgstr ">中位数" #: src/language/commands/median.c:316 msgid "≤ Median" msgstr "≤中位数" #: src/language/commands/missing-values.c:83 msgid "Too many numeric missing values. At most three individual values or one value and one range are allowed." msgstr "缺失值过多。最多允许三个单个值缺失或一个值及一个范围缺失。" #: src/language/commands/missing-values.c:109 #, c-format msgid "Truncating missing value to maximum acceptable length (%d bytes)." msgstr "将缺失值减少到可接受的最大长度（%d字节）。" #: src/language/commands/missing-values.c:122 msgid "Too many string missing values. At most three individual values are allowed." msgstr "字符串缺失值过多。 最多允许三个缺失值。" #: src/language/commands/missing-values.c:147 #, fuzzy, c-format #| msgid "Ignoring long string missing value record for numeric variable %s." msgid "Cannot assign string missing values to numeric variable %s." msgstr "忽略数字变量%s的长字符串缺失值记录。" #: src/language/commands/missing-values.c:151 #, fuzzy, c-format #| msgid "Missing values provided are too long to assign to variable of width %d." msgid "Missing values are too long to assign to variable %s with width %d." msgstr "指定的缺失值长度过长而不能赋于宽度为%d的变量。" #: src/language/commands/mrsets.c:132 #, fuzzy #| msgid "At least one variable must be specified." msgid "At least two variables are required." msgstr "至少指定一个变量。" #: src/language/commands/mrsets.c:167 msgid "Numeric VALUE must be an integer." msgstr "数值型值VALUE必需为整数。" #: src/language/commands/mrsets.c:197 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting integer or string." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/commands/mrsets.c:250 msgid "VARIABLES and VALUE must have the same type." msgstr "" #: src/language/commands/mrsets.c:253 #, fuzzy #| msgid "%s is not allowed with string variables." msgid "These are string variables." msgstr "%s不能用于字符串变量。" #: src/language/commands/mrsets.c:256 #, fuzzy #| msgid "Numeric _Variables:" msgid "These are numeric variables." msgstr "数字型变量(_V)：" #: src/language/commands/mrsets.c:259 #, fuzzy #| msgid "File ends in partial string value." msgid "This is a string value." msgstr "文件结束于不完整字符串值。" #: src/language/commands/mrsets.c:262 msgid "This is a numeric value." msgstr "" #: src/language/commands/mrsets.c:281 #, fuzzy #| msgid "The split point must be less than the number of variables" msgid "The VALUE string must be no longer than the narrowest variable in the group." msgstr "分割点必须小于变量数量" #: src/language/commands/mrsets.c:284 #, c-format msgid "The VALUE string is %d bytes long." msgstr "" #: src/language/commands/mrsets.c:287 #, fuzzy, c-format #| msgid "Variable %s is not dichotomous" msgid "Variable %s has a width of %d bytes." msgstr "变量%s不是二分变量" #: src/language/commands/mrsets.c:298 #, c-format msgid "MDGROUP subcommand for group %s specifies LABELSOURCE=VARLABEL but not CATEGORYLABELS=COUNTEDVALUES. Ignoring LABELSOURCE." msgstr "组%s的MDGROUP子命令设定LABELSOURCE=VARLABEL，而非CATEGORYLABELS=COUNTEDVALUES. LABELSOURCE将被忽略。" #: src/language/commands/mrsets.c:305 #, c-format msgid "MDGROUP subcommand for group %s specifies both LABEL and LABELSOURCE, but only one of these subcommands may be used at a time. Ignoring LABELSOURCE." msgstr "组%s的MDGROUP子命令同时设定了LABEL和LABELSOURCE，但这些子命令一次只能使用一个。LABELSOURCE将被忽略。" #: src/language/commands/mrsets.c:311 src/language/commands/mrsets.c:313 #, c-format msgid "Here is the %s setting." msgstr "" #: src/language/commands/mrsets.c:350 #, c-format msgid "Variables %s and %s specified as part of multiple dichotomy group %s have the same variable label. Categories represented by these variables will not be distinguishable in output." msgstr "变量%s和%s所在的多重二分组%s具有相同的变量标签。输出将无法区分出这些变量所代表的类别。" #: src/language/commands/mrsets.c:376 #, c-format msgid "Variable %s specified as part of multiple dichotomy group %s (which has CATEGORYLABELS=COUNTEDVALUES) has no value label for its counted value. This category will not be distinguishable in output." msgstr "变量%s所在的多重二分组%s(设置了CATEGORYLABELS=COUNTEDVALUES)没有为计数值指定值标签。输出中无法区分该类别。" #: src/language/commands/mrsets.c:390 #, c-format msgid "Variables %s and %s specified as part of multiple dichotomy group %s (which has CATEGORYLABELS=COUNTEDVALUES) have the same value label for the group's counted value. These categories will not be distinguishable in output." msgstr "变量%s和%s所在的多重二分组%s（设置了CATEGORYLABELS=COUNTEDVALUES）的计数值具有相同的值标签。输出将无法区分出这些类别。" #: src/language/commands/mrsets.c:447 #, c-format msgid "Variables specified on MCGROUP should have the same categories, but %s and %s (and possibly others) in multiple category group %s have different value labels for value %s." msgstr "MCGROUP指定的变量必须具有相同的类别，但%s和%s（可能还有其他）在多类别组%s中的值%s含有不同的值标签。" #: src/language/commands/mrsets.c:507 #, c-format msgid "No multiple response set named %s." msgstr "没有找到名称为%s的多重响应集。" #: src/language/commands/mrsets.c:561 msgid "The active dataset dictionary does not contain any multiple response sets." msgstr "活动数据集的字典没有包含任何多重响应集。" #: src/language/commands/mrsets.c:572 src/language/commands/sys-file-info.c:192 #: src/language/commands/sys-file-info.c:296 #: src/language/commands/sys-file-info.c:297 #: src/language/commands/sys-file-info.c:558 #: src/language/commands/sys-file-info.c:673 src/ui/gui/psppire-var-info.c:45 #: src/ui/gui/psppire-var-sheet-header.c:67 src/ui/gui/compute.ui:157 msgid "Label" msgstr "标签" #: src/language/commands/mrsets.c:572 src/language/commands/sys-file-info.c:242 #, fuzzy #| msgid "Encoding:" msgid "Encoding" msgstr "编码：" #: src/language/commands/mrsets.c:572 #, fuzzy #| msgid "Counted value" msgid "Counted Value" msgstr "计数值" #: src/language/commands/mrsets.c:572 #, fuzzy #| msgid "Cl_ear Variables" msgid "Member Variables" msgstr "清除变量(_e)" #: src/language/commands/mrsets.c:575 src/language/commands/sys-file-info.c:435 #: src/language/commands/sys-file-info.c:573 src/ui/gui/psppire-var-info.c:44 #: src/ui/gui/psppire-var-sheet-header.c:55 msgid "Name" msgstr "名称" #: src/language/commands/mrsets.c:592 msgid "Dichotomies" msgstr "" #: src/language/commands/npar.c:421 #, fuzzy, c-format #| msgid "Expecting %s, %s, %s or a number." msgid "Syntax error expecting %s, %s, %s or a number." msgstr "要求%s, %s, %s或数字。" #: src/language/commands/npar.c:584 #, c-format msgid "%d expected values were given, but the specified range (%d-%d) requires exactly %d values." msgstr "虽然要求的值%d已给出，但指定区间(%d-%d)要求值为%d。" #: src/language/commands/npar.c:765 src/language/commands/t-test-parser.c:179 #, fuzzy, c-format #| msgid "PAIRED was specified but the number of variables preceding WITH (%zu) did not match the number following (%zu)." msgid "PAIRED was specified, but the number of variables preceding WITH (%zu) does not match the number following (%zu)." msgstr "设定了PAIRED参数，但WITH前的变量数量(%zu)与其后的数量(%zu)不匹配。" #: src/language/commands/numeric.c:71 #, c-format msgid "Format type %s may not be used with a numeric variable." msgstr "格式类型%s可能不能用于数字变量。" #: src/language/commands/numeric.c:90 src/language/commands/numeric.c:150 #, c-format msgid "There is already a variable named %s." msgstr "名称为%s的变量已经存在。" #: src/language/commands/oneway.c:357 msgid "LSD" msgstr "最小显著差数(LSD)" #: src/language/commands/oneway.c:358 src/ui/gui/oneway.ui:680 msgid "Tukey HSD" msgstr "Tukey HSD" #: src/language/commands/oneway.c:359 src/ui/gui/oneway.ui:595 msgid "Bonferroni" msgstr "Bonferroni" #: src/language/commands/oneway.c:360 src/ui/gui/oneway.ui:646 msgid "Scheffé" msgstr "Scheffé" #: src/language/commands/oneway.c:361 msgid "Games-Howell" msgstr "Games-Howell" #: src/language/commands/oneway.c:362 src/ui/gui/oneway.ui:663 msgid "Šidák" msgstr "Šidák" #: src/language/commands/oneway.c:498 #, fuzzy #| msgid "The post hoc analysis method %s is not supported." msgid "Unknown post hoc analysis method." msgstr "不支持事后分析方法%s。" #: src/language/commands/oneway.c:778 #, c-format msgid "Dependent variable %s has no non-missing values. No analysis for this variable will be done." msgstr "因变量%s不包含非缺失值，不对其进行分析。" #: src/language/commands/oneway.c:855 #, c-format msgid "In contrast list %zu, the number of coefficients (%zu) does not equal the number of groups (%d). This contrast list will be ignored." msgstr "对比列表%zu中，系数数量(%zu)不等于组数(%d)，忽略该对比。" #: src/language/commands/oneway.c:867 #, c-format msgid "Coefficients for contrast %zu do not total zero" msgstr "对比%zu的系数这和非零" #: src/language/commands/oneway.c:900 msgid "ANOVA" msgstr "方差分析" #: src/language/commands/oneway.c:903 src/language/commands/regression.c:926 msgid "Sum of Squares" msgstr "平方和" #: src/language/commands/oneway.c:909 src/language/commands/sys-file-info.c:227 #: src/ui/gui/psppire-var-sheet-header.c:58 src/ui/gui/compute.ui:304 msgid "Type" msgstr "类型" #: src/language/commands/oneway.c:910 msgid "Between Groups" msgstr "组间" #: src/language/commands/oneway.c:910 msgid "Within Groups" msgstr "组内" #: src/language/commands/oneway.c:1004 src/language/commands/oneway.c:1186 #, fuzzy #| msgid "_Dependent Variable" msgid "Dependent Variable" msgstr "因变量(_D)" #: src/language/commands/oneway.c:1077 msgid "Test of Homogeneity of Variances" msgstr "方差齐性检验" #: src/language/commands/oneway.c:1080 msgid "Levene Statistic" msgstr "Levene氏统计" #: src/language/commands/oneway.c:1081 msgid "df1" msgstr "df1" #: src/language/commands/oneway.c:1082 msgid "df2" msgstr "df2" #: src/language/commands/oneway.c:1121 msgid "Contrast Coefficients" msgstr "对比系数" #: src/language/commands/oneway.c:1128 src/language/commands/oneway.c:1175 msgid "Contrast" msgstr "对比" #: src/language/commands/oneway.c:1165 msgid "Contrast Tests" msgstr "对比检验" #: src/language/commands/oneway.c:1168 msgid "Value of Contrast" msgstr "对比值" #: src/language/commands/oneway.c:1170 src/language/commands/regression.c:807 #: src/language/commands/t-test-indep.c:266 #: src/language/commands/t-test-one-sample.c:74 #: src/language/commands/t-test-paired.c:252 msgid "t" msgstr "t" #: src/language/commands/oneway.c:1181 msgid "Assumption" msgstr "" #: src/language/commands/oneway.c:1182 msgid "Assume equal variances" msgstr "假设方差相同" #: src/language/commands/oneway.c:1183 #, fuzzy #| msgid "Does not assume equal" msgid "Does not assume equal variances" msgstr "不假设方差相同" #: src/language/commands/oneway.c:1294 #, c-format msgid "Multiple Comparisons (%s)" msgstr "多重比较(%s)" #: src/language/commands/oneway.c:1300 #, fuzzy #| msgid "Mean Difference" msgid "Mean Difference (I - J)" msgstr "均值差异" #: src/language/commands/oneway.c:1305 #, c-format msgid "%g%% Confidence Interval" msgstr "%g%%的置信区间" #: src/language/commands/oneway.c:1312 msgid "(J) Family" msgstr "" #: src/language/commands/oneway.c:1316 msgid "(I) Family" msgstr "" #: src/language/commands/oneway.c:1332 #, fuzzy #| msgid "Runs Test" msgid "Test" msgstr "游程检验" #: src/language/commands/output.c:113 #, fuzzy, c-format #| msgid "Unknown command `%s'." msgid "Unknown cell class %s." msgstr "未知指令`%s'。" #: src/language/commands/permissions.c:115 #, fuzzy, c-format #| msgid "Cannot change mode of %s: %s" msgid "Cannot read permissions for %s: %s" msgstr "不能切换模式%s：%s" #: src/language/commands/permissions.c:129 #, fuzzy, c-format #| msgid "Cannot change mode of %s: %s" msgid "Cannot change permissions for %s: %s" msgstr "不能切换模式%s：%s" #: src/language/commands/placement-parser.c:96 #, c-format msgid "Number of variables specified (%zu) differs from number of variable formats (%zu)." msgstr "变量数量(%zu)与变量格式数目(%zu)不同。" #: src/language/commands/placement-parser.c:106 msgid "SPSS-like or Fortran-like format specification expected after variable names." msgstr "变量名称后要求类SPSS格式或Fortran格式。" #: src/language/commands/placement-parser.c:129 #, c-format msgid "The %d columns %d-%d can't be evenly divided into %zu fields." msgstr "%d个列%d-%d不能被均匀分成%zu个字段。" #: src/language/commands/placement-parser.c:335 msgid "Column positions for fields must be positive." msgstr "字段的列位置必须为正。" #: src/language/commands/placement-parser.c:338 msgid "Column positions for fields must not be negative." msgstr "字段的列位置必须为非负。" #: src/language/commands/placement-parser.c:391 msgid "The ending column for a field must be greater than the starting column." msgstr "字段列尾必须大于列头。" #: src/language/commands/print-space.c:137 #, c-format msgid "The expression on %s evaluated to the system-missing value." msgstr "表达式%s在求值后作为系统缺失值。" #: src/language/commands/print-space.c:141 #, c-format msgid "The expression on %s evaluated to %g." msgstr "表达式%s在求值后作为%g。" #: src/language/commands/print.c:214 #, c-format msgid "%s is required when binary formats are specified." msgstr "指定二进制格式后必须使用%s。" #: src/language/commands/print.c:299 #, c-format msgid "Output calls for %d records but %zu specified on RECORDS subcommand." msgstr "输出要求%d个记录，但RECORDS子命令设定为%zu。" #: src/language/commands/print.c:448 #, fuzzy #| msgid "Case Processing Summary" msgid "Print Summary" msgstr "个案处理总结" #: src/language/commands/print.c:478 #, fuzzy #| msgid "Record" msgid "N of Records" msgstr "记录" #: src/language/commands/quick-cluster.c:527 msgid "Initial Cluster Centers" msgstr "初始类群中心点" #: src/language/commands/quick-cluster.c:528 msgid "Final Cluster Centers" msgstr "结果类群中心点" #: src/language/commands/quick-cluster.c:531 #: src/language/commands/quick-cluster.c:606 #: src/language/commands/quick-cluster.c:607 #: src/language/commands/quick-cluster.c:703 msgid "Cluster" msgstr "类群" #: src/language/commands/quick-cluster.c:604 msgid "Cluster Membership" msgstr "类群归属" #: src/language/commands/quick-cluster.c:694 msgid "Number of Cases in each Cluster" msgstr "类群中个案数" #: src/language/commands/quick-cluster.c:700 #, fuzzy #| msgid "Cluster" msgid "Clusters" msgstr "类群" #: src/language/commands/quick-cluster.c:808 #: src/language/commands/quick-cluster.c:834 #, fuzzy, c-format #| msgid "Variable %s already exists." msgid "A variable called `%s' already exists." msgstr "变量%s已经存在。" #: src/language/commands/rank.c:213 #, c-format msgid "Cannot generate variable name for ranking %s with %s. All candidates in use." msgstr "不能为秩%s生成名称%s。可用名称均已被使用。" #: src/language/commands/rank.c:316 #, c-format msgid "Too many variables in %s clause." msgstr "%s子句变量过多。" #: src/language/commands/rank.c:318 #, c-format msgid "Variable %s already exists." msgstr "变量%s已经存在。" #: src/language/commands/rank.c:320 src/language/expressions/evaluate.c:193 #, c-format msgid "Duplicate variable name %s." msgstr "变量名称%s重复。" #: src/language/commands/rank.c:608 #, c-format msgid "%s of %s by %s" msgstr "%s源于%s经由%s" #: src/language/commands/rank.c:758 #, fuzzy #| msgid "Variables Created By %s" msgid "Variables Created by RANK" msgstr "从%s创建变量" #: src/language/commands/rank.c:760 src/language/commands/rank.c:761 #, fuzzy #| msgid "Name Variable:" msgid "New Variable" msgstr "名称变量：" #: src/language/commands/rank.c:761 #, fuzzy #| msgid "Function: " msgid "Function" msgstr "函数" #: src/language/commands/rank.c:762 #, fuzzy #| msgid "Extraction" msgid "Fraction" msgstr "提取" #: src/language/commands/rank.c:762 #, fuzzy #| msgid "_Grouping Variable:" msgid "Grouping Variables" msgstr "分组变量(_G)" #: src/language/commands/rank.c:765 src/language/commands/rank.c:766 #, fuzzy #| msgid "_Test Variable:" msgid "Existing Variable" msgstr "检验变量(_T)：" #: src/language/commands/recode.c:293 #, fuzzy #| msgid "CONVERT requires string input values and numeric output values." msgid "CONVERT requires string input values." msgstr "CONVERT要求输入为字符串值，而输出为数字值。" #: src/language/commands/recode.c:299 #, fuzzy #| msgid "Inconsistent target variable types. Target variables must be all numeric or all string." msgid "Output values must be all numeric or all string." msgstr "目标变量不一致。目标变量必须全部为数字型或全部为字符串型。" #: src/language/commands/recode.c:313 #, fuzzy #| msgid "The filter variable must be numeric." msgid "This output value is numeric." msgstr "过滤变量必须为数字型。" #: src/language/commands/recode.c:315 #, fuzzy #| msgid "Output variables are _strings" msgid "This output value is string." msgstr "输出变量为字符串(_s)" #: src/language/commands/recode.c:374 #, c-format msgid "%s is not allowed with string variables." msgstr "%s不能用于字符串变量。" #: src/language/commands/recode.c:439 #, fuzzy #| msgid "expecting output value" msgid "Syntax error expecting output value." msgstr "要求输出值" #: src/language/commands/recode.c:487 #, fuzzy #| msgid "Source variable count (%zu) does not match target variable count (%zu)." msgid "Source and target variable counts must match." msgstr "源变量数量(%zu)与目标变量数量(%zu)不一致。" #: src/language/commands/recode.c:489 #, fuzzy, c-format #| msgid "There is already a variable named %s." msgid "There is %zu source variable." msgid_plural "There are %zu source variables." msgstr[0] "名称为%s的变量已经存在。" #: src/language/commands/recode.c:494 #, fuzzy, c-format #| msgid "There is already a variable named %s." msgid "There is %zu target variable." msgid_plural "There are %zu target variables." msgstr[0] "名称为%s的变量已经存在。" #: src/language/commands/recode.c:509 #, fuzzy #| msgid "There is no variable named %s. (All string variables specified on INTO must already exist. Use the STRING command to create a string variable.)" msgid "All string variables specified on INTO must already exist. (Use the STRING command to create a string variable.)" msgstr "变量%s不存在。（所有INTO语句中的字符串变量必须为已创建变量。使用STRING可以创建字符串变量）" #: src/language/commands/recode.c:513 #, fuzzy, c-format #| msgid "There is no dataset named %s." msgid "There is no variable named %s." msgstr "没有名称为%s的数据集。" #: src/language/commands/recode.c:529 #, fuzzy #| msgid "INTO is required with %s input values and %s output values." msgid "INTO is required with numeric input values and string output values." msgstr "INTO要求%s的输入值和%s的输出值。" #: src/language/commands/recode.c:533 #, fuzzy #| msgid "INTO is required with %s input values and %s output values." msgid "INTO is required with string input values and numeric output values." msgstr "INTO要求%s的输入值和%s的输出值。" #: src/language/commands/recode.c:546 #, fuzzy, c-format #| msgid "Type mismatch. Cannot store %s data in %s variable %s." msgid "Type mismatch: cannot store string data in numeric variable %s." msgstr "类型不匹配。不能将%s数据存放于%s变量%s中。" #: src/language/commands/recode.c:550 #, fuzzy, c-format #| msgid "Type mismatch. Cannot store %s data in %s variable %s." msgid "Type mismatch: cannot store numeric data in string variable %s." msgstr "类型不匹配。不能将%s数据存放于%s变量%s中。" #: src/language/commands/recode.c:589 msgid "At least one target variable is too narrow for the output values." msgstr "" #: src/language/commands/recode.c:592 #, c-format msgid "This output value has width %d." msgstr "" #: src/language/commands/recode.c:595 #, fuzzy, c-format #| msgid "Target variable %s duplicates existing variable %s." msgid "Target variable %s only has width %d." msgstr "目标变量%s与现存变量%s冲突。" #: src/language/commands/regression.c:213 #: src/language/commands/regression.c:219 #, c-format msgid "VARIABLES may not appear after %s" msgstr "变量不能出现在%s之后" #: src/language/commands/regression.c:379 msgid "REGRESSION with SAVE ignores TEMPORARY. Temporary transformations will be made permanent." msgstr "带SAVE选项的REGRESSION忽略TEMPORARY选项。临时变换将被保存。" #: src/language/commands/regression.c:384 msgid "REGRESSION with SAVE ignores FILTER. All cases will be processed." msgstr "带 SAVE 选项的 REGRESSION 将忽略 FILTER 选项。所有个案都参与分析。" #: src/language/commands/regression.c:506 msgid "The dependent variable is equal to the independent variable. The least squares line is therefore Y=X. Standard errors and related statistics may be meaningless." msgstr "因变量等于自变量。最小二乘直线为Y=X。标准误及相关统计量无意义。" #: src/language/commands/regression.c:683 msgid "No valid data found. This command was skipped." msgstr "没有找到有效数据，忽略该指令。" #: src/language/commands/regression.c:765 #, c-format msgid "Model Summary (%s)" msgstr "模型总结(%s)" #: src/language/commands/regression.c:770 #: src/ui/gui/psppire-dialog-action-regression.c:42 msgid "R" msgstr "R" #: src/language/commands/regression.c:770 msgid "R Square" msgstr "R平方" #: src/language/commands/regression.c:770 msgid "Adjusted R Square" msgstr "调整后的R平方" #: src/language/commands/regression.c:771 msgid "Std. Error of the Estimate" msgstr "估值的标准误" #: src/language/commands/regression.c:797 #, c-format msgid "Coefficients (%s)" msgstr "系数(%s)" #: src/language/commands/regression.c:803 msgid "Unstandardized Coefficients" msgstr "未标准化系数" #: src/language/commands/regression.c:806 msgid "Standardized Coefficients" msgstr "标准化后系数" #: src/language/commands/regression.c:806 msgid "Beta" msgstr "Beta" #: src/language/commands/regression.c:813 #, c-format msgid "%g%% Confidence Interval for B" msgstr "B的%g%%置信区间" #: src/language/commands/regression.c:821 #, fuzzy #| msgid "Reliability Statistics" msgid "Collinearity Statistics" msgstr "信度统计量" #: src/language/commands/regression.c:822 #, fuzzy #| msgid "Covariance" msgid "Tolerance" msgstr "协方差" #: src/language/commands/regression.c:822 msgid "VIF" msgstr "" #: src/language/commands/regression.c:835 msgid "(Constant)" msgstr "(常量)" #: src/language/commands/regression.c:922 #, c-format msgid "ANOVA (%s)" msgstr "方差分析(%s)" #: src/language/commands/regression.c:977 #, c-format msgid "Coefficient Correlations (%s)" msgstr "相关系数(%s)" #: src/language/commands/regression.c:984 #, fuzzy #| msgid "Model" msgid "Models" msgstr "模型" #: src/language/commands/regression.c:992 msgid "Covariances" msgstr "协方差" #: src/language/commands/reliability.c:152 msgid "Reliability on a single variable is not useful." msgstr "单个变量的信度用处不大。" #: src/language/commands/reliability.c:260 msgid "The STATISTICS subcommand is not yet implemented. No statistics will be produced." msgstr "暂不支持STATISTICS 子命令。将不输出统计量。" #: src/language/commands/reliability.c:276 #, fuzzy #| msgid "The split point must be less than the number of variables" msgid "The split point must be less than the number of variables." msgstr "分割点必须小于变量数量" #: src/language/commands/reliability.c:279 #, fuzzy, c-format #| msgid "Test variable" msgid "There is %zu variable." msgid_plural "There are %zu variables." msgstr[0] "检验变量" #: src/language/commands/reliability.c:476 #, c-format msgid "Scale: %s" msgstr "评分：%s" #: src/language/commands/reliability.c:529 msgid "Item-Total Statistics" msgstr "项-总计统计量" #: src/language/commands/reliability.c:532 msgid "Scale Mean if Item Deleted" msgstr "删除该项后的均值" #: src/language/commands/reliability.c:533 msgid "Scale Variance if Item Deleted" msgstr "删除该项后的方差" #: src/language/commands/reliability.c:534 msgid "Corrected Item-Total Correlation" msgstr "该项与总表的相关" #: src/language/commands/reliability.c:535 msgid "Cronbach's Alpha if Item Deleted" msgstr "删除该项后的Cronbach氏Alpha" #: src/language/commands/reliability.c:574 msgid "Reliability Statistics" msgstr "信度统计量" #: src/language/commands/reliability.c:581 #: src/language/commands/reliability.c:593 msgid "Cronbach's Alpha" msgstr "Cronbach氏Alpha" #: src/language/commands/reliability.c:582 #: src/language/commands/reliability.c:596 #: src/language/commands/reliability.c:599 msgid "N of Items" msgstr "项数 N" #: src/language/commands/reliability.c:594 msgid "Part 1" msgstr "第1部分" #: src/language/commands/reliability.c:597 msgid "Part 2" msgstr "第2部分" #: src/language/commands/reliability.c:601 msgid "Total N of Items" msgstr "总项数 N" #: src/language/commands/reliability.c:603 msgid "Correlation Between Forms" msgstr "形式间相关性" #: src/language/commands/reliability.c:606 msgid "Spearman-Brown Coefficient" msgstr "Spearman-Brown系数" #: src/language/commands/reliability.c:607 msgid "Equal Length" msgstr "长度相等" #: src/language/commands/reliability.c:608 msgid "Unequal Length" msgstr "长度不等" #: src/language/commands/reliability.c:610 msgid "Guttman Split-Half Coefficient" msgstr "Guttman Split-Half系数" #: src/language/commands/rename-variables.c:50 #, c-format msgid "%s may not be used after %s. Temporary transformations will be made permanent." msgstr "%s不能用于%s之后。临时变换将被永久保存。" #: src/language/commands/rename-variables.c:79 #, c-format msgid "Differing number of variables in old name list (%zu) and in new name list (%zu)." msgstr "区分旧名称列表(%zu)和新名称列表(%zu)的变量数量。" #: src/language/commands/rename-variables.c:101 #, c-format msgid "Variable %s is of class %s, but renaming it to %s would make it of class %s." msgstr "" #: src/language/commands/rename-variables.c:116 #, c-format msgid "Renaming would duplicate variable name %s." msgstr "重命名的新变量名称%s已经存在。" #: src/language/commands/repeat.c:108 #, c-format msgid "Dummy variable name `%s' hides dictionary variable `%s'." msgstr "虚拟变量名称`%s'覆盖字典变量`%s'。" #: src/language/commands/repeat.c:112 #, c-format msgid "Dummy variable name `%s' is given twice." msgstr "虚拟变量名`%s'重复指定。" #: src/language/commands/repeat.c:140 #, fuzzy #| msgid "expecting output value" msgid "Syntax error expecting substitution values." msgstr "要求输出值" #: src/language/commands/repeat.c:148 #, fuzzy #| msgid "Syntax error at end of command" msgid "Syntax error expecting `/' or end of command." msgstr "指令结尾处语法错误" #: src/language/commands/repeat.c:159 msgid "Each dummy variable must have the same number of substitutions." msgstr "" #: src/language/commands/repeat.c:163 src/language/commands/repeat.c:168 #, fuzzy, c-format #| msgid "Dummy variable `%s' had %zu substitutions, so `%s' must also, but %zu were specified." msgid "Dummy variable %s had %zu substitution." msgid_plural "Dummy variable %s had %zu substitutions." msgstr[0] "虚拟变量`%s'具有%zu个替代值，`%s'应具相同设置，但%zu已经被指定。" #: src/language/commands/repeat.c:274 msgid "Syntax error expecting END REPEAT." msgstr "" #: src/language/commands/repeat.c:285 #, c-format msgid "Expansion %zu of %zu" msgstr "" #: src/language/commands/repeat.c:359 msgid "Ranges may only have integer bounds." msgstr "区间仅可使用整数作为边界。" #: src/language/commands/repeat.c:374 #, c-format msgid "%ld TO %ld is an invalid range." msgstr "区间%ld TO %ld 不符合要求。" #: src/language/commands/repeat.c:422 #, c-format msgid "No matching %s." msgstr "找不到%s。" #: src/language/commands/roc.c:862 msgid "Area Under the Curve" msgstr "曲线下面积" #: src/language/commands/roc.c:866 msgid "Area" msgstr "面积" #: src/language/commands/roc.c:872 msgid "Asymptotic Sig." msgstr "渐进显著度" #: src/language/commands/roc.c:875 #, c-format msgid "Asymp. %g%% Confidence Interval" msgstr "渐进%g%%的置信区间" #: src/language/commands/roc.c:883 msgid "Variable under test" msgstr "检验变量" #: src/language/commands/roc.c:921 msgid "Case Summary" msgstr "个案总结" #: src/language/commands/roc.c:925 msgid "Unweighted" msgstr "未加权" #: src/language/commands/roc.c:926 msgid "Weighted" msgstr "加权" #: src/language/commands/roc.c:959 msgid "Coordinates of the Curve" msgstr "曲线的坐标" #: src/language/commands/roc.c:962 msgid "Positive if greater than or equal to" msgstr "正，若大于等于" #: src/language/commands/roc.c:963 src/output/charts/roc-chart-cairo.c:38 msgid "Sensitivity" msgstr "灵敏度" #: src/language/commands/roc.c:963 src/output/charts/roc-chart-cairo.c:37 msgid "1 - Specificity" msgstr "1 - 特异度" #: src/language/commands/roc.c:966 #, fuzzy #| msgid "ordinary" msgid "Coordinates" msgstr "普通" #: src/language/commands/roc.c:970 msgid "Test variable" msgstr "检验变量" #: src/language/commands/runs.c:169 #, c-format msgid "Multiple modes exist for variable `%s'. Using %.*g as the threshold value." msgstr "变量`%s'有多个众数。使用%.*g作为阈值。" #: src/language/commands/runs.c:314 src/ui/gui/runs.ui:24 msgid "Runs Test" msgstr "游程检验" #: src/language/commands/runs.c:319 msgid "Test Value" msgstr "检验值" #: src/language/commands/runs.c:320 msgid "Test Value (mode)" msgstr "检验值(众数)" #: src/language/commands/runs.c:321 msgid "Test Value (mean)" msgstr "检验值(均值)" #: src/language/commands/runs.c:322 msgid "Test Value (median)" msgstr "检验值(中位数)" #: src/language/commands/runs.c:323 msgid "Cases < Test Value" msgstr "<检验值的个案" #: src/language/commands/runs.c:324 msgid "Cases ≥ Test Value" msgstr "≥检验值的个案" #: src/language/commands/runs.c:325 msgid "Total Cases" msgstr "个案总数" #: src/language/commands/runs.c:326 msgid "Number of Runs" msgstr "运行次数" #: src/language/commands/save-translate.c:149 #: src/language/commands/save-translate.c:164 #, c-format msgid "The %s string must contain exactly one character." msgstr "字符串%s必须包含仅一个字符。" #: src/language/commands/save-translate.c:237 #, c-format msgid "Output file `%s' exists but %s was not specified." msgstr "输出文件`%s'已经存在，但没有指定%s。" #: src/language/commands/save.c:308 msgid "The OUTFILE or METADATA subcommand is required." msgstr "" #: src/language/commands/select-if.c:112 msgid "The filter variable must be numeric." msgstr "过滤变量必须为数字型。" #: src/language/commands/select-if.c:119 msgid "The filter variable may not be scratch." msgstr "过滤变量不能为临时变量。" #: src/language/commands/set.c:264 msgid "ISL (32-bit IEEE 754 single, little-endian)" msgstr "ISL (32-位 IEEE 754 单精度，小端序)" #: src/language/commands/set.c:267 msgid "ISB (32-bit IEEE 754 single, big-endian)" msgstr "ISB (32-位 IEEE 754 单精度，大端序)" #: src/language/commands/set.c:270 msgid "IDL (64-bit IEEE 754 double, little-endian)" msgstr "IDL (64-位 IEEE 754 双精度，小端序)" #: src/language/commands/set.c:273 msgid "IDB (64-bit IEEE 754 double, big-endian)" msgstr "IDB (64-位 IEEE 754 双精度，大端序)" #: src/language/commands/set.c:277 msgid "VF (32-bit VAX F, VAX-endian)" msgstr "VF (32-位 VAX F，VAX-端序)" #: src/language/commands/set.c:280 msgid "VD (64-bit VAX D, VAX-endian)" msgstr "VD (64-位 VAX D，VAX-端序)" #: src/language/commands/set.c:283 msgid "VG (64-bit VAX G, VAX-endian)" msgstr "VG (64-位 VAX G，VAX-端序)" #: src/language/commands/set.c:287 msgid "ZS (32-bit IBM Z hexadecimal short, big-endian)" msgstr "ZS (32-位 IBM Z 短16进制，大端序)" #: src/language/commands/set.c:290 msgid "ZL (64-bit IBM Z hexadecimal long, big-endian)" msgstr "ZL (64-位 IBM Z 长16进制，大端序)" #: src/language/commands/set.c:502 #, fuzzy, c-format #| msgid "expecting %s or year" msgid "Syntax error expecting %s or year." msgstr "要求%s可年份" #: src/language/commands/set.c:549 #, c-format msgid "%s requires numeric output format as an argument. Specified format %s is of type string." msgstr "%s要求数字输入格式作为参数，而设定的格式%s是字符串。" #: src/language/commands/set.c:623 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting ON or OFF or a file name." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/commands/set.c:696 #, c-format msgid "%s is not a recognized encoding or locale name" msgstr "无法识别编码或语言环境名称%s" #: src/language/commands/set.c:1251 #, fuzzy #| msgid "expecting %s" msgid "Settings" msgstr "要求%s" #: src/language/commands/set.c:1252 msgid "Setting" msgstr "" #: src/language/commands/set.c:1290 #, fuzzy #| msgid "Information Area" msgid "System Information" msgstr "信息区" #: src/language/commands/set.c:1293 #, fuzzy #| msgid "Regression" msgid "Version" msgstr "回归" #: src/language/commands/set.c:1294 #, fuzzy #| msgid "system" msgid "Host System" msgstr "系统" #: src/language/commands/set.c:1295 msgid "Build System" msgstr "" #: src/language/commands/set.c:1298 msgid "Locale Directory" msgstr "" #: src/language/commands/set.c:1301 src/ui/gui/options.ui:401 #, fuzzy #| msgid "Portable File" msgid "Journal File" msgstr "便携格式文件" #: src/language/commands/set.c:1303 #, fuzzy #| msgid "Compression:" msgid "Compiler Version" msgstr "压缩：" #: src/language/commands/set.c:1381 src/language/commands/set.c:1493 #: src/language/commands/set.c:1500 #, fuzzy #| msgid "Syntax error expecting OFF or BY. Turning off case filtering." msgid "Syntax error expecting the name of a setting." msgstr "语法错误，应为OFF或BY。关闭个案过滤器。" #: src/language/commands/set.c:1423 #, fuzzy #| msgid "Test _Variables" msgid "Environment Variables" msgstr "检验变量(_V)" #: src/language/commands/set.c:1542 #, c-format msgid "Too many %s commands without a %s: at most %d levels of saved settings are allowed." msgstr "过多%s命令没有带%s：保存的水平设置最多允许%d水平。" #: src/language/commands/set.c:1565 #, c-format msgid "%s without matching %s." msgstr "%s没有匹配%s。" #: src/language/commands/sign.c:72 #, fuzzy #| msgid "Mean Difference" msgid "Differences" msgstr "均值差异" #: src/language/commands/sign.c:73 msgid "Negative Differences" msgstr "负差异" #: src/language/commands/sign.c:74 msgid "Positive Differences" msgstr "正差异" #: src/language/commands/sign.c:75 src/language/commands/wilcoxon.c:239 msgid "Ties" msgstr "相同" #: src/language/commands/sort-criteria.c:90 #, c-format msgid "Variable %s specified twice in sort criteria." msgstr "排序标准中变量%s设定了两次。" #: src/language/commands/split-file.c:68 #, fuzzy #| msgid "At least one variable must be specified." msgid "At most 8 split variables may be specified." msgstr "至少指定一个变量。" #: src/language/commands/sys-file-info.c:185 #, fuzzy #| msgid "_Display Data File Information" msgid "File Information" msgstr "显示数据文件信息(_D)" #: src/language/commands/sys-file-info.c:188 #, fuzzy #| msgid "File:" msgid "File" msgstr "文件：" #: src/language/commands/sys-file-info.c:195 #, fuzzy #| msgid "Created:" msgid "Created" msgstr "创建：" #: src/language/commands/sys-file-info.c:204 #, fuzzy #| msgid "Integer Format:" msgid "Integer Format" msgstr "整数格式：" #: src/language/commands/sys-file-info.c:206 msgid "Big Endian" msgstr "大端序（Big Endian）" #: src/language/commands/sys-file-info.c:207 msgid "Little Endian" msgstr "小端序（Little Endian）" #: src/language/commands/sys-file-info.c:210 #, fuzzy #| msgid "Real Format:" msgid "Real Format" msgstr "实数格式：" #: src/language/commands/sys-file-info.c:212 msgid "IEEE 754 LE." msgstr "IEEE 754 标准小端序。" #: src/language/commands/sys-file-info.c:213 msgid "IEEE 754 BE." msgstr "IEEE 754 标准大端序。" #: src/language/commands/sys-file-info.c:214 msgid "VAX D." msgstr "VAX D." #: src/language/commands/sys-file-info.c:215 msgid "VAX G." msgstr "VAX G." #: src/language/commands/sys-file-info.c:216 msgid "IBM 390 Hex Long." msgstr "IBM 390 16进制长格式。" #: src/language/commands/sys-file-info.c:234 #, fuzzy #| msgid "Not weighted." msgid "Not weighted" msgstr "没有加权。" #: src/language/commands/sys-file-info.c:236 #, fuzzy #| msgid "Compression:" msgid "Compression" msgstr "压缩：" #: src/language/commands/sys-file-info.c:246 #: src/language/commands/sys-file-info.c:527 #: src/language/commands/sys-file-info.c:529 #, fuzzy #| msgid "Comments:" msgid "Documents" msgstr "注释：" #: src/language/commands/sys-file-info.c:300 #: src/language/commands/sys-file-info.c:533 msgid "(none)" msgstr "" #: src/language/commands/sys-file-info.c:388 msgid "No variables to display." msgstr "没有可用于显示的变量。" #: src/language/commands/sys-file-info.c:414 #, fuzzy #| msgid "No variables to display." msgid "No macros to display." msgstr "没有可用于显示的变量。" #: src/language/commands/sys-file-info.c:427 msgid "Macros" msgstr "" #: src/language/commands/sys-file-info.c:432 #, fuzzy #| msgid "Correlation" msgid "Source Location" msgstr "相关" #: src/language/commands/sys-file-info.c:466 #, fuzzy #| msgid "No variables specified." msgid "No variable sets defined." msgstr "没有指定变量。" #: src/language/commands/sys-file-info.c:470 #, fuzzy #| msgid "Variables" msgid "Variable Sets" msgstr "变量" #: src/language/commands/sys-file-info.c:474 #, fuzzy #| msgid "Variables in the Equation" msgid "Variable Set and Position" msgstr "公式中的变量" #: src/language/commands/sys-file-info.c:501 #: src/ui/gui/psppire-spreadsheet-model.c:246 msgid "(empty)" msgstr "(空)" #: src/language/commands/sys-file-info.c:557 src/ui/gui/psppire-var-info.c:46 msgid "Position" msgstr "位置" #: src/language/commands/sys-file-info.c:559 src/ui/gui/psppire-var-info.c:47 msgid "Measurement Level" msgstr "" #: src/language/commands/sys-file-info.c:560 src/ui/gui/psppire-var-info.c:48 #: src/ui/gui/psppire-var-sheet-header.c:85 msgid "Role" msgstr "角色" #: src/language/commands/sys-file-info.c:561 src/ui/gui/psppire-var-info.c:49 #: src/ui/gui/psppire-var-sheet-header.c:61 src/ui/gui/compute.ui:216 msgid "Width" msgstr "宽度" #: src/language/commands/sys-file-info.c:562 src/ui/gui/psppire-var-info.c:50 #, fuzzy #| msgid "Align" msgid "Alignment" msgstr "对齐" #: src/language/commands/sys-file-info.c:563 #: src/language/commands/sys-file-info.c:837 src/ui/gui/psppire-var-info.c:51 msgid "Print Format" msgstr "打印格式" #: src/language/commands/sys-file-info.c:564 src/ui/gui/psppire-var-info.c:52 #, fuzzy #| msgid "Print Format" msgid "Write Format" msgstr "打印格式" #: src/language/commands/sys-file-info.c:676 #, fuzzy #| msgid "Variable View" msgid "Variable Value" msgstr "变量视图" #: src/language/commands/sys-file-info.c:680 #, fuzzy #| msgid "Last non-missing value" msgid "User-missing value" msgstr "最后一个非缺失值" #: src/language/commands/sys-file-info.c:796 #, fuzzy #| msgid "Variable under test" msgid "Variable and Dataset Attributes" msgstr "检验变量" #: src/language/commands/sys-file-info.c:802 #, fuzzy #| msgid "Variable Name: " msgid "Variable and Name" msgstr "变量名称：" #: src/language/commands/sys-file-info.c:805 #, fuzzy #| msgid "dataset" msgid "(dataset)" msgstr "数据集" #: src/language/commands/sys-file-info.c:825 msgid "No vectors defined." msgstr "没有定义向量。" #: src/language/commands/sys-file-info.c:835 #, fuzzy #| msgid "Vector" msgid "Vectors" msgstr "向量" #: src/language/commands/sys-file-info.c:839 msgid "Vector and Position" msgstr "" #: src/language/commands/sys-file-info.c:1101 msgid "No valid encodings found." msgstr "没有找到有效的编码。" #: src/language/commands/sys-file-info.c:1107 #, c-format msgid "Usable encodings for %s." msgstr "可用于%s的编码。" #: src/language/commands/sys-file-info.c:1111 #, c-format msgid "Encodings that can successfully read %s (by specifying the encoding name on the GET command's ENCODING subcommand). Encodings that yield identical text are listed together." msgstr "能顺利读取%s的编码（通过GET指令下的ENCODING指定的编码）。将读取出相同文本的编码一并列出。" #: src/language/commands/sys-file-info.c:1116 #: src/language/commands/sys-file-info.c:1117 msgid "Encodings" msgstr "编码" #: src/language/commands/sys-file-info.c:1146 #, fuzzy, c-format #| msgid "%s encoded text strings." msgid "%s Encoded Text Strings" msgstr "%s已编码文字字符串。" #: src/language/commands/sys-file-info.c:1151 msgid "Text strings in the file dictionary that the previously listed encodings interpret differently, along with the interpretations." msgstr "文件字典为先前的编码转码结果有异的文本字符串以及转码结果。" #: src/language/commands/sys-file-info.c:1154 src/output/output-item.c:715 #: src/output/output-item.c:744 src/ui/gui/psppire-import-textfile.c:271 msgid "Text" msgstr "文本" #: src/language/commands/sys-file-info.c:1164 msgid "Purpose" msgstr "目标" #: src/language/commands/t-test-indep.c:190 msgid "Group Statistics" msgstr "组统计量" #: src/language/commands/t-test-indep.c:200 src/output/output-item.c:235 #, fuzzy #| msgid "Group1" msgid "Group" msgstr "第1组" #: src/language/commands/t-test-indep.c:256 msgid "Independent Samples Test" msgstr "独立样本检验" #: src/language/commands/t-test-indep.c:261 msgid "Levene's Test for Equality of Variances" msgstr "Levene氏方差齐性检验" #: src/language/commands/t-test-indep.c:265 #, fuzzy #| msgid "t-test for Equality of Means" msgid "T-Test for Equality of Means" msgstr "均值相同t检验" #: src/language/commands/t-test-indep.c:269 #: src/language/commands/t-test-one-sample.c:77 msgid "Mean Difference" msgstr "均值差异" #: src/language/commands/t-test-indep.c:270 msgid "Std. Error Difference" msgstr "差异的标准误" #: src/language/commands/t-test-indep.c:273 #, fuzzy, no-c-format #| msgid "%g%% Confidence Interval of the Difference" msgid "95% Confidence Interval of the Difference" msgstr "差异的%g%%置信区间" #: src/language/commands/t-test-indep.c:277 #, fuzzy #| msgid "Options" msgid "Assumptions" msgstr "选项" #: src/language/commands/t-test-indep.c:278 msgid "Equal variances assumed" msgstr "假设方差相同" #: src/language/commands/t-test-indep.c:279 msgid "Equal variances not assumed" msgstr "不假设方差相同" #: src/language/commands/t-test-one-sample.c:64 msgid "One-Sample Test" msgstr "单样本检验" #: src/language/commands/t-test-one-sample.c:71 #, fuzzy, c-format #| msgid "Test Value = %f" msgid "Test Value = %.*g" msgstr "检验值=%f" #: src/language/commands/t-test-one-sample.c:80 #: src/language/commands/t-test-paired.c:246 #, c-format msgid "%g%% Confidence Interval of the Difference" msgstr "差异的%g%%置信区间" #: src/language/commands/t-test-one-sample.c:122 msgid "One-Sample Statistics" msgstr "单样本统计量" #: src/language/commands/t-test-paired.c:147 msgid "Paired Sample Statistics" msgstr "成对样本统计量" #: src/language/commands/t-test-paired.c:163 #: src/language/commands/t-test-paired.c:205 #: src/language/commands/t-test-paired.c:263 #, fuzzy, c-format #| msgid "Pair %d" msgid "Pair %zu" msgstr "个案对数量%d" #: src/language/commands/t-test-paired.c:190 msgid "Paired Samples Correlations" msgstr "成对样本相关" #: src/language/commands/t-test-paired.c:208 #, c-format msgid "%s & %s" msgstr "%s 和 %s" #: src/language/commands/t-test-paired.c:234 msgid "Paired Samples Test" msgstr "成对样本检验" #: src/language/commands/t-test-paired.c:240 msgid "Paired Differences" msgstr "个案对之差" #: src/language/commands/t-test-paired.c:266 #, c-format msgid "%s - %s" msgstr "%s - %s" #: src/language/commands/t-test-parser.c:138 #, c-format msgid "When applying %s to a string variable, two values must be specified." msgstr "将%s应用于字符串变量时，须同时指定两个值。" #: src/language/commands/t-test-parser.c:151 #: src/language/commands/t-test-parser.c:231 #, c-format msgid "%s subcommand may not be used with %s." msgstr "%s子指令必须与%s一起使用。" #: src/language/commands/t-test-parser.c:293 msgid "Exactly one of TESTVAL, GROUPS and PAIRS subcommands must be specified." msgstr "必须三个子指令TESTVAL、GROUPS和PAIRS中的一个。" #: src/language/commands/temporary.c:44 msgid "This command may only appear once between procedures and procedure-like commands." msgstr "该指令在过程与类过程中间仅可使用一次。" #: src/language/commands/title.c:104 #, c-format msgid " (Entered %s)" msgstr " (输入为%s)" #: src/language/commands/trim.c:105 msgid "Old and new variable counts do not match." msgstr "" #: src/language/commands/trim.c:107 #, fuzzy, c-format #| msgid "There is already a variable named %s." msgid "There is %zu old variable." msgid_plural "There are %zu old variables." msgstr[0] "名称为%s的变量已经存在。" #: src/language/commands/trim.c:111 #, fuzzy, c-format #| msgid "There is already a variable named %s." msgid "There is %zu new variable name." msgid_plural "There are %zu new variable names." msgstr[0] "名称为%s的变量已经存在。" #: src/language/commands/trim.c:124 #, c-format msgid "Requested renaming duplicates variable name %s." msgstr "请求重命令重复的变量名称%s。" #: src/language/commands/trim.c:157 msgid "Cannot DROP all variables from dictionary." msgstr "不能DROP字典的所有变量。" #: src/language/commands/value-labels.c:153 #, c-format msgid "Truncating value label to %d bytes." msgstr "将值标签截短至%d字节。" #: src/language/commands/vector.c:73 #, c-format msgid "A vector named %s already exists." msgstr "名称为%s的向量已经存在。" #: src/language/commands/vector.c:82 #, c-format msgid "Vector name %s is given twice." msgstr "名称为%s的向量重复。" #: src/language/commands/vector.c:103 msgid "Only a single vector name may be specified when a list of variables is given." msgstr "" #: src/language/commands/vector.c:129 #, fuzzy #| msgid "Subcommand %s may only be specified once." msgid "Vector length may only be specified once." msgstr "子命令%s可能被多次指定。" #: src/language/commands/vector.c:143 #, fuzzy #| msgid "Only one index clause may be specified." msgid "Only one format may be specified." msgstr "仅可指定一个索引语句。" #: src/language/commands/vector.c:159 #, fuzzy #| msgid "expecting vector length" msgid "Syntax error expecting vector length or format." msgstr "要求向量长度" #: src/language/commands/vector.c:169 msgid "Vector length is required." msgstr "" #: src/language/commands/vector.c:192 #, c-format msgid "%s is an existing variable name." msgstr "变量名%s已存在。" #: src/language/commands/vector.c:204 #, c-format msgid "Two different vectors add variable %s%zu." msgstr "" #: src/language/commands/weight.c:50 msgid "The weighting variable must be numeric." msgstr "权重变量须为数值。" #: src/language/commands/weight.c:56 msgid "The weighting variable may not be scratch." msgstr "权重变量不能做临时变量。" #: src/language/commands/wilcoxon.c:237 #, fuzzy #| msgid "_Sign" msgid "Sign" msgstr "符号(_S)" #: src/language/commands/wilcoxon.c:238 msgid "Negative Ranks" msgstr "负秩" #: src/language/commands/wilcoxon.c:238 msgid "Positive Ranks" msgstr "正秩" #: src/language/commands/wilcoxon.c:285 #, fuzzy #| msgid "Too many pairs to calculate exact significance." msgid "Too many pairs to calculate exact significance" msgstr "过多数据对，无法计算确切显著度。" #: src/language/tests/moments-test.c:50 #, fuzzy #| msgid "expecting weight value" msgid "Syntax error expecting weight value." msgstr "要求权重值" #: src/language/expressions/evaluate.c:179 #, fuzzy #| msgid "expecting number or string" msgid "Syntax error expecting number or string." msgstr "要求数字或字符串" #: src/language/expressions/helpers.c:44 #, c-format msgid "Invalid arguments to %s function." msgstr "" #: src/language/expressions/helpers.c:117 #, c-format msgid "Unrecognized date unit `%.*s'. Valid date units are `%s', `%s', `%s', `%s', `%s', `%s', `%s', and `%s'." msgstr "时期单位`%.*s'无法识别。有效的时期单位为`%s', `%s', `%s', `%s', `%s', `%s', `%s' 和 `%s'。" #: src/language/expressions/helpers.c:273 #, c-format msgid "Invalid DATESUM method. Valid choices are `%s' and `%s'." msgstr "DATESUM方法无效。有效选项为`%s' 和 `%s'。" #: src/language/expressions/helpers.c:519 #, c-format msgid "Index outside valid range 1 to %zu, inclusive, for vector %s. The value will be treated as system-missing." msgstr "" #: src/language/expressions/helpers.c:524 #, fuzzy #| msgid "Too-large number set to system-missing." msgid "The index is system-missing." msgstr "系统缺失数字值设置过大。" #: src/language/expressions/helpers.c:527 #, fuzzy, c-format #| msgid "The expression on %s evaluated to %g." msgid "The index has value %g." msgstr "表达式%s在求值后作为%g。" #: src/language/expressions/parse.c:117 #, fuzzy, c-format #| msgid "Type mismatch: expression has %s type, but a string value is required here." msgid "Type mismatch: expression has %s type, but a boolean value is required here." msgstr "类型不匹配：表达式含%s类型，但该处要求字符串。" #: src/language/expressions/parse.c:148 #, c-format msgid "This command tries to create a new variable %s by assigning a string value to it, but this is not supported. Use the STRING command to create the new variable with the correct width before assigning to it, e.g. STRING %s(A20)." msgstr "" #: src/language/expressions/parse.c:314 #, fuzzy, c-format #| msgid "Type mismatch: expression has %s type, but a numeric value is required here." msgid "Type mismatch: expression has type '%s', but a numeric value is required." msgstr "类型不匹配：表达式含%s类型，但该处要求数值型。" #: src/language/expressions/parse.c:325 #, fuzzy, c-format #| msgid "Type mismatch: expression has %s type, but a string value is required here." msgid "Type mismatch: expression has type '%s', but a string value is required." msgstr "类型不匹配：表达式含%s类型，但该处要求字符串。" #: src/language/expressions/parse.c:641 #, c-format msgid "Both operands of %s must have the same type." msgstr "" #: src/language/expressions/parse.c:644 #, fuzzy, c-format #| msgid "The filter variable must be numeric." msgid "Both operands of %s must be numeric." msgstr "过滤变量必须为数字型。" #: src/language/expressions/parse.c:649 src/language/expressions/parse.c:652 #, c-format msgid "This operand has type '%s'." msgstr "" #: src/language/expressions/parse.c:702 #, c-format msgid "The unary %s operator requires a numeric operand." msgstr "" #: src/language/expressions/parse.c:705 #, c-format msgid "The operand of %s has type '%s'." msgstr "" #: src/language/expressions/parse.c:744 #, fuzzy #| msgid "Chaining relational operators (e.g. `a < b < c') will not produce the mathematically expected result. Use the AND logical operator to fix the problem (e.g. `a < b AND b < c'). If chaining is really intended, parentheses will disable this warning (e.g. `(a < b) < c'.)" msgid "Chaining relational operators (e.g. `a < b < c') will not produce the mathematically expected result. Use the AND logical operator to fix the problem (e.g. `a < b AND b < c'). To disable this warning, insert parentheses." msgstr "连锁运算(例如：`a < b < c')可能产生与预期不同的结果。使用逻辑运算符AND解决该问题(例如：`a < b AND b < c)。若仍要进行连锁运算，使用括号以消除本警告信息(如：`(a < b) < c')。" #: src/language/expressions/parse.c:913 #, c-format msgid "Unknown system variable %s." msgstr "未知系统变量%s。" #: src/language/expressions/parse.c:961 #, c-format msgid "Unknown identifier %s." msgstr "未知标识符%s。" #: src/language/expressions/parse.c:999 #, fuzzy #| msgid "Syntax error in date field." msgid "Syntax error parsing expression." msgstr "日期字段语法错误。" #: src/language/expressions/parse.c:1050 #, fuzzy #| msgid "The filter variable must be numeric." msgid "A vector index must be numeric." msgstr "过滤变量必须为数字型。" #: src/language/expressions/parse.c:1053 #, fuzzy, c-format #| msgid "There is no vector named %s." msgid "This vector index has type '%s'." msgstr "无法找到名称为%s的向量。" #: src/language/expressions/parse.c:1205 #, fuzzy, c-format #| msgid "%s must have an even number of arguments in list." msgid "%s must have an odd number of arguments." msgstr "%s要求参数的数量为偶数。" #: src/language/expressions/parse.c:1215 #, fuzzy, c-format #| msgid "%s function does not accept a minimum valid argument count." msgid "%s function cannot accept suffix .%d to specify the minimum number of valid arguments." msgstr "函数%s不接受最小有效参数数量的参数。" #: src/language/expressions/parse.c:1226 #, c-format msgid "For %s with %d arguments, at most %d (not %d) may be required to be valid." msgstr "" #: src/language/expressions/parse.c:1275 #, c-format msgid "Type mismatch invoking %s as " msgstr "调用%s时类型不匹配" #: src/language/expressions/parse.c:1280 msgid "Function invocation " msgstr "函数调用" #: src/language/expressions/parse.c:1282 msgid " does not match any known function. Candidates are:" msgstr "与已知函数不匹配，可选范围：" #: src/language/expressions/parse.c:1314 #, c-format msgid "This argument has type '%s' but '%s' is required." msgstr "" #: src/language/expressions/parse.c:1333 #, c-format msgid "No function or vector named %s." msgstr "没有名称为%s的函数或向量。" #: src/language/expressions/parse.c:1411 #, c-format msgid "%s is a PSPP extension." msgstr "%s是PSPP扩展名。" #: src/language/expressions/parse.c:1415 #, c-format msgid "%s is not available in this version of PSPP." msgstr "当前版本的PSPP不支持%s。" #: src/language/expressions/parse.c:1422 #, c-format msgid "%s may not appear after %s." msgstr "%s不能出现在%s之后。" #: src/libpspp/ext-array.c:76 msgid "failed to create temporary file" msgstr "无法创建临时文件" #: src/libpspp/ext-array.c:116 msgid "seeking in temporary file" msgstr "在临时文件中查找" #: src/libpspp/ext-array.c:135 msgid "reading temporary file" msgstr "读取临时文件" #: src/libpspp/ext-array.c:137 msgid "unexpected end of file reading temporary file" msgstr "读取临时文件时文件意外结束" #: src/libpspp/ext-array.c:157 msgid "writing to temporary file" msgstr "写入到临时文件" #: src/libpspp/i18n.c:1194 msgid "Arabic" msgstr "阿拉伯语" #: src/libpspp/i18n.c:1196 msgid "Armenian" msgstr "亚美尼亚语" #: src/libpspp/i18n.c:1197 msgid "Baltic" msgstr "波罗的语" #: src/libpspp/i18n.c:1199 msgid "Celtic" msgstr "凯尔特语" #: src/libpspp/i18n.c:1200 msgid "Central European" msgstr "中欧" #: src/libpspp/i18n.c:1202 msgid "Chinese Simplified" msgstr "简体中文" #: src/libpspp/i18n.c:1204 msgid "Chinese Traditional" msgstr "繁体中文" #: src/libpspp/i18n.c:1206 msgid "Croatian" msgstr "克罗地亚语" #: src/libpspp/i18n.c:1207 msgid "Cyrillic" msgstr "西里尔语" #: src/libpspp/i18n.c:1209 msgid "Cyrillic/Russian" msgstr "西里尔/俄语" #: src/libpspp/i18n.c:1210 msgid "Cyrillic/Ukrainian" msgstr "西里尔/乌克兰语" #: src/libpspp/i18n.c:1212 msgid "Georgian" msgstr "格鲁吉亚语" #: src/libpspp/i18n.c:1213 msgid "Greek" msgstr "希腊语" #: src/libpspp/i18n.c:1214 msgid "Gujarati" msgstr "古吉拉特文" #: src/libpspp/i18n.c:1215 msgid "Gurmukhi" msgstr "古木基文" #: src/libpspp/i18n.c:1216 msgid "Hebrew" msgstr "希伯来语" #: src/libpspp/i18n.c:1218 msgid "Hebrew Visual" msgstr "希伯来符号" #: src/libpspp/i18n.c:1219 msgid "Hindi" msgstr "印地语" #: src/libpspp/i18n.c:1220 msgid "Icelandic" msgstr "冰岛语" #: src/libpspp/i18n.c:1221 msgid "Japanese" msgstr "日语" #: src/libpspp/i18n.c:1223 msgid "Korean" msgstr "韩语" #: src/libpspp/i18n.c:1225 msgid "Nordic" msgstr "挪威语" #: src/libpspp/i18n.c:1226 msgid "Romanian" msgstr "罗马尼亚语" #: src/libpspp/i18n.c:1228 msgid "South European" msgstr "南欧" #: src/libpspp/i18n.c:1229 msgid "Thai" msgstr "泰文" #: src/libpspp/i18n.c:1231 msgid "Turkish" msgstr "土耳其语" #: src/libpspp/i18n.c:1233 msgid "Vietnamese" msgstr "越南语" #: src/libpspp/i18n.c:1235 msgid "Western European" msgstr "西欧" #: src/libpspp/message.c:321 msgid "error" msgstr "错误" #: src/libpspp/message.c:323 msgid "warning" msgstr "警告" #: src/libpspp/message.c:326 msgid "note" msgstr "提示" #: src/libpspp/message.c:548 #, c-format msgid "Notes (%d) exceed limit (%d). Suppressing further notes." msgstr "提示(%d)超过上限(%d)。不再提示。" #: src/libpspp/message.c:556 #, c-format msgid "Warnings (%d) exceed limit (%d). Syntax processing will be halted." msgstr "警告(%d)超过上限(%d)。停止语法处理。" #: src/libpspp/message.c:559 #, c-format msgid "Errors (%d) exceed limit (%d). Syntax processing will be halted." msgstr "错误(%d)超过上限(%d)。停止语法处理。" #: src/libpspp/zip-reader.c:192 #, fuzzy, c-format #| msgid "unexpected end of file" msgid "%s: unexpected end of file" msgstr "文件意外结束" #: src/libpspp/zip-reader.c:200 #, fuzzy, c-format #| msgid "%s: error reading input file" msgid "%s: I/O error reading Zip archive (%s)" msgstr "%s：读取输入文件错误" #: src/libpspp/zip-reader.c:202 #, fuzzy, c-format #| msgid "%s: error reading input file" msgid "%s: I/O error reading Zip archive" msgstr "%s：读取输入文件错误" #: src/libpspp/zip-reader.c:218 #, fuzzy, c-format #| msgid "Corrupt file at 0x%llx: Expected %; got %" msgid "%s: corrupt archive at 0x%llx: expected %# but got %#" msgstr "文件于0x%llx处损坏：要求%；实际为%" #: src/libpspp/zip-reader.c:246 #, c-format msgid "%s: corrupt archive reading member \"%s\": bad CRC %# (expected %)" msgstr "" #: src/libpspp/zip-reader.c:344 src/libpspp/zip-reader.c:458 #, fuzzy, c-format #| msgid "%s: seek failed (%s)." msgid "%s: open failed (%s)" msgstr "%s: 查找失败 (%s)." #: src/libpspp/zip-reader.c:359 #, fuzzy, c-format #| msgid "Cannot find central directory" msgid "%s: cannot find central directory" msgstr "找不到中间目录" #: src/libpspp/zip-reader.c:363 src/libpspp/zip-reader.c:390 #: src/libpspp/zip-reader.c:476 #, fuzzy, c-format #| msgid "%s: seek failed (%s)." msgid "%s: seek failed (%s)" msgstr "%s: 查找失败 (%s)." #: src/libpspp/zip-reader.c:453 #, fuzzy, c-format #| msgid "%s: unknown option `%s'" msgid "%s: unknown member \"%s\"" msgstr "%s: 未知选项 `%s'" #: src/libpspp/zip-reader.c:491 #, c-format msgid "%s: member \"%s\" has unknown compression type %" msgstr "" #: src/libpspp/zip-reader.c:514 #, fuzzy, c-format #| msgid "Name mismatch in zip archive. Central directory says `%s'; local file header says `%s'" msgid "%s: name mismatch between central directory (%s) and local file header (%s)" msgstr "zip文档名称不匹配，中央目录上为`%s'，而本地文件头上显示为`%s'" #: src/libpspp/zip-reader.c:710 #, fuzzy, c-format #| msgid "Cannot initialize inflator: %s" msgid "%s: cannot initialize inflator (%s)" msgstr "无法初始化膨胀因子：%s" #: src/libpspp/zip-reader.c:769 #, fuzzy, c-format #| msgid "Error inflating: %s" msgid "%s: error inflating \"%s\" (%s)" msgstr "膨胀处理出错：%s" #: src/libpspp/zip-writer.c:106 utilities/pspp-convert.c:351 #, c-format msgid "%s: error opening output file" msgstr "%s：打开输出文件出错" #: src/libpspp/zip-writer.c:114 #, c-format msgid "%s: not writing ZIP file to terminal" msgstr "" #: src/libpspp/zip-writer.c:195 #, c-format msgid "%s: error seeking in output file" msgstr "%s：输出文件查找出错" #: src/libpspp/zip-writer.c:325 #, c-format msgid "%s: write failed" msgstr "%s：写入失败" #. TRANSLATORS: This is a format string which, when presented to #. printf like functions, will create a pango markup string to #. display real number in scientific notation. #. #. In its untranslated form, it will display similar to "1.23 x 10^4". You #. can leave it untranslated if this is how scientific notation is usually #. presented in your language. #. #. Some locales (such as German) prefer the centered dot rather than the #. multiplication sign between the mantissa an exponent. In which #. case, you can change "#215;" to "#8901;" or other unicode code #. point as appropriate. #. #. The . in this string does not and should not be changed, since #. that is taken care of by the stdc library. #. #. For information on Pango markup, see #. http://developer.gnome.org/pango/stable/PangoMarkupFormat.html #. #. For tables of unicode code points, see http://unicode.org/charts #. #: src/math/chart-geometry.c:137 #, fuzzy, c-format #| msgid "%%.%dlf×10%d" msgid "%%.%dlf×10%d" msgstr "%%.%dlf×10%d" #: src/math/histogram.c:140 msgid "Not creating histogram because the data contains less than 2 distinct values" msgstr "数据含有少于两个不同值，不绘制直方图" #: src/math/shapiro-wilk.c:83 msgid "One or more weight values are non-integer. Fractional parts will be ignored when calculating the Shapiro-Wilk statistic." msgstr "" #: src/output/ascii.c:376 #, c-format msgid "ascii: opening output file `%s'" msgstr "ascii: 打开输出文件`%s'" #: src/output/ascii.c:475 #, c-format msgid "%s: %s must be positive integer or `auto'" msgstr "%s: %s必须为正整数或`auto'" #: src/output/ascii.c:495 #, fuzzy, c-format #| msgid "ascii: page excluding margins and headers must be at least %d characters wide by %d lines long, but as configured is only %d characters by %d lines" msgid "ascii: page must be at least %d characters wide, but as configured is only %d characters" msgstr "ascii: 去除边距和文件头的页面宽度至少为%d字符，行数至少为%d，但设置宽度却为%d字符、行数为%d行" #: src/output/ascii.c:603 #, fuzzy, c-format #| msgid "See %s for a chart." msgid "See %s for an image." msgstr "图表参考%s。" #: src/output/ascii.c:622 #, c-format msgid "See %s for a chart." msgstr "图表参考%s。" #: src/output/cairo-chart.c:695 #, c-format msgid "error writing output file `%s': %s" msgstr "写入输入文件`%s'出错: %s" #: src/output/cairo.c:175 #, c-format msgid "`%s': bad font specification" msgstr "%s': 字体设置错误" #: src/output/cairo.c:278 #, c-format msgid "error opening output file `%s': %s" msgstr "打开输出文件错误`%s': %s" #: src/output/cairo.c:523 #, fuzzy, c-format #| msgid "error drawing output for %s driver: %s" msgid "error drawing output for %s driver: %s\n" msgstr "为驱动%s创建输出时出错：%s" #: src/output/charts/barchart-cairo.c:65 msgid "Bar Chart" msgstr "条形图" #: src/output/charts/np-plot-cairo.c:37 #, c-format msgid "Normal Q-Q Plot of %s" msgstr "%s的正态分布Q-Q图" #: src/output/charts/np-plot-cairo.c:38 src/output/charts/np-plot-cairo.c:68 msgid "Observed Value" msgstr "观察值" #: src/output/charts/np-plot-cairo.c:39 msgid "Expected Normal" msgstr "期望值" #: src/output/charts/np-plot-cairo.c:67 #, c-format msgid "Detrended Normal Q-Q Plot of %s" msgstr "%s的去除趋势正态Q-Q图" #: src/output/charts/np-plot-cairo.c:69 msgid "Dev from Normal" msgstr "偏离正态值" #: src/output/charts/piechart.c:54 msgid "*MISSING*" msgstr "*缺少值*" #: src/output/charts/plot-hist-cairo.c:71 #, fuzzy, c-format #| msgid "N = %.2f" msgid "N = %.0f" msgstr "总数 = %.2f" #: src/output/charts/plot-hist-cairo.c:120 msgid "HISTOGRAM" msgstr "直方图" #: src/output/charts/roc-chart-cairo.c:36 src/ui/gui/roc.ui:24 msgid "ROC Curve" msgstr "ROC曲线" #: src/output/charts/scatterplot-cairo.c:57 #, c-format msgid "Scatterplot %s" msgstr "散点图%s" #: src/output/charts/scree-cairo.c:36 msgid "Scree Plot" msgstr "碎石图" #: src/output/charts/scree-cairo.c:38 msgid "Eigenvalue" msgstr "特征值" #: src/output/charts/spreadlevel-cairo.c:37 #, c-format msgid "Spread vs. Level Plot of %s" msgstr "%s展布 vs. 水平图" #: src/output/charts/spreadlevel-cairo.c:38 msgid "Level" msgstr "水平" #: src/output/charts/spreadlevel-cairo.c:39 msgid "Spread" msgstr "展布" #: src/output/csv.c:81 src/output/html.c:184 src/output/journal.c:180 #: src/output/msglog.c:67 src/output/tex.c:124 #, c-format msgid "error opening output file `%s'" msgstr "打开输出文件出错`%s'" #: src/output/driver.c:599 #, c-format msgid "%s: unknown option `%s'" msgstr "%s: 未知选项 `%s'" #: src/output/driver.c:617 #, c-format msgid "%s: output option missing `='" msgstr "%s: 输出选项缺少`='" #: src/output/driver.c:624 #, c-format msgid "%s: output option specified more than once" msgstr "%s: 输出选项指定多次" #: src/output/html.c:104 msgid "PSPP Output" msgstr "PSPP输入" #: src/output/html.c:265 msgid "No description" msgstr "没有描述" #: src/output/journal.c:68 #, c-format msgid "error writing output file `%s'" msgstr "写入输入文件`%s'时出错" #: src/output/measure.c:66 #, c-format msgid "`%s' is not a valid length." msgstr "长度`%s'无效。" #: src/output/measure.c:93 #, c-format msgid "syntax error in paper size `%s'" msgstr "页面大小`%s'语法错误" #: src/output/measure.c:226 #, c-format msgid "unknown paper type `%.*s'" msgstr "未知的纸张类型`%.*s'" #: src/output/measure.c:243 #, c-format msgid "error opening input file `%s'" msgstr "打开输入文件`%s'出错" #: src/output/measure.c:271 #, c-format msgid "file `%s' does not state a paper size" msgstr "文件`%s'没有设置纸张大小" #: src/output/options.c:81 #, c-format msgid "%s: `%s' is `%s' but a Boolean value is required" msgstr "%s: `%s' 是 `%s'，但要求提供一个布尔值" #: src/output/options.c:141 #, c-format msgid "%s: `%s' is `%s' but one of the following is required: %s" msgstr "%s: `%s' 是 `%s'，但是要求提供下列当中的一个：%s" #: src/output/options.c:181 #, fuzzy, c-format #| msgid "%s: `%s' is `%s' but a nonnegative integer is required" msgid "%s: `%s' is `%s' but a non-negative integer is required" msgstr "%s: `%s' 是 `%s'，但要求提供一个非负整数" #: src/output/options.c:185 #, c-format msgid "%s: `%s' is `%s' but a positive integer is required" msgstr "%s: `%s' 是 `%s'，但要求提供一个正整数" #: src/output/options.c:188 #, c-format msgid "%s: `%s' is `%s' but an integer is required" msgstr "%s: `%s' 是 `%s'，但要求提供一个整数" #: src/output/options.c:191 #, c-format msgid "%s: `%s' is `%s' but an integer greater than %d is required" msgstr "%s: `%s' 是 `%s'，但要求提供一个大于%d的整数" #: src/output/options.c:196 #, c-format msgid "%s: `%s' is `%s' but an integer between %d and %d is required" msgstr "%s: `%s' 是 `%s'，但要求提供一个介于%d到%d之间的整数" #: src/output/options.c:257 #, c-format msgid "%s: `%s' is `%s' but a file name that contains `#' is required." msgstr "%s: `%s' 是 `%s'，但要求文件包含`#'" #: src/output/options.c:534 #, c-format msgid "%s: `%s' is `%s', which could not be parsed as a color" msgstr "" #: src/output/output-item.c:232 #, fuzzy #| msgid "Bar Chart" msgid "Chart" msgstr "条形图" #: src/output/output-item.c:241 src/output/pivot-table.c:989 #: src/output/spv/spv.c:535 msgid "Error" msgstr "错误" #: src/output/output-item.c:242 #, fuzzy #| msgid "warning" msgid "Warning" msgstr "警告" #: src/output/output-item.c:243 msgid "Note" msgstr "" #: src/output/output-item.c:246 msgid "Page Break" msgstr "" #: src/output/output-item.c:252 #, fuzzy #| msgid "Variable" msgid "Table" msgstr "变量" #: src/output/output-item.c:734 msgid "Page Title" msgstr "" #: src/output/output-item.c:741 msgid "Log" msgstr "" #: src/output/pivot-table.c:3237 #, fuzzy, c-format #| msgid "Suppressed %d additional related warnings." msgid "Suppressed %d additional warning about duplicate split values." msgid_plural "Suppressed %d additional warnings about duplicate split values." msgstr[0] "%d的相关警告没有显示。" #: src/output/pivot-table.c:3376 #, c-format msgid "When SPLIT FILE is in effect, the input data must be sorted by the split variables (for example, using SORT CASES), but multiple runs of cases with the same split values were found separated by cases with different values. Each run will be analyzed separately. The duplicate split values are: %s" msgstr "" #. TRANSLATORS: Do not translate this string. If the script of your language #. reads from right to left (eg Persian, Arabic, Hebrew etc), then replace #. this string with "output-direction-rtl". Otherwise either leave it #. untranslated or copy it verbatim. #: src/output/render.c:1041 msgid "output-direction-ltr" msgstr "output-direction-ltr" #: src/output/spv/spv-legacy-decoder.c:1951 msgid "Table lacks cell data." msgstr "" #: src/output/spv/spv-table-look.c:602 #, fuzzy, c-format #| msgid "%s: stat failed (%s)." msgid "%s: create failed (%s)" msgstr "%s: 状态统计失败 (%s)." #: src/output/spv/spv-table-look.c:609 #, fuzzy, c-format #| msgid "%s: file too large." msgid "%s: failed to start writing XML" msgstr "%s：文件太大。" #: src/output/spv/spv-table-look.c:738 #, fuzzy, c-format #| msgid "%s: error writing output file" msgid "%s: error writing file (%s)" msgstr "%s：写入输出文件错误" #: src/output/spv/spv-writer.c:73 #, fuzzy, c-format #| msgid "%s: write failed" msgid "%s: create failed" msgstr "%s：写入失败" #: src/output/spv/spv-writer.c:94 #, fuzzy #| msgid "%s: error writing output file" msgid "I/O error writing SPV file" msgstr "%s：写入输出文件错误" #: src/output/spv/spv.c:428 #, fuzzy, c-format #| msgid "failed to create temporary file" msgid "%s: Failed to create XML parser" msgstr "无法创建临时文件" #: src/output/spv/spv.c:453 #, c-format msgid "%s: document is not well-formed" msgstr "" #: src/output/spv/spv.c:461 #, c-format msgid "%s: root node is \"%s\" but \"%s\" was expected" msgstr "" #: src/ui/gui/psppire-acr.c:273 msgid "Add" msgstr "添加" #: src/ui/gui/psppire-acr.c:274 msgid "Edit" msgstr "编辑" #: src/ui/gui/psppire-acr.c:275 msgid "Remove" msgstr "移除" #: src/ui/gui/psppire-buttonbox.c:298 msgid "OK" msgstr "确定" #: src/ui/gui/psppire-buttonbox.c:306 msgid "Go To" msgstr "转到" #: src/ui/gui/psppire-buttonbox.c:314 msgid "Continue" msgstr "继续" #: src/ui/gui/psppire-buttonbox.c:326 src/ui/gui/psppire-import-assistant.c:450 msgid "Paste" msgstr "粘贴" #: src/ui/gui/psppire-buttonbox.c:332 src/ui/gui/find-dialog.c:197 msgid "Find" msgstr "查找" #: src/ui/gui/psppire-buttonbox.c:336 #: src/ui/gui/psppire-dialog-action-aggregate.c:210 #: src/ui/gui/psppire-data-window.c:497 src/ui/gui/psppire-data-window.c:625 #: src/ui/gui/psppire-output-window.c:314 #: src/ui/gui/psppire-syntax-window.c:669 src/ui/gui/psppire-window.c:439 #: src/ui/gui/psppire-window.c:622 msgid "Cancel" msgstr "取消" #: src/ui/gui/psppire-buttonbox.c:342 msgid "Close" msgstr "关闭" #: src/ui/gui/psppire-buttonbox.c:349 src/ui/gui/psppire-import-assistant.c:451 msgid "Reset" msgstr "重置" #: src/ui/gui/psppire-buttonbox.c:356 msgid "Help" msgstr "帮助" #: src/ui/gui/psppire-data-sheet.c:176 src/ui/gui/psppire-data-window.c:1354 msgid "_Insert Case" msgstr "插入个案(_I)" #: src/ui/gui/psppire-data-sheet.c:184 src/ui/gui/psppire-data-window.c:1407 msgid "Cl_ear Cases" msgstr "清除个案(_e)" #: src/ui/gui/psppire-data-sheet.c:306 src/ui/gui/psppire-variable-sheet.c:280 #: src/ui/gui/psppire-data-window.c:1353 msgid "_Insert Variable" msgstr "插入变量(_I)" #: src/ui/gui/psppire-data-sheet.c:315 src/ui/gui/psppire-variable-sheet.c:289 msgid "Cl_ear Variables" msgstr "清除变量(_e)" #: src/ui/gui/psppire-data-sheet.c:327 msgid "Sort _Ascending" msgstr "升序排列(_A)" #: src/ui/gui/psppire-data-sheet.c:334 msgid "Sort _Descending" msgstr "降序排列(_D)" #: src/ui/gui/psppire-dialog-action-aggregate.c:207 msgid "Aggregate destination file" msgstr "汇总的目标文件" #: src/ui/gui/psppire-dialog-action-aggregate.c:220 #: src/ui/gui/psppire-data-window.c:504 msgid "System Files (*.sav)" msgstr "系统文件(*.sav)" #: src/ui/gui/psppire-dialog-action-aggregate.c:225 #: src/ui/gui/psppire-data-window.c:509 msgid "Compressed System Files (*.zsav)" msgstr "压缩系统文件(*.zsav)" #: src/ui/gui/psppire-dialog-action-aggregate.c:230 #: src/ui/gui/psppire-data-window.c:514 src/ui/gui/psppire-window.c:646 msgid "Portable Files (*.por) " msgstr "便携格式文件(*.por)" #: src/ui/gui/psppire-dialog-action-autorecode.c:332 #: src/ui/gui/psppire-dialog-action-recode.c:534 #: src/ui/gui/psppire-dialog-action-recode-different.c:288 msgid "New" msgstr "新" #: src/ui/gui/psppire-dialog-action-autorecode.c:346 #: src/ui/gui/psppire-dialog-action-recode.c:526 #: src/ui/gui/psppire-dialog-action-recode-different.c:301 msgid "Old" msgstr "旧" #: src/ui/gui/psppire-dialog-action-comments.c:137 #, c-format msgid "Column Number: %d" msgstr "列编号：%d" #: src/ui/gui/psppire-dialog-action-crosstabs.c:71 msgid "Chisq" msgstr "Chisq" #: src/ui/gui/psppire-dialog-action-crosstabs.c:71 msgid "Pearson chi-square, likelihood ratio, Fisher’s exact test, continuity correction, linear-by-linear association." msgstr "" #: src/ui/gui/psppire-dialog-action-crosstabs.c:74 #, fuzzy #| msgid "Cramer's V" msgid "Phi and Cramer's V" msgstr "Cramer's V" #: src/ui/gui/psppire-dialog-action-crosstabs.c:75 msgid "CC" msgstr "CC" #: src/ui/gui/psppire-dialog-action-crosstabs.c:75 #, fuzzy #| msgid "Contingency Coefficient" msgid "Contingency coefficient" msgstr "列联相关系数" #: src/ui/gui/psppire-dialog-action-crosstabs.c:77 msgid "UC" msgstr "UC" #: src/ui/gui/psppire-dialog-action-crosstabs.c:77 #, fuzzy #| msgid "Uncertainty Coefficient" msgid "Uncertainty coefficient" msgstr "不确定性系数" #: src/ui/gui/psppire-dialog-action-crosstabs.c:78 msgid "BTau" msgstr "BTau" #: src/ui/gui/psppire-dialog-action-crosstabs.c:78 #, fuzzy #| msgid "Kendall's tau-b" msgid "Kendall's Tau-b" msgstr "Kendall氏tau-b" #: src/ui/gui/psppire-dialog-action-crosstabs.c:79 msgid "CTau" msgstr "CTau" #: src/ui/gui/psppire-dialog-action-crosstabs.c:79 #, fuzzy #| msgid "Kendall's tau-c" msgid "Kendall's Tau-c" msgstr "Kendall氏tau-c" #: src/ui/gui/psppire-dialog-action-crosstabs.c:80 msgid "Risk" msgstr "风险" #: src/ui/gui/psppire-dialog-action-crosstabs.c:80 #, fuzzy #| msgid "Risk estimate." msgid "Relative Risk estimate" msgstr "风险估计。" #: src/ui/gui/psppire-dialog-action-crosstabs.c:82 msgid "D" msgstr "D" #: src/ui/gui/psppire-dialog-action-crosstabs.c:82 #, fuzzy #| msgid "Somers' d" msgid "Somer's d" msgstr "Somers氏d" #: src/ui/gui/psppire-dialog-action-crosstabs.c:83 msgid "Cohen's Kappa" msgstr "" #: src/ui/gui/psppire-dialog-action-crosstabs.c:85 msgid "Corr" msgstr "相关系数" #: src/ui/gui/psppire-dialog-action-crosstabs.c:85 #, fuzzy #| msgid "Spearman Correlation" msgid "Spearman correlation, Pearson's r" msgstr "Spearman相关" #: src/ui/gui/psppire-dialog-action-crosstabs.c:90 #, fuzzy #| msgid "Frequency" msgid "Frequency Count" msgstr "频率" #: src/ui/gui/psppire-dialog-action-crosstabs.c:91 msgid "Row" msgstr "行" #: src/ui/gui/psppire-dialog-action-crosstabs.c:91 #, fuzzy #| msgid "Percent" msgid "Row percent" msgstr "百分比" #: src/ui/gui/psppire-dialog-action-crosstabs.c:92 msgid "Column" msgstr "列" #: src/ui/gui/psppire-dialog-action-crosstabs.c:92 #, fuzzy #| msgid "Cum Percent" msgid "Column percent" msgstr "累积百分比" #: src/ui/gui/psppire-dialog-action-crosstabs.c:93 #, fuzzy #| msgid "Valid Percent" msgid "Total percent" msgstr "有效百分比" #: src/ui/gui/psppire-dialog-action-crosstabs.c:94 #, fuzzy #| msgid "Expected Values:" msgid "Expected value" msgstr "期待值：" #: src/ui/gui/psppire-dialog-action-crosstabs.c:96 #, fuzzy #| msgid "Std. Residual" msgid "Standardized Residual" msgstr "标准残差" #: src/ui/gui/psppire-dialog-action-crosstabs.c:97 msgid "Adjusted Std. Residual" msgstr "调整后标准残差" #: src/ui/gui/psppire-dialog-action-descriptives.c:45 msgid "Standard error" msgstr "标准误" #: src/ui/gui/psppire-dialog-action-descriptives.c:45 #, fuzzy #| msgid "Standard error of the mean" msgid "Standard error of mean" msgstr "均值标准误" #: src/ui/gui/psppire-dialog-action-descriptives.c:47 #, fuzzy #| msgid "Standard error of the kurtosis" msgid "Kurtosis and standard error of kurtosis" msgstr "峰度标准误" #: src/ui/gui/psppire-dialog-action-descriptives.c:48 #, fuzzy #| msgid "Standard error of the skewness" msgid "Skewness and standard error of skewness" msgstr "偏斜度标准误" #: src/ui/gui/psppire-dialog-action-factor.c:323 #, c-format msgid "_Eigenvalues over %4.2f times the mean eigenvalue" msgstr "大于平均特征根%4.2f倍的特征根(_E)" #: src/ui/gui/psppire-dialog-action-frequencies.c:44 msgid "Standard error of the mean" msgstr "均值标准误" #: src/ui/gui/psppire-dialog-action-frequencies.c:47 msgid "Standard error of the skewness" msgstr "偏斜度标准误" #: src/ui/gui/psppire-dialog-action-frequencies.c:51 msgid "Standard error of the kurtosis" msgstr "峰度标准误" #: src/ui/gui/psppire-dialog-action-oneway.c:175 #, c-format msgid "Contrast %d of %d" msgstr "对照%d，%d" #: src/ui/gui/psppire-dialog-action-paired.c:158 src/ui/gui/examine.ui:351 #: src/ui/gui/indep-samples.ui:334 src/ui/gui/t-test.ui:297 msgid "O_ptions..." msgstr "选项(_O)..." #: src/ui/gui/psppire-dialog-action-paired.c:164 msgid "Paired Samples T Test" msgstr "成对样本T检验" #: src/ui/gui/psppire-dialog-action-recode-different.c:327 msgid "Recode into Different Variables" msgstr "重编码到其他变量" #: src/ui/gui/psppire-dialog-action-recode-different.c:330 msgid "Recode into Different Variables: Old and New Values " msgstr "重编码到其他变量：旧、新值" #: src/ui/gui/psppire-dialog-action-recode-same.c:108 src/ui/gui/recode.ui:388 msgid "Recode into Same Variables" msgstr "重编码为到变量自身" #: src/ui/gui/psppire-dialog-action-recode-same.c:114 msgid "Recode into Same Variables: Old and New Values" msgstr "重编码到变量自身：旧、新值" #: src/ui/gui/psppire-dialog-action-regression.c:40 msgid "Coeff" msgstr "系数" #: src/ui/gui/psppire-dialog-action-regression.c:40 msgid "Show the regression coefficients" msgstr "显示回归系数" #: src/ui/gui/psppire-dialog-action-regression.c:41 msgid "Conf. Interval" msgstr "置信区间" #: src/ui/gui/psppire-dialog-action-regression.c:41 msgid "Show the confidence interval for the regression coefficients" msgstr "显示回归系数的置信区间" #: src/ui/gui/psppire-dialog-action-regression.c:42 msgid "Show the correlation between observed and predicted values" msgstr "显示观测值与估计值的相关性" #: src/ui/gui/psppire-dialog-action-regression.c:43 msgid "Anova" msgstr "方差分析" #: src/ui/gui/psppire-dialog-action-regression.c:43 msgid "Show the analysis of variance table" msgstr "显示方差分析表" #: src/ui/gui/psppire-dialog-action-regression.c:44 msgid "Bcov" msgstr "Bcov" #: src/ui/gui/psppire-dialog-action-regression.c:44 msgid "Show the variance coefficient matrix" msgstr "显示方差系数矩阵" #: src/ui/gui/psppire-dialog-action-regression.c:45 #, fuzzy #| msgid "Total" msgid "Tol" msgstr "总计" #: src/ui/gui/psppire-dialog-action-regression.c:45 #, fuzzy #| msgid "Show the variance coefficient matrix" msgid "Show the variance inflation factor and its reciprocal" msgstr "显示方差系数矩阵" #: src/ui/gui/psppire-dialog-action-select.c:88 #, c-format msgid "Approximately %3d%% of all cases." msgstr "大约所有个案中的%3d%%。" #: src/ui/gui/psppire-dialog-action-select.c:89 #, c-format msgid "Exactly %3d cases from the first %3d cases." msgstr "正好%3d个个案取于前%3d个个案内。" #: src/ui/gui/psppire-dialog-action-select.c:236 #, c-format msgid "%d thru %d" msgstr "%d到%d" #: src/ui/gui/psppire-dialog-action-ctables.c:187 #, fuzzy #| msgid "Category" msgid "Category 0" msgstr "类别" #: src/ui/gui/psppire-dialog-action-ctables.c:188 #, fuzzy #| msgid "Category" msgid "Category 1" msgstr "类别" #: src/ui/gui/psppire-dialog-action-two-sample.c:176 #: src/ui/gui/k-independent.ui:404 src/ui/gui/k-related.ui:197 msgid "Test Type" msgstr "检验类型" #: src/ui/gui/psppire-dialog-action-two-sample.c:185 msgid "_Wilcoxon" msgstr "_Wilcoxon" #: src/ui/gui/psppire-dialog-action-two-sample.c:186 msgid "_Sign" msgstr "符号(_S)" #: src/ui/gui/psppire-dialog-action-two-sample.c:187 msgid "_McNemar" msgstr "_McNemar" #: src/ui/gui/psppire-dialog-action-two-sample.c:205 msgid "Two-Related-Samples Tests" msgstr "两个相关样本的检验" #: src/ui/gui/psppire-dialog-action-weight.c:74 src/ui/gui/weight.ui:83 #: src/ui/gui/weight.ui:211 msgid "Do not weight cases" msgstr "不对个案加权" #: src/ui/gui/psppire-dialog-action-weight.c:80 #, c-format msgid "Weight cases by %s" msgstr "通过%s加权个案" #: src/ui/gui/psppire-search-dialog.c:136 msgid "Search Text:" msgstr "" #: src/ui/gui/psppire-search-dialog.c:150 msgid "Ignore case" msgstr "" #: src/ui/gui/psppire-search-dialog.c:153 src/ui/gui/find.ui:244 msgid "Wrap around" msgstr "换行" #: src/ui/gui/psppire-search-dialog.c:156 msgid "Match whole words only" msgstr "" #: src/ui/gui/psppire-search-dialog.c:159 #, fuzzy #| msgid "Search backward" msgid "Search forward" msgstr "后退查找" #: src/ui/gui/psppire-search-dialog.c:162 src/ui/gui/find.ui:260 msgid "Search backward" msgstr "后退查找" #: src/ui/gui/psppire-search-dialog.c:190 msgid "PSPPIRE Search Syntax" msgstr "" #: src/ui/gui/psppire-dict.c:96 #, fuzzy #| msgid "Var%d" msgid "Var" msgstr "Var%d" #. TRANSLATORS: This string must be a valid variable name. That means: #. - The string must be at most 64 bytes (not characters) long. #. - The string may not contain whitespace. #. - The first character may not be '$' #. - The first character may not be a digit #. - The final character may not be '.' or '_' #. #: src/ui/gui/psppire-dict.c:402 #, c-format msgid "Var%04d" msgstr "变量%04d" #: src/ui/gui/psppire-dictview.c:636 #, fuzzy #| msgid "Variable labels" msgid "Variable Details" msgstr "变量标签" #: src/ui/gui/psppire-dictview.c:711 msgid "Prefer variable labels" msgstr "首选变量标签" #: src/ui/gui/psppire-dictview.c:725 msgid "Default sort order" msgstr "默认排序" #: src/ui/gui/psppire-dictview.c:731 msgid "Unsorted (dictionary order)" msgstr "未排序（字典顺序）" #: src/ui/gui/psppire-dictview.c:736 msgid "Sort by name" msgstr "按名称排序" #: src/ui/gui/psppire-dictview.c:741 msgid "Sort by label" msgstr "按标签排序" #: src/ui/gui/psppire-dictview.c:749 #, fuzzy #| msgid "Variables in the Equation" msgid "Variable Information" msgstr "公式中的变量" #: src/ui/gui/psppire-keypad.c:332 #, fuzzy #| msgid "Add" msgid "add" msgstr "添加" #: src/ui/gui/psppire-keypad.c:336 #, fuzzy #| msgid "Extract" msgid "subtract" msgstr "提取" #: src/ui/gui/psppire-keypad.c:340 msgid "multiply" msgstr "" #: src/ui/gui/psppire-keypad.c:344 msgid "divide" msgstr "" #: src/ui/gui/psppire-keypad.c:359 msgid "raise x to the power of y" msgstr "" #: src/ui/gui/psppire-keypad.c:370 #, fuzzy #| msgid "Fraction greater than" msgid "is greater than" msgstr "高于下列值的比例" #: src/ui/gui/psppire-keypad.c:374 #, fuzzy #| msgid "Fraction less than" msgid "is less than" msgstr "低于下列值的比例" #: src/ui/gui/psppire-keypad.c:378 #, fuzzy #| msgid "Fraction less than" msgid "is no less than" msgstr "低于下列值的比例" #: src/ui/gui/psppire-keypad.c:382 #, fuzzy #| msgid "Fraction greater than" msgid "is no greater than" msgstr "高于下列值的比例" #: src/ui/gui/psppire-keypad.c:386 #, fuzzy #| msgid "Does not assume equal" msgid "is not equal to" msgstr "不假设方差相同" #: src/ui/gui/psppire-keypad.c:390 msgid "is equal to" msgstr "" #: src/ui/gui/psppire-keypad.c:400 msgid "and" msgstr "" #: src/ui/gui/psppire-keypad.c:404 #, fuzzy #| msgid "Corr" msgid "or" msgstr "相关系数" #: src/ui/gui/psppire-keypad.c:408 #, fuzzy #| msgid "note" msgid "not" msgstr "提示" #: src/ui/gui/psppire-means-layer.c:95 #, c-format msgid "Layer %d of %d" msgstr "层%d，位于%d内" #: src/ui/gui/psppire-means-layer.c:169 msgid "Forward" msgstr "下一步" #: src/ui/gui/psppire-means-layer.c:170 msgid "Back" msgstr "上一步" #: src/ui/gui/psppire-text-file.c:57 #, c-format msgid "Could not open `%s'" msgstr "无法打开`%s'" #: src/ui/gui/psppire-text-file.c:73 #, c-format msgid "Error reading `%s': %s" msgstr "读取`%s'时出错: %s" #: src/ui/gui/psppire-text-file.c:76 #, c-format msgid "Failed to read `%s', because it contains a line over %d bytes long and therefore appears not to be a text file." msgstr "读取`%s'失败，文件可能不是一个文本文件，因其中包含一行长度超过%d字节。" #: src/ui/gui/psppire-text-file.c:98 #, c-format msgid "`%s' is empty." msgstr "`%s'为空。" #: src/ui/gui/psppire-val-chooser.c:254 msgid "through" msgstr "通过" #: src/ui/gui/psppire-val-chooser.c:287 msgid "_Value:" msgstr "值(_V)：" #: src/ui/gui/psppire-val-chooser.c:288 msgid "_System Missing" msgstr "系统缺失值(_S)" #: src/ui/gui/psppire-val-chooser.c:289 msgid "System _or User Missing" msgstr "系统或用户指定缺失值(_o)" #: src/ui/gui/psppire-val-chooser.c:290 msgid "_Range:" msgstr "范围(_R)：" #: src/ui/gui/psppire-val-chooser.c:291 msgid "Range, _LOWEST thru value" msgstr "范围，最低(_L)到值" #: src/ui/gui/psppire-val-chooser.c:292 msgid "Range, value thru _HIGHEST" msgstr "范围，值到最高(_H)" #: src/ui/gui/psppire-val-chooser.c:293 msgid "_All other values" msgstr "所有其他值(_A)" #: src/ui/gui/psppire-var-view.c:153 #, c-format msgid "Var%d" msgstr "Var%d" #: src/ui/gui/psppire-var-sheet-header.c:64 #, fuzzy #| msgid "Decimals" msgid "Decimal" msgstr "小数位数" #: src/ui/gui/psppire-var-sheet-header.c:79 msgid "Align" msgstr "对齐" #: src/ui/gui/psppire-var-sheet-header.c:82 msgid "Measure" msgstr "衡量" #: src/ui/gui/psppire-variable-sheet.c:420 #, c-format msgid "{%s, %s}..." msgstr "{%s, %s}..." #: src/ui/source-init-opts.c:72 #, c-format msgid "Algorithm must be either `%s' or `%s'." msgstr "算法必须为`%s' 或 `%s'。" #: src/ui/source-init-opts.c:97 #, c-format msgid "Syntax must be either `%s' or `%s'." msgstr "语法必须为`%s' 或 `%s'。" #: src/ui/terminal/main.c:148 msgid "Error encountered while ERROR=STOP is effective." msgstr "设定了ERROR=STOP，有错误发生。" #: src/ui/terminal/main.c:155 msgid "Stopping syntax file processing here to avoid a cascade of dependent command failures." msgstr "停止语法文件处理以避免相关指令产生连锁错误。" #: src/ui/terminal/terminal-opts.c:150 #, fuzzy, c-format #| msgid "" #| "PSPP, a program for statistical analysis of sampled data.\n" #| "Usage: %s [OPTION]... FILE...\n" #| "\n" #| "Arguments to long options also apply to equivalent short options.\n" #| "\n" #| "Output options:\n" #| " -o, --output=FILE output to FILE, default format from FILE's name\n" #| " -O format=FORMAT override format for previous -o\n" #| " -O OPTION=VALUE set output option to customize previous -o\n" #| " -O device={terminal|listing} override device type for previous -o\n" #| " -e, --error-file=FILE append errors, warnings, and notes to FILE\n" #| " --no-output disable default output driver\n" #| "Supported output formats: %s\n" #| "\n" #| "Language options:\n" #| " -I, --include=DIR append DIR to search path\n" #| " -I-, --no-include clear search path\n" #| " -r, --no-statrc disable running rc file at startup\n" #| " -a, --algorithm={compatible|enhanced}\n" #| " set to `compatible' if you want output\n" #| " calculated from broken algorithms\n" #| " -x, --syntax={compatible|enhanced}\n" #| " set to `compatible' to disable PSPP extensions\n" #| " -b, --batch interpret syntax in batch mode\n" #| " -i, --interactive interpret syntax in interactive mode\n" #| " --syntax-encoding=ENCODING specify encoding for syntax files\n" #| " -s, --safer don't allow some unsafe operations\n" #| "Default search path: %s\n" #| "\n" #| "Informative output:\n" #| " -h, --help display this help and exit\n" #| " -V, --version output version information and exit\n" #| "\n" #| "Non-option arguments are interpreted as syntax files to execute.\n" msgid "" "PSPP, a program for statistical analysis of sampled data.\n" "Usage: %s [OPTION]... FILE...\n" "\n" "Arguments to long options also apply to equivalent short options.\n" "\n" "Output options:\n" " -o, --output=FILE output to FILE, default format from FILE's name\n" " -O format=FORMAT override format for previous -o\n" " -O OPTION=VALUE set output option to customize previous -o\n" " -O device={terminal|listing} override device type for previous -o\n" " -e, --error-file=FILE append errors, warnings, and notes to FILE\n" " --no-output disable default output driver\n" " --table-look=FILE use output style read from FILE\n" "Supported output formats: %s\n" "\n" "Language options:\n" " -I, --include=DIR append DIR to search path\n" " -I-, --no-include clear search path\n" " -r, --no-statrc disable running rc file at startup\n" " -a, --algorithm={compatible|enhanced}\n" " set to `compatible' if you want output\n" " calculated from broken algorithms\n" " -x, --syntax={compatible|enhanced}\n" " set to `compatible' to disable PSPP extensions\n" " -b, --batch interpret syntax in batch mode\n" " -i, --interactive interpret syntax in interactive mode\n" " --syntax-encoding=ENCODING specify encoding for syntax files\n" " -s, --safer don't allow some unsafe operations\n" "Default search path: %s\n" "\n" "Informative output:\n" " -h, --help display this help and exit\n" " -V, --version output version information and exit\n" "\n" "Non-option arguments are interpreted as syntax files to execute.\n" msgstr "" "PSPP，样本数据统计分析软件。\n" "用法：%s [选项]... 文件名...\n" "\n" "选项有长、短格式，作用相同。\n" "\n" "输出选项：\n" " -o, --output=文件名 输出到文件，格式取决于文件扩展名\n" " -O format=格式名称 覆盖之前选项-O指定的格式\n" " -O OPTION=值 \t 调整之前-o设置的选项\n" " -O device={terminal|listing} 调整之前-o设置的设备类型\n" " -e, --error-file=文件名 将错误、警告和注释追加到文件\n" " --no-output 禁用默认输出\n" "可选的输出格式: %s\n" "\n" "语言选项:\n" " -I, --include=路径 将\"路径\"追加到搜索路径\n" " -I-, --no-include 清空搜索路径\n" " -r, --no-statrc 启动时不运行rc文件\n" " -a, --algorithm={compatible|enhanced}\n" " 设置为`compatible'以输出包含分组算法结果\n" " -x, --syntax={compatible|enhanced}\n" " 设置为`compatible'以禁用PSPP扩展名\n" " -b, --batch 设置语法解释为批处理模式\n" " -i, --interactive 设置语法解释为互动模式\n" " --syntax-encoding=编码 指定语法文件的编码\n" " -s, --safer 禁止不安全的操作\n" "默认搜索路径: %s\n" "\n" "帮助及版本信息:\n" " -h, --help 显示帮助后退出\n" " -V, --version 显示版本信息后退出\n" "\n" "没有任何选项则启动以执行语法文件。\n" #: src/ui/gui/find-dialog.c:662 #, c-format msgid "Bad regular expression: %s" msgstr "正则表达式错误：%s" #: src/ui/gui/help-menu.c:165 msgid "A program for the analysis of sampled data" msgstr "样本数据分析软件" #. TRANSLATORS: Do not translate this string. Instead, put the names of the people #. who have helped in the translation. #: src/ui/gui/help-menu.c:175 msgid "translator-credits" msgstr "贵州师范大学生命科学学院选修Shulin Yang讲授的《生物统计学》的同学们。" #: src/ui/gui/help-menu.c:227 #, c-format msgid "Help path conversion error: %s" msgstr "帮助路径转换错误：%s" #: src/ui/gui/help-menu.c:249 #, fuzzy, c-format #| msgid "Cannot open reference manual via yelp: %s. Cannot open via html: %s with uri: %s The PSSP manual is also available at %s" msgid "Cannot open via html: %s with uri: %s The PSSP manual is also available at %s" msgstr "无法用yelp: %s打开使用手册。无法打开html: %s (使用uri为：%s)。PSPP用户手册还可以由%s 得到" #: src/ui/gui/help-menu.c:270 msgid "_Help" msgstr "帮助(_H)" #: src/ui/gui/help-menu.c:273 msgid "_About" msgstr "关于(_A)" #: src/ui/gui/help-menu.c:274 #, fuzzy #| msgid "_Display Data File Information" msgid "_System Information" msgstr "显示数据文件信息(_D)" #: src/ui/gui/help-menu.c:275 msgid "_Reference Manual" msgstr "使用手册(_R)" #: src/ui/gui/main.c:182 msgid "PSPP runs best on free platforms such as GNU and GNU/Linux. This computer is running a non-free operating system, so some features might work sub-optimally. For best results, use a free system instead." msgstr "" #: src/ui/gui/main.c:184 msgid "Right click on variable lists to change between viewing the variables' names and their labels." msgstr "" #: src/ui/gui/main.c:185 msgid "Click \"Paste\" instead of \"OK\" when running procedures. This allows you to edit your commands before running them and you have better control over your work." msgstr "" #: src/ui/gui/main.c:186 msgid "Directly import your spreadsheets using the \"File | Import Data\" menu." msgstr "" #: src/ui/gui/main.c:187 msgid "For an easy way to convert string variables into numerically encoded variables, use \"Automatic Recode\" which preserves the variable names as labels." msgstr "" #: src/ui/gui/main.c:188 msgid "When browsing large data sets, use \"Windows | Split\" to see both ends of the data in the same view." msgstr "" #: src/ui/gui/main.c:189 msgid "Export your reports to ODT format for easy editing with the Libreoffice.org suite." msgstr "" #: src/ui/gui/main.c:190 msgid "Use \"Edit | Options\" to have your Output window automatically appear when statistics are generated." msgstr "" #: src/ui/gui/main.c:191 msgid "To easily reorder your variables, drag and drop them in the Variable View or the Data View." msgstr "" #: src/ui/gui/main.c:208 msgid "Psppire User Hint" msgstr "" #: src/ui/gui/main.c:216 msgid "_Next Tip" msgstr "" #: src/ui/gui/main.c:219 src/ui/gui/psppire-data-window.c:1324 #: src/ui/gui/output-window.ui:82 #, fuzzy #| msgid "Close" msgid "_Close" msgstr "关闭" #: src/ui/gui/main.c:235 msgid "_Show tips at startup" msgstr "" #: src/ui/gui/main.c:411 msgid "Psppire: Fatal Error" msgstr "" #: src/ui/gui/main.c:416 #, c-format msgid "You have discovered a bug in PSPP. Please report this to %s including all of the following information, and a description of what you were doing when this happened." msgstr "" #: src/ui/gui/main.c:504 msgid "Show version information and exit" msgstr "显示版本信息并退出" #: src/ui/gui/main.c:531 msgid "Do not display the splash screen" msgstr "不显示欢迎屏幕" #: src/ui/gui/main.c:533 msgid "Do not attempt single instance negotiation" msgstr "不以单实例模式运行" #: src/ui/gui/missing-val-dialog.c:218 msgid "The maximum length of a missing value for a string variable is 8 in UTF-8." msgstr "UTF-8编码下字串变量缺失值的最大长度为8。" #: src/ui/gui/missing-val-dialog.c:269 msgid "At least one value must be specified" msgstr "至少指定一个值。" #: src/ui/gui/missing-val-dialog.c:299 msgid "Incorrect range specification" msgstr "指定的区域不正确" #: src/ui/gui/psppire-data-editor.c:380 #, fuzzy, c-format #| msgid "%s: %s" msgid "%d : %s" msgstr "%s: %s" #: src/ui/gui/psppire-data-editor.c:391 #, c-format msgid "%'d case" msgid_plural "%'d cases" msgstr[0] "%'d个个案" #: src/ui/gui/psppire-data-editor.c:396 #, c-format msgid "%'d variable" msgid_plural "%'d variables" msgstr[0] "%'d个变量" #: src/ui/gui/psppire-data-editor.c:485 msgid "Case" msgstr "个案" #: src/ui/gui/psppire-data-editor.c:495 msgid "Data View" msgstr "数据视图" #: src/ui/gui/psppire-data-editor.c:505 msgid "Variable View" msgstr "变量视图" #: src/ui/gui/psppire-data-window.c:176 msgid "Transformations Pending" msgstr "转换未完成" #: src/ui/gui/psppire-data-window.c:192 msgid "Filter off" msgstr "过滤器关闭" #: src/ui/gui/psppire-data-window.c:204 #, c-format msgid "Filter by %s" msgstr "通过%s过滤" #: src/ui/gui/psppire-data-window.c:225 msgid "No Split" msgstr "不拆分" #: src/ui/gui/psppire-data-window.c:234 msgid "Split by " msgstr "拆分" #: src/ui/gui/psppire-data-window.c:262 msgid "Weights off" msgstr "无权重" #: src/ui/gui/psppire-data-window.c:274 #, c-format msgid "Weight by %s" msgstr "通过%s加权" #: src/ui/gui/psppire-data-window.c:519 #: src/ui/gui/psppire-import-assistant.c:370 #: src/ui/gui/psppire-syntax-window.c:682 src/ui/gui/psppire-window.c:663 msgid "All Files" msgstr "所有文件" #: src/ui/gui/psppire-data-window.c:536 msgid "System File" msgstr "系统文件" #: src/ui/gui/psppire-data-window.c:543 msgid "Compressed System File" msgstr "压缩过的系统文件" #: src/ui/gui/psppire-data-window.c:549 msgid "Portable File" msgstr "便携格式文件" #: src/ui/gui/psppire-data-window.c:552 msgid "Format:" msgstr "格式：" #: src/ui/gui/psppire-data-window.c:616 msgid "Delete Existing Dataset?" msgstr "删除现存数据集？" #: src/ui/gui/psppire-data-window.c:620 #, c-format msgid "Renaming \"%s\" to \"%s\" will destroy the existing dataset named \"%s\". Are you sure that you want to do this?" msgstr "将\"%s\" 重命名为 \"%s\"将破坏已有数据集\"%s\"。是否继续？" #: src/ui/gui/psppire-data-window.c:626 msgid "Delete" msgstr "删除" #: src/ui/gui/psppire-data-window.c:648 #, c-format msgid "Please enter a new name for dataset \"%s\":" msgstr "请给数据集\"%s\"输入新名称：" #: src/ui/gui/psppire-data-window.c:650 msgid "Rename Dataset" msgstr "重命名数据集" #: src/ui/gui/psppire-data-window.c:1207 src/ui/gui/output-window.ui:68 #: src/ui/gui/syntax-editor.ui:22 msgid "_File" msgstr "文件(_F)" #: src/ui/gui/psppire-data-window.c:1211 src/ui/gui/syntax-editor.ui:25 msgid "_New" msgstr "新建(_N)" #: src/ui/gui/psppire-data-window.c:1218 msgid "_Syntax" msgstr "语法文件(_S)" #: src/ui/gui/psppire-data-window.c:1221 src/ui/gui/data-editor.ui:177 #: src/ui/gui/data-editor.ui:189 msgid "_Data" msgstr "数据文件(_D)" #: src/ui/gui/psppire-data-window.c:1228 src/ui/gui/syntax-editor.ui:36 msgid "_Open" msgstr "打开(_O)" #: src/ui/gui/psppire-data-window.c:1231 msgid "_Import Data..." msgstr "导入数据(I)..." #: src/ui/gui/psppire-data-window.c:1239 src/ui/gui/logistic.ui:261 #: src/ui/gui/regression.ui:65 msgid "_Save..." msgstr "保存(_S)" #: src/ui/gui/psppire-data-window.c:1242 msgid "Save _As..." msgstr "另存为(_A)..." #: src/ui/gui/psppire-data-window.c:1245 msgid "_Rename Dataset..." msgstr "重命名数据集(_R)..." #: src/ui/gui/psppire-data-window.c:1256 msgid "_Display Data File Information" msgstr "显示数据文件信息(_D)" #: src/ui/gui/psppire-data-window.c:1263 msgid "Working File" msgstr "工作文件" #: src/ui/gui/psppire-data-window.c:1265 msgid "_External File..." msgstr "外部文件(_E)..." #: src/ui/gui/psppire-data-window.c:1275 msgid "_Recently Used Data" msgstr "最近打开过的数据(_R)" #: src/ui/gui/psppire-data-window.c:1276 msgid "Recently Used _Files" msgstr "最近打开过的文件(_F)" #: src/ui/gui/psppire-data-window.c:1331 src/ui/gui/output-window.ui:87 #: src/ui/gui/syntax-editor.ui:59 msgid "_Quit" msgstr "退出(_Q)" #: src/ui/gui/psppire-data-window.c:1349 src/ui/gui/output-window.ui:94 #: src/ui/gui/syntax-editor.ui:66 msgid "_Edit" msgstr "编辑(_E)" #: src/ui/gui/psppire-data-window.c:1355 msgid "_Go To Variable..." msgstr "转到变量(_G)..." #: src/ui/gui/psppire-data-window.c:1356 msgid "_Go To Case..." msgstr "转到个案(_G)..." #: src/ui/gui/psppire-data-window.c:1380 src/ui/gui/syntax-editor.ui:69 msgid "Cu_t" msgstr "剪切(_t)" #: src/ui/gui/psppire-data-window.c:1389 src/ui/gui/output-window.ui:101 #: src/ui/gui/syntax-editor.ui:74 msgid "_Copy" msgstr "拷贝(_C)" #: src/ui/gui/psppire-data-window.c:1396 src/ui/gui/syntax-editor.ui:79 msgid "_Paste" msgstr "粘贴(_P)" #: src/ui/gui/psppire-data-window.c:1403 msgid "Clear _Variables" msgstr "清除变量(_V)" #: src/ui/gui/psppire-data-window.c:1417 msgid "_Find..." msgstr "查找(_F)" #: src/ui/gui/psppire-data-window.c:1423 src/ui/gui/logistic.ui:246 msgid "_Options..." msgstr "选项(_O)..." #: src/ui/gui/psppire-data-window.c:1699 msgid "Jump to variable" msgstr "跳转到变量" #: src/ui/gui/psppire-data-window.c:1712 msgid "Jump to a case in the data sheet" msgstr "跳转到数据表中的个案" #: src/ui/gui/psppire-data-window.c:1726 msgid "Search for values in the data" msgstr "在数据中搜索值" #: src/ui/gui/psppire-data-window.c:1738 msgid "Create a new case at the current position" msgstr "在当前位置创建个案" #: src/ui/gui/psppire-data-window.c:1750 msgid "Create a new variable at the current position" msgstr "在当前位置创建变量" #: src/ui/gui/psppire-data-window.c:1764 msgid "Split the active dataset" msgstr "分割当前数据集" #: src/ui/gui/psppire-data-window.c:1776 msgid "Weight cases by variable" msgstr "使用变量对个案加权" #: src/ui/gui/psppire-data-window.c:1787 msgid "Show/hide value labels" msgstr "显示/隐藏值标签" #: src/ui/gui/psppire-data-window.c:1927 msgid "Data Editor" msgstr "数据编辑器" #: src/ui/gui/psppire-encoding-selector.c:140 msgid "Automatically Detect" msgstr "自动检测" #: src/ui/gui/psppire-encoding-selector.c:147 msgid "Locale Encoding" msgstr "语言环境编码" #: src/ui/gui/psppire-encoding-selector.c:177 msgid "Character Encoding: " msgstr "字符编码：" #: src/ui/gui/psppire-import-assistant.c:375 msgid "Text Files" msgstr "文本文件" #: src/ui/gui/psppire-import-assistant.c:380 msgid "Text (*.txt) Files" msgstr "文本文件(*.txt)" #: src/ui/gui/psppire-import-assistant.c:386 msgid "Plain Text (ASCII) Files" msgstr "纯文本(ASCII)文件" #: src/ui/gui/psppire-import-assistant.c:391 msgid "Comma Separated Value Files" msgstr "逗号分隔值文件" #: src/ui/gui/psppire-import-assistant.c:398 msgid "Tab Separated Value Files" msgstr "制表符分隔值的文件" #: src/ui/gui/psppire-import-assistant.c:403 msgid "Gnumeric Spreadsheet Files" msgstr "Gnumeric工作表文件" #: src/ui/gui/psppire-import-assistant.c:408 msgid "OpenDocument Spreadsheet Files" msgstr "OpenDocument工作表文件" #: src/ui/gui/psppire-import-assistant.c:413 msgid "All Spreadsheet Files" msgstr "所有工作表文件" #: src/ui/gui/psppire-import-assistant.c:422 msgid "Select File to Import" msgstr "选择文件以导入" #: src/ui/gui/psppire-import-assistant.c:461 msgid "Importing Delimited Text Data" msgstr "导入分隔符分隔的文本数据" #: src/ui/gui/psppire-import-assistant.c:544 msgid "Adjust Variable Formats" msgstr "调整变量格式" #: src/ui/gui/psppire-import-spreadsheet.c:385 msgid "Importing Spreadsheet Data" msgstr "从工作表导入数据" #: src/ui/gui/psppire-import-textfile.c:117 msgid "line" msgstr "" #: src/ui/gui/psppire-import-textfile.c:127 msgid "var" msgstr "var" #: src/ui/gui/psppire-import-textfile.c:251 msgid "Select the First Line" msgstr "选择第一行" #: src/ui/gui/psppire-import-textfile.c:263 msgid "Line" msgstr "行" #: src/ui/gui/psppire-import-textfile.c:322 msgid "" "This assistant will guide you through the process of importing data into PSPP from a text file with one line per case, in which fields are separated by tabs, commas, or other delimiters.\n" "\n" msgstr "" "本帮助将指导从文本文件中导入数据到PSPP，每次导入一行作为一个个案，行中字段以制表符、逗号或其他分隔符隔开。\n" "\n" #: src/ui/gui/psppire-import-textfile.c:332 #, c-format msgid "The selected file contains %'lu line of text. " msgid_plural "The selected file contains %'lu lines of text. " msgstr[0] "选中的文件含有%'lu行文本。" #: src/ui/gui/psppire-import-textfile.c:341 #, c-format msgid "The selected file contains approximately %'lu line of text. " msgid_plural "The selected file contains approximately %'lu lines of text. " msgstr[0] "选中的文件约含有%'lu行文本。" #: src/ui/gui/psppire-import-textfile.c:347 #, c-format msgid "Only the first %zu line of the file will be shown for preview purposes in the following screens. " msgid_plural "Only the first %zu lines of the file will be shown for preview purposes in the following screens. " msgstr[0] "接下来预览显示仅显示文件最开始的%zu行。" #: src/ui/gui/psppire-import-textfile.c:356 msgid "You may choose below how much of the file should actually be imported." msgstr "您可在下面选择导入多少文件内容。" #: src/ui/gui/psppire-import-textfile.c:365 #, c-format msgid "Only the first %4d cases" msgstr "仅前%4d个个案" #: src/ui/gui/psppire-import-textfile.c:376 #, c-format msgid "Only the first %3d %% of file (approximately)" msgstr "仅文件的前%3d %%(约数)" #: src/ui/gui/psppire-import-textfile.c:404 msgid "Select the Lines to Import" msgstr "选择数据行以导入" #: src/ui/gui/psppire-import-textfile.c:557 msgid "Choose Separators" msgstr "选择分隔符" #: src/ui/gui/psppire-output-view.c:599 msgid "failed to create temporary directory during clipboard operation" msgstr "剪贴版操作时创建临时目录失败" #: src/ui/gui/psppire-output-window.c:237 msgid "Infer file type from extension" msgstr "从扩展名推断文件类型" #: src/ui/gui/psppire-output-window.c:238 msgid "SPSS Viewer (*.spv)" msgstr "" #: src/ui/gui/psppire-output-window.c:239 msgid "PDF (*.pdf)" msgstr "PDF (*.pdf)" #: src/ui/gui/psppire-output-window.c:240 msgid "HTML (*.html)" msgstr "HTML (*.html)" #: src/ui/gui/psppire-output-window.c:241 msgid "OpenDocument (*.odt)" msgstr "OpenDocument (*.odt)" #: src/ui/gui/psppire-output-window.c:242 msgid "Text (*.txt)" msgstr "文本文件(*.txt)" #: src/ui/gui/psppire-output-window.c:243 msgid "Text [plain] (*.txt)" msgstr "纯文本文件(*.txt)" #: src/ui/gui/psppire-output-window.c:244 msgid "PostScript (*.ps)" msgstr "PostScript (*.ps)" #: src/ui/gui/psppire-output-window.c:245 msgid "Comma-Separated Values (*.csv)" msgstr "逗号分隔值文件(*.csv)" #: src/ui/gui/psppire-output-window.c:246 #, fuzzy #| msgid "Portable Files (*.por) " msgid "Portable Network Graphics (*.png)" msgstr "便携格式文件(*.por)" #: src/ui/gui/psppire-output-window.c:247 msgid "Scalable Vector Graphics (*.svg)" msgstr "" #: src/ui/gui/psppire-output-window.c:311 msgid "Export Output" msgstr "导出输出结果" #: src/ui/gui/psppire-output-window.c:520 msgid "Output Viewer" msgstr "输出窗口" #. TRANSLATORS: This is part of a filename. Please avoid whitespace. #: src/ui/gui/psppire-syntax-window.c:207 msgid "Untitled" msgstr "" #: src/ui/gui/psppire-syntax-window.c:645 #, c-format msgid "Saved file `%s'" msgstr "保存文件`%s'" #: src/ui/gui/psppire-syntax-window.c:666 msgid "Save Syntax" msgstr "保存语法" #: src/ui/gui/psppire-syntax-window.c:676 src/ui/gui/psppire-window.c:651 msgid "Syntax Files (*.sps) " msgstr "语法文件(*.sps)" #: src/ui/gui/psppire-syntax-window.c:1044 msgid "Syntax Editor" msgstr "语法编辑器" #: src/ui/gui/psppire-syntax-window.c:1064 #, c-format msgid "Cannot load syntax file `%s'" msgstr "无法载入语法文件`%s'" #: src/ui/gui/psppire-window.c:424 #, c-format msgid "Save the changes to `%s' before closing?" msgstr "关闭前将改动保存到`%s'？" #: src/ui/gui/psppire-window.c:431 #, c-format msgid "If you don't save, changes from the last %ld seconds will be permanently lost." msgstr "如果选择不保存，之前%ld秒内作的改动将永久丢失。" #: src/ui/gui/psppire-window.c:435 msgid "Close _without saving" msgstr "不保存而关闭(_w)" #: src/ui/gui/psppire-window.c:619 src/ui/gui/psppire-window.c:623 msgid "Open" msgstr "打开" #: src/ui/gui/psppire-window.c:628 msgid "Data and Syntax Files" msgstr "数据和语法文件" #: src/ui/gui/psppire-window.c:640 msgid "System Files (*.sav, *.zsav)" msgstr "系统文件(*.sav, *.zsav)" #: src/ui/gui/psppire-window.c:657 #, fuzzy #| msgid "Syntax Files (*.sps) " msgid "Output Files (*.spv) " msgstr "语法文件(*.sps)" #: src/ui/gui/t-test-options.c:65 #, c-format msgid "Con_fidence Interval: %2d %%" msgstr "置信区间：%2d %%" #: src/ui/gui/val-labs-dialog.c:591 #, c-format msgid "%s = `%s'" msgstr "%s = `%s'" #: src/ui/gui/var-type-dialog.c:544 #, fuzzy #| msgid "Compute Variable: Type and Label" msgid "Variable Type and Format" msgstr "计算变量：类型和标签" #: src/ui/gui/windows-menu.c:92 msgid "_Minimize all Windows" msgstr "最小化所有窗口(_M)" #: src/ui/gui/windows-menu.c:100 msgid "_Split" msgstr "拆分(_S)" #: src/ui/gui/windows-menu.c:132 msgid "_Windows" msgstr "窗口(_W)" #: utilities/pspp-convert.c:68 #, c-format msgid "%s argument must be a single character" msgstr "" #: utilities/pspp-convert.c:266 msgid "exactly two non-option arguments are required; use --help for help" msgstr "必须使用正好两个非选项参数；使用--help查看帮助" #: utilities/pspp-convert.c:277 #, c-format msgid "%s: cannot guess output format (use -O option)" msgstr "%s：不能猜测输出格式类型(使用-O选项)" #: utilities/pspp-convert.c:346 #, c-format msgid "%s: unknown output format (use -O option)" msgstr "%s：未知的输出格式(使用-O选项)" #: utilities/pspp-convert.c:365 #, c-format msgid "%s: error reading input file" msgstr "%s：读取输入文件错误" #: utilities/pspp-convert.c:367 #, c-format msgid "%s: error writing output file" msgstr "%s：写入输出文件错误" #: utilities/pspp-convert.c:414 #, fuzzy, c-format #| msgid "%s: error opening output file" msgid "%s: error opening password file" msgstr "%s：打开输出文件出错" #: utilities/pspp-convert.c:430 #, fuzzy, c-format #| msgid "%s: error reading input file" msgid "" "\n" "%s: password not in file" msgstr "%s：读取输入文件错误" #: utilities/pspp-convert.c:467 #, fuzzy, c-format #| msgid "`%c' is not a valid hex digit" msgid "%s: '%c' is not in alphabet" msgstr "`%c'不是有效的16进制数字" #: utilities/pspp-convert.c:531 msgid "sorry, wrong password" msgstr "抱歉，密码错误" #: utilities/pspp-output.c:526 #, c-format msgid "%s: invalid XPath expression" msgstr "" #: utilities/pspp-output.c:825 msgid "missing command name (use --help for help)" msgstr "" #: utilities/pspp-output.c:829 #, c-format msgid "unknown command \"%s\" (use --help for help)" msgstr "" #: utilities/pspp-output.c:837 #, c-format msgid "\"%s\" command takes exactly %d argument" msgid_plural "\"%s\" command takes exactly %d arguments" msgstr[0] "" #: utilities/pspp-output.c:844 #, fuzzy, c-format #| msgid "%s requires at least %d valid arguments in list." msgid "\"%s\" command requires at least %d argument" msgid_plural "\"%s\" command requires at least %d arguments" msgstr[0] "%s要求至少%d个有效参数。" #: utilities/pspp-output.c:851 #, fuzzy, c-format #| msgid "%s requires at least %d valid arguments in list." msgid "\"%s\" command requires between %d and %d arguments" msgstr "%s要求至少%d个有效参数。" #: utilities/pspp-output.c:893 msgid "The following object classes are supported:" msgstr "" #: utilities/pspp-output.c:902 #, c-format msgid "unknown object class \"%s\" (use --select=help for help)" msgstr "" #: src/ui/gui/aggregate.ui:20 msgid "Aggregate Data" msgstr "数据汇总" #: src/ui/gui/aggregate.ui:125 msgid "_Break variable(s)" msgstr "分组变量(_B)" #: src/ui/gui/aggregate.ui:177 msgid "Variable Name: " msgstr "变量名称：" #: src/ui/gui/aggregate.ui:213 msgid "Variable Label: " msgstr "变量标签：" #: src/ui/gui/aggregate.ui:250 msgid "Function: " msgstr "函数" #: src/ui/gui/aggregate.ui:324 msgid "Argument 1: " msgstr "参数1：" #: src/ui/gui/aggregate.ui:361 msgid "Argument 2: " msgstr "参数2：" #: src/ui/gui/aggregate.ui:415 msgid "Aggregated variables" msgstr "汇总后的变量" #: src/ui/gui/aggregate.ui:456 msgid "_Add aggregated variables to the active dataset" msgstr "将汇总后产生的变量添加到活动数据集(_A)" #: src/ui/gui/aggregate.ui:473 msgid "_Replace the current dataset with the aggregated variables" msgstr "用汇总后的变量更换当前数据集(_R)" #: src/ui/gui/aggregate.ui:491 msgid "_Write a new data file containing only the aggregated variables" msgstr "将汇总后的变量写入新文件(_W)" #: src/ui/gui/aggregate.ui:531 msgid "label" msgstr "标签" #: src/ui/gui/aggregate.ui:580 msgid "File is _already sorted on break variable(s)" msgstr "文件中分组变量已排序(_a)" #: src/ui/gui/aggregate.ui:596 msgid "Sort file before a_ggregating" msgstr "会计前先排序(_g)" #: src/ui/gui/aggregate.ui:617 msgid "Options for very large datasets" msgstr "超大数据集选项" #: src/ui/gui/autorecode.ui:24 msgid "Automatic Recode" msgstr "自动重编码" #: src/ui/gui/autorecode.ui:120 msgid "Variable -> New Name" msgstr "变量 -> 新名称" #: src/ui/gui/autorecode.ui:145 msgid "_Lowest value" msgstr "最低值(_L)" #: src/ui/gui/autorecode.ui:163 msgid "_Highest value" msgstr "最高值(_H)" #: src/ui/gui/autorecode.ui:185 msgid "Recode starting from" msgstr "重编码始于" #: src/ui/gui/autorecode.ui:204 msgid "_New Name" msgstr "新名称(_N)" #: src/ui/gui/autorecode.ui:227 msgid "_Add New Name" msgstr "添加新名称(_A)" #: src/ui/gui/autorecode.ui:285 msgid "_Use the same recoding scheme for all variables" msgstr "对所有变量使用相同重编码规则(_U)" #: src/ui/gui/autorecode.ui:301 msgid "Treat _blank string values as missing" msgstr "空白字符串当缺失值处理(_b)" #: src/ui/gui/binomial.ui:86 msgid "_Test Variable List:" msgstr "检验变量列表(_T)：" #: src/ui/gui/binomial.ui:160 src/ui/gui/chi-square.ui:281 msgid "_Get from data" msgstr "从数据获取(_G)" #: src/ui/gui/binomial.ui:181 src/ui/gui/indep-samples.ui:150 msgid "_Cut point:" msgstr "分割点(_C)：" #: src/ui/gui/binomial.ui:225 msgid "Define Dichotomy" msgstr "设定二分变量" #: src/ui/gui/binomial.ui:245 msgid "Test _Proportion:" msgstr "检验比例(_P)：" #: src/ui/gui/compute.ui:28 msgid "Compute Variable: Type and Label" msgstr "计算变量：类型和标签" #: src/ui/gui/compute.ui:67 msgid "Use _expression as label" msgstr "使用表达式作标签(_e)" #: src/ui/gui/compute.ui:90 msgid "_Label:" msgstr "标签(_L)：" #: src/ui/gui/compute.ui:195 msgid "_String" msgstr "字符串(_S)" #: src/ui/gui/compute.ui:288 msgid "_Numeric" msgstr "数字型(_N)" #: src/ui/gui/compute.ui:344 msgid "Compute Variable" msgstr "变量计算" #: src/ui/gui/compute.ui:385 msgid "Target _Variable:" msgstr "目标变量(_V)：" #: src/ui/gui/compute.ui:416 msgid "_Type & Label..." msgstr "类型和标签(_T)..." #: src/ui/gui/compute.ui:473 msgid "=" msgstr "=" #: src/ui/gui/compute.ui:530 msgid "_Numeric Expressions:" msgstr "表达式(_N)" #: src/ui/gui/compute.ui:602 msgid "_Functions:" msgstr "函数(_F)：" #: src/ui/gui/compute.ui:682 msgid "_If..." msgstr "如果(_I)..." #: src/ui/gui/barchart.ui:24 msgid "Barchart" msgstr "条形图" #: src/ui/gui/barchart.ui:112 msgid "Category A_xis:" msgstr "类别轴(_x)" #: src/ui/gui/barchart.ui:140 msgid "_N of cases" msgstr "个案数量(_N)" #: src/ui/gui/barchart.ui:158 msgid "_Cum. n of cases" msgstr "累积个案数量(_C)" #: src/ui/gui/barchart.ui:174 msgid "Other _summary function" msgstr "其他汇总函数(_s)" #: src/ui/gui/barchart.ui:191 msgid "% of c_ases" msgstr "个案数量百分比(_a)" #: src/ui/gui/barchart.ui:207 msgid "C_um. % of cases" msgstr "累积个案数量百分比(_u)" #: src/ui/gui/barchart.ui:270 src/ui/gui/histogram.ui:100 msgid "_Variable:" msgstr "变量(_V)：" #: src/ui/gui/barchart.ui:308 msgid "Bars Represent" msgstr "柱条代表：" #: src/ui/gui/barchart.ui:340 msgid "Category C_luster:" msgstr "类别群(_l)" #: src/ui/gui/correlation.ui:24 msgid "Bivariate Correlations" msgstr "二元相关性" #: src/ui/gui/correlation.ui:148 msgid "Pearso_n" msgstr "Pearso_n" #: src/ui/gui/correlation.ui:164 msgid "_Kendall's tau-b" msgstr "_Kendall's tau-b" #: src/ui/gui/correlation.ui:180 msgid "_Spearman" msgstr "_Spearman" #: src/ui/gui/correlation.ui:200 msgid "Correlation Coefficients" msgstr "相关系数" #: src/ui/gui/correlation.ui:224 msgid "_Two-tailed" msgstr "双尾(_T)" #: src/ui/gui/correlation.ui:241 msgid "One-tai_led" msgstr "单尾(_l)" #: src/ui/gui/correlation.ui:262 msgid "Test of Significance" msgstr "显著度检验" #: src/ui/gui/correlation.ui:275 msgid "_Flag significant correlations" msgstr "标记显著的系数(_F)" #: src/ui/gui/count.ui:24 msgid "Count Occurrences of Values within Cases" msgstr "计数个案中值出现的次数" #: src/ui/gui/count.ui:117 msgid "Numeric _Variables:" msgstr "数字型变量(_V)：" #: src/ui/gui/count.ui:147 msgid "_Target Variable:" msgstr "目的变量(_T)：" #: src/ui/gui/count.ui:178 msgid "Target _Label:" msgstr "目的标签(_L)：" #: src/ui/gui/count.ui:192 msgid "_Define Values..." msgstr "指定值(_D)..." #: src/ui/gui/count.ui:257 msgid "Count Values within Cases: Values to Count" msgstr "个案中值的数量：要计数的值" #: src/ui/gui/count.ui:305 msgid "Values _to Count:" msgstr "要计数的值(_t)：" #: src/ui/gui/comments.ui:25 msgid "Data File Comments" msgstr "数据文件注释" #: src/ui/gui/comments.ui:49 msgid "Comments:" msgstr "注释：" #: src/ui/gui/comments.ui:106 msgid "Display comments in output" msgstr "输出中显示注释" #: src/ui/gui/comments.ui:127 msgid "Column Number: 0" msgstr "字段数量：0" #: src/ui/gui/crosstabs.ui:25 msgid "Crosstabs: Cells" msgstr "交叉表：单元格" #: src/ui/gui/crosstabs.ui:67 msgid "Cell Display" msgstr "单元格显示" #: src/ui/gui/crosstabs.ui:150 msgid "_Rows" msgstr "行(_R)" #: src/ui/gui/crosstabs.ui:195 msgid "_Columns" msgstr "列(_C)" #: src/ui/gui/crosstabs.ui:242 msgid "_Format..." msgstr "格式(_F)..." #: src/ui/gui/crosstabs.ui:256 src/ui/gui/examine.ui:336 msgid "_Statistics..." msgstr "统计量(_S)..." #: src/ui/gui/crosstabs.ui:270 msgid "Ce_lls..." msgstr "单元格(_l)..." #: src/ui/gui/crosstabs.ui:348 msgid "Crosstabs: Format" msgstr "交叉表：格式" #: src/ui/gui/crosstabs.ui:371 msgid "Print tables" msgstr "输出表格" #: src/ui/gui/crosstabs.ui:387 msgid "Pivot" msgstr "旋转" #: src/ui/gui/crosstabs.ui:403 src/ui/gui/sort.ui:157 msgid "Ascending" msgstr "升序" #: src/ui/gui/crosstabs.ui:455 msgid "Crosstabs: Statistics" msgstr "交叉表：统计量" #: src/ui/gui/chi-square.ui:30 msgid "Chi-Square Test" msgstr "卡方检验" #: src/ui/gui/chi-square.ui:82 msgid "All categor_ies equal" msgstr "所有类别相等(_i)" #: src/ui/gui/chi-square.ui:103 msgid "_Values" msgstr "值(_V)" #: src/ui/gui/chi-square.ui:159 msgid "Expected Values:" msgstr "期待值：" #: src/ui/gui/chi-square.ui:204 msgid "Test _Variables" msgstr "检验变量(_V)" #: src/ui/gui/chi-square.ui:298 msgid "Use _specified range" msgstr "指定范围(_s)" #: src/ui/gui/chi-square.ui:323 msgid "_Lower:" msgstr "下限(_L)：" #: src/ui/gui/chi-square.ui:337 msgid "_Upper:" msgstr "上限(_U)：" #: src/ui/gui/chi-square.ui:381 msgid "Expected Range:" msgstr "期待范围：" #: src/ui/gui/descriptives.ui:131 src/ui/gui/factor.ui:801 #: src/ui/gui/recode.ui:641 msgid "_Variables:" msgstr "变量(_V)：" #: src/ui/gui/descriptives.ui:176 msgid "S_tatistics:" msgstr "统计量(_t)：" #: src/ui/gui/descriptives.ui:230 msgid "_Exclude entire case if any selected variable is missing" msgstr "排除有变量缺失的个案(_E)" #: src/ui/gui/descriptives.ui:247 msgid "_Include user-missing data in analysis" msgstr "将用户定义的缺失值包含于数据分析(_I)" #: src/ui/gui/descriptives.ui:264 msgid "Save _Z-scores of selected variables as new variables" msgstr "将选中变量的Z-分数保存为新变量(_Z)" #: src/ui/gui/descriptives.ui:286 msgid "Options:" msgstr "选项：" #: src/ui/gui/examine.ui:21 msgid "Explore" msgstr "数据探索" #: src/ui/gui/examine.ui:68 msgid "_Label Cases by:" msgstr "个案标签(_L)：" #: src/ui/gui/examine.ui:115 msgid "_Factor List:" msgstr "因子列表(_F)：" #: src/ui/gui/examine.ui:162 src/ui/gui/means.ui:126 msgid "_Dependent List:" msgstr "因变量列表(_D)：" #: src/ui/gui/examine.ui:298 msgid "Plots" msgstr "" #: src/ui/gui/examine.ui:366 #, fuzzy #| msgid "_Font..." msgid "Plot..." msgstr "字体(_F)" #: src/ui/gui/examine.ui:413 msgid "Explore: Options" msgstr "数据探索：选项" #: src/ui/gui/examine.ui:440 src/ui/gui/t-test.ui:80 msgid "Exclude cases _listwise" msgstr "去除有缺失值的任何记录(_l)" #: src/ui/gui/examine.ui:457 msgid "Exclude cases _pairwise" msgstr "因、自变量都有缺失值才去除该记录(_p)" #: src/ui/gui/examine.ui:475 msgid "_Report values" msgstr "报告值(_R)" #: src/ui/gui/examine.ui:530 #, fuzzy #| msgid "Explore: Options" msgid "Explore: Plots" msgstr "数据探索：选项" #: src/ui/gui/examine.ui:568 msgid "Factor levels together" msgstr "" #: src/ui/gui/examine.ui:583 #, fuzzy #| msgid "_Dependent List:" msgid "Dependents together" msgstr "因变量列表(_D)：" #: src/ui/gui/examine.ui:617 #, fuzzy #| msgid "Boxplot" msgid "Boxplots" msgstr "箱线图" #: src/ui/gui/examine.ui:635 src/ui/gui/histogram.ui:24 msgid "Histogram" msgstr "直方图" #: src/ui/gui/examine.ui:646 #, fuzzy #| msgid "Descriptives" msgid "Descriptive" msgstr "描述统计" #: src/ui/gui/examine.ui:666 msgid "Normality plots with tests" msgstr "" #: src/ui/gui/examine.ui:706 #, fuzzy #| msgid "Position" msgid "Power estimation" msgstr "位置" #: src/ui/gui/examine.ui:725 #, fuzzy #| msgid "_Transform" msgid "Transformed Power:" msgstr "变换(_T)" #: src/ui/gui/examine.ui:743 msgid "Natural Log" msgstr "" #: src/ui/gui/examine.ui:744 msgid "Cube" msgstr "" #: src/ui/gui/examine.ui:745 #, fuzzy #| msgid "R Square" msgid "Square" msgstr "R平方" #: src/ui/gui/examine.ui:746 #, fuzzy #| msgid "R Square" msgid "Square Root" msgstr "R平方" #: src/ui/gui/examine.ui:747 msgid "Rec. Root" msgstr "" #: src/ui/gui/examine.ui:748 msgid "Reciprocal" msgstr "" #: src/ui/gui/examine.ui:766 #, fuzzy #| msgid "_Transform" msgid "Untransformed" msgstr "变换(_T)" #: src/ui/gui/examine.ui:785 #, fuzzy #| msgid "Spread vs. Level Plot of %s" msgid "Spread vs Level with Levene Test" msgstr "%s展布 vs. 水平图" #: src/ui/gui/examine.ui:823 msgid "Explore: Statistics" msgstr "数据探索：统计量" #: src/ui/gui/examine.ui:845 src/ui/gui/oneway.ui:431 msgid "_Descriptives" msgstr "描述性统计分析(_D)" #: src/ui/gui/examine.ui:861 msgid "_Extremes" msgstr "极值(_E)" #: src/ui/gui/examine.ui:877 msgid "_Percentiles" msgstr "百分位(_P)" #: src/ui/gui/goto-case.ui:31 msgid "Goto Case" msgstr "转到个案" #: src/ui/gui/goto-case.ui:52 msgid "Goto Case Number:" msgstr "根据标号跳转到个案：" #: src/ui/gui/factor.ui:35 msgid "Factor Analysis: Rotation" msgstr "因子分析：旋转" #: src/ui/gui/factor.ui:69 msgid "_None" msgstr "无(_N)" #: src/ui/gui/factor.ui:86 msgid "_Varimax" msgstr "方差最大化旋转(_V)" #: src/ui/gui/factor.ui:103 msgid "_Quartimax" msgstr "四次幂最大化旋转(_Q)" #: src/ui/gui/factor.ui:122 msgid "_Equimax" msgstr "等量最大法(_E)" #: src/ui/gui/factor.ui:145 msgid "Method" msgstr "方法" #: src/ui/gui/factor.ui:158 msgid "_Display rotated solution" msgstr "显示旋转结果(_D)" #: src/ui/gui/factor.ui:180 src/ui/gui/factor.ui:583 msgid "Ma_ximum iterations for convergence:" msgstr "收敛前最大迭代次数(_x)：" #: src/ui/gui/factor.ui:239 src/ui/gui/factor.ui:253 msgid "Principal Components Analysis" msgstr "主成分分析" #: src/ui/gui/factor.ui:244 src/ui/gui/factor.ui:256 msgid "Principal Axis Factoring" msgstr "主轴因素" #: src/ui/gui/factor.ui:262 msgid "Factor Analysis: Extraction" msgstr "因子分析：提取" #: src/ui/gui/factor.ui:291 msgid "_Method: " msgstr "方法(_M)：" #: src/ui/gui/factor.ui:346 msgid "Co_rrelation matrix" msgstr "相关矩阵(_r)" #: src/ui/gui/factor.ui:362 msgid "Co_variance matrix" msgstr "协方差矩阵(_v)" #: src/ui/gui/factor.ui:383 msgid "Analyze" msgstr "分析" #: src/ui/gui/factor.ui:408 msgid "_Unrotated factor solution" msgstr "无旋转因子方案(_U)" #: src/ui/gui/factor.ui:424 msgid "_Scree plot" msgstr "碎石图(_S)" #: src/ui/gui/factor.ui:527 msgid "_Number of factors:" msgstr "因子数量(_N)：" #: src/ui/gui/factor.ui:564 msgid "Extract" msgstr "提取" #: src/ui/gui/factor.ui:641 msgid "Factor Analysis" msgstr "因子分析" #: src/ui/gui/factor.ui:676 src/ui/gui/data-editor.ui:266 msgid "_Descriptives..." msgstr "描述统计(_D)..." #: src/ui/gui/factor.ui:689 msgid "_Extraction..." msgstr "提取(_E)..." #: src/ui/gui/factor.ui:703 msgid "_Rotations..." msgstr "旋转(_R)..." #: src/ui/gui/find.ui:25 msgid "Find Case" msgstr "查找个案" #: src/ui/gui/find.ui:117 msgid "Variable:" msgstr "变量：" #: src/ui/gui/find.ui:157 src/ui/gui/val-labs-dialog.ui:113 msgid "Value:" msgstr "值：" #: src/ui/gui/find.ui:180 msgid "Search value labels" msgstr "查找值标签" #: src/ui/gui/find.ui:210 msgid "Regular expression Match" msgstr "正刚表达式匹配" #: src/ui/gui/find.ui:227 msgid "Search substrings" msgstr "字符串部分匹配" #: src/ui/gui/frequencies.ui:28 msgid "Frequencies: Frequency Tables" msgstr "频率：频率表" #: src/ui/gui/frequencies.ui:66 msgid "_Always" msgstr "总是(_A)" #: src/ui/gui/frequencies.ui:83 msgid "_Never" msgstr "从不(_N)" #: src/ui/gui/frequencies.ui:104 msgid "If no _more than " msgstr "若不超过(_m)" #: src/ui/gui/frequencies.ui:125 src/ui/gui/frequencies.ui:453 msgid "100" msgstr "100" #: src/ui/gui/frequencies.ui:141 msgid "values" msgstr "值" #: src/ui/gui/frequencies.ui:163 msgid "Display frequency tables" msgstr "显示频率表" #: src/ui/gui/frequencies.ui:190 msgid "A_scending value" msgstr "上升的值(_s)" #: src/ui/gui/frequencies.ui:208 msgid "D_escending value" msgstr "下降的值(_e)" #: src/ui/gui/frequencies.ui:226 msgid "Ascending _frequency" msgstr "上升的频率(_f)" #: src/ui/gui/frequencies.ui:244 msgid "Descending f_requency" msgstr "下降的频率(_e)" #: src/ui/gui/frequencies.ui:267 msgid "Order by" msgstr "排序方式" #: src/ui/gui/frequencies.ui:320 msgid "Frequencies: Charts" msgstr "频率：图表" #: src/ui/gui/frequencies.ui:359 msgid "Scale:" msgstr "缩放：" #: src/ui/gui/frequencies.ui:369 msgid "_Frequencies" msgstr "频率(_F）" #: src/ui/gui/frequencies.ui:385 msgid "_Percentages" msgstr "百分比(_P)" #: src/ui/gui/frequencies.ui:408 msgid "Exclude values _below " msgstr "排除小于下值的值(_b)" #: src/ui/gui/frequencies.ui:422 msgid "Exclude values _above " msgstr "排除大于下值的值(_a)" #: src/ui/gui/frequencies.ui:440 src/ui/gui/reliability.ui:226 msgid "0" msgstr "0" #: src/ui/gui/frequencies.ui:468 msgid "Chart Formatting" msgstr "图表格式" #: src/ui/gui/frequencies.ui:493 msgid "Draw _histograms" msgstr "绘制直方图(_h)" #: src/ui/gui/frequencies.ui:509 msgid "Superimpose _normal curve" msgstr "叠加正态曲线(_n)" #: src/ui/gui/frequencies.ui:529 msgid "Histograms" msgstr "直方图" #: src/ui/gui/frequencies.ui:554 msgid "Draw _bar charts" msgstr "绘制条形图(_b)" #: src/ui/gui/frequencies.ui:574 msgid "Bar Charts" msgstr "条形图" #: src/ui/gui/frequencies.ui:599 msgid "Draw _pie charts" msgstr "绘制饼状图(_p)" #: src/ui/gui/frequencies.ui:615 msgid "Include slices for _missing values" msgstr "饼状图中绘制缺失值(_m)" #: src/ui/gui/frequencies.ui:635 msgid "Pie Charts" msgstr "饼状图" #: src/ui/gui/frequencies.ui:727 src/ui/gui/rank.ui:491 msgid "_Variable(s):" msgstr "变量(_V)：" #: src/ui/gui/frequencies.ui:771 msgid "_Statistics:" msgstr "统计量(_S)：" #: src/ui/gui/frequencies.ui:785 msgid "Include _missing values" msgstr "包含缺失值(_m)" #: src/ui/gui/frequencies.ui:807 msgid "Ch_arts..." msgstr "图表(_a)..." #: src/ui/gui/frequencies.ui:822 msgid "Frequency _Tables..." msgstr "频率表(_T)..." #: src/ui/gui/histogram.ui:126 msgid "_Display normal curve" msgstr "显示正态曲线(_D)" #: src/ui/gui/indep-samples.ui:25 src/ui/gui/k-independent.ui:35 msgid "Define Groups" msgstr "定义组" #: src/ui/gui/indep-samples.ui:75 msgid "Group_2 value:" msgstr "第2组(_2)：" #: src/ui/gui/indep-samples.ui:89 msgid "Group_1 value:" msgstr "第1组(_1)：" #: src/ui/gui/indep-samples.ui:190 msgid "_Use specified values:" msgstr "使用指定的值(_U)：" #: src/ui/gui/indep-samples.ui:259 msgid "Independent-Samples T Test" msgstr "独立样本T检验" #: src/ui/gui/indep-samples.ui:319 msgid "_Define Groups..." msgstr "定义组(_D)..." #: src/ui/gui/indep-samples.ui:401 src/ui/gui/t-test.ui:212 msgid "_Test Variable(s):" msgstr "检验变量(_T)" #: src/ui/gui/indep-samples.ui:454 src/ui/gui/k-independent.ui:165 msgid "_Grouping Variable:" msgstr "分组变量(_G)" #: src/ui/gui/k-independent.ui:63 msgid "_Upper limit:" msgstr "上限(_U)：" #: src/ui/gui/k-independent.ui:77 msgid "_Lower limit:" msgstr "下限(_L)：" #: src/ui/gui/k-independent.ui:136 msgid "Tests for Several Independent Samples" msgstr "样本独立性检验" #: src/ui/gui/k-independent.ui:208 src/ui/gui/ks-one-sample.ui:131 msgid "Test _Variable List:" msgstr "检验变量列表(_V)" #: src/ui/gui/k-independent.ui:320 msgid "_Define Groups" msgstr "定义组(_G)" #: src/ui/gui/k-independent.ui:365 msgid "_Kruskal-Wallis H" msgstr "_Kruskal-Wallis H" #: src/ui/gui/k-independent.ui:382 src/ui/gui/runs.ui:140 msgid "_Median" msgstr "中位数(_M)" #: src/ui/gui/k-means.ui:24 msgid "K-Means Cluster Analysis" msgstr "K-均值聚类分析" #: src/ui/gui/k-means.ui:122 msgid "N_umber of Clusters: " msgstr "类群数量(_u):" #: src/ui/gui/k-related.ui:24 msgid "Tests for Several Related Samples" msgstr "相关样本检验" #: src/ui/gui/k-related.ui:113 msgid "_Test Variables:" msgstr "检验变量(_T)：" #: src/ui/gui/k-related.ui:145 msgid "_Friedman" msgstr "_Friedman" #: src/ui/gui/k-related.ui:161 msgid "_Kendall's W" msgstr "_Kendall's W" #: src/ui/gui/k-related.ui:177 msgid "_Cochran's Q" msgstr "_Cochran's Q" #: src/ui/gui/ks-one-sample.ui:163 msgid "_Normal" msgstr "正态分布(_N)" #: src/ui/gui/ks-one-sample.ui:181 msgid "_Poisson" msgstr "泊松分布(_P)" #: src/ui/gui/ks-one-sample.ui:198 msgid "_Uniform" msgstr "均匀分布(_U)" #: src/ui/gui/ks-one-sample.ui:213 msgid "_Exponential" msgstr "指数分布(_E)" #: src/ui/gui/ks-one-sample.ui:232 msgid "Test Distribution" msgstr "检验分布" #: src/ui/gui/logistic.ui:42 msgid "Logistic Regression: Options" msgstr "逻辑斯蒂回归：选项" #: src/ui/gui/logistic.ui:66 msgid "CI for _exp(B): " msgstr "_exp(B)的置信区间：" #: src/ui/gui/logistic.ui:97 msgid "%" msgstr "%" #: src/ui/gui/logistic.ui:146 msgid "Classification cu_toff: " msgstr "分类分割点(_t)：" #: src/ui/gui/logistic.ui:159 msgid "_Maximum Iterations: " msgstr "最大迭代次数(_M)：" #: src/ui/gui/logistic.ui:177 msgid "Include _constant in model" msgstr "模型中包含常量(_c)" #: src/ui/gui/logistic.ui:364 src/ui/gui/regression.ui:185 msgid "_Dependent" msgstr "因变量(_D)" #: src/ui/gui/logistic.ui:412 src/ui/gui/regression.ui:233 msgid "_Independent" msgstr "自变量(_I)" #: src/ui/gui/means.ui:179 msgid "_Independent List:" msgstr "自变量列表(_I)：" #: src/ui/gui/missing-val-dialog.ui:48 msgid "_No missing values" msgstr "不包含缺失值(_N)" #: src/ui/gui/missing-val-dialog.ui:136 msgid "_Discrete missing values" msgstr "离散缺失值(_D)" #: src/ui/gui/missing-val-dialog.ui:172 msgid "_Low:" msgstr "低(_L)：" #: src/ui/gui/missing-val-dialog.ui:197 msgid "_High:" msgstr "高(_H)：" #: src/ui/gui/missing-val-dialog.ui:221 msgid "Di_screte value:" msgstr "离散值(_s)：" #: src/ui/gui/missing-val-dialog.ui:245 msgid "_Range plus one optional discrete missing value" msgstr "区间及一个可选离散缺失值(_R)" #: src/ui/gui/oneway.ui:21 msgid "One-Way ANOVA: Contrasts" msgstr "单因素方差分析：对照" #: src/ui/gui/oneway.ui:106 msgid "_Coefficients:" msgstr "系数(_C)：" #: src/ui/gui/oneway.ui:160 msgid "Coefficient Total: " msgstr "系数总和：" #: src/ui/gui/oneway.ui:197 msgid "Contrast 1 of 1" msgstr "对照1当中的1" #: src/ui/gui/oneway.ui:231 msgid "One-Way ANOVA" msgstr "单因素方差分析" #: src/ui/gui/oneway.ui:263 msgid "_Factor:" msgstr "因素(_F)：" #: src/ui/gui/oneway.ui:306 msgid "Dependent _Variable(s):" msgstr "因变量(_V)：" #: src/ui/gui/oneway.ui:448 msgid "_Homogeneity" msgstr "齐性(_H)" #: src/ui/gui/oneway.ui:490 msgid "Post-Hoc..." msgstr "" #: src/ui/gui/oneway.ui:505 msgid "_Contrasts..." msgstr "对照(_C)..." #: src/ui/gui/oneway.ui:572 #, fuzzy #| msgid "One-Way ANOVA: Contrasts" msgid "One-Way ANOVA: Post-Hoc" msgstr "单因素方差分析：对照" #: src/ui/gui/oneway.ui:612 #, fuzzy #| msgid "Games-Howell" msgid "Games Howell" msgstr "Games-Howell" #: src/ui/gui/oneway.ui:629 msgid "Fisher's LSD" msgstr "" #: src/ui/gui/options.ui:26 #, fuzzy #| msgid "Options" msgid "Options Case" msgstr "选项" #: src/ui/gui/options.ui:62 msgid "Display _Labels" msgstr "显示标签(_L)" #: src/ui/gui/options.ui:76 msgid "Display _Names" msgstr "显示名称(_N)" #: src/ui/gui/options.ui:102 msgid "Sort by L_abel" msgstr "按标签排序(_a)" #: src/ui/gui/options.ui:117 msgid "Sort by Na_me" msgstr "按名称排序(_m)" #: src/ui/gui/options.ui:133 msgid "Do not S_ort" msgstr "不排序(_o)" #: src/ui/gui/options.ui:160 msgid "Variable Lists" msgstr "变量列表" #: src/ui/gui/options.ui:190 msgid "Ma_ximize" msgstr "最大化(_x)" #: src/ui/gui/options.ui:205 msgid "_Raise" msgstr "提升(_R)" #: src/ui/gui/options.ui:220 msgid "Aler_t" msgstr "警示(_t)" #: src/ui/gui/options.ui:239 msgid "Output Window Action" msgstr "输出窗口动作" #: src/ui/gui/options.ui:256 msgid "Show Tips" msgstr "" #: src/ui/gui/options.ui:267 #, fuzzy #| msgid "Options" msgid "Startup Options" msgstr "选项" #: src/ui/gui/options.ui:323 msgid "Default" msgstr "" #: src/ui/gui/paired-samples.ui:147 msgid "_Test Pair(s):" msgstr "检验对(_T)：" #: src/ui/gui/rank.ui:26 msgid "Rank Cases: Types" msgstr "个案排秩：类型" #: src/ui/gui/rank.ui:56 msgid "Sum of case _weights" msgstr "个案权重之和(_w)" #: src/ui/gui/rank.ui:73 msgid "Fractional rank as _%" msgstr "分数秩为_%" #: src/ui/gui/rank.ui:91 msgid "_Fractional rank" msgstr "分数秩(_F)" #: src/ui/gui/rank.ui:108 msgid "_Savage score" msgstr "Savage得分(_S)" #: src/ui/gui/rank.ui:124 msgid "_Rank" msgstr "秩(_R)" #: src/ui/gui/rank.ui:147 msgid "N_tiles" msgstr "N层(_t)" #: src/ui/gui/rank.ui:195 msgid "_Proportion Estimates" msgstr "比例估计(_P)" #: src/ui/gui/rank.ui:213 msgid "_Normal Scores" msgstr "正态得分(_N)" #: src/ui/gui/rank.ui:252 msgid "_Blom" msgstr "_Blom公式" #: src/ui/gui/rank.ui:270 msgid "Tuke_y" msgstr "Tuke_y公式" #: src/ui/gui/rank.ui:288 msgid "Ran_kit" msgstr "Ran_kit公式" #: src/ui/gui/rank.ui:306 msgid "_Van der Waerden" msgstr "_Van der Waerden公式" #: src/ui/gui/rank.ui:329 msgid "Proportion Estimation Formula" msgstr "比例估计公式" #: src/ui/gui/rank.ui:370 msgid "Rank Cases" msgstr "个案排秩" #: src/ui/gui/rank.ui:437 msgid "_By:" msgstr "依据(_B)：" #: src/ui/gui/rank.ui:597 msgid "_Smallest Value" msgstr "最小值(_S)" #: src/ui/gui/rank.ui:615 msgid "_Largest Value" msgstr "最大值(_L)" #: src/ui/gui/rank.ui:639 msgid "Assign rank 1 to:" msgstr "分配秩1到：" #: src/ui/gui/rank.ui:658 msgid "_Display summary tables" msgstr "显示总结表(_D)" #: src/ui/gui/rank.ui:681 msgid "Rank T_ypes" msgstr "排秩类型(_T)" #: src/ui/gui/rank.ui:696 msgid "_Ties..." msgstr "同秩(_T)..." #: src/ui/gui/rank.ui:758 msgid "Rank Cases: Ties" msgstr "个案排秩：同秩" #: src/ui/gui/rank.ui:793 msgid "_Mean" msgstr "均值(_M)" #: src/ui/gui/rank.ui:811 msgid "_Low" msgstr "低(_L)" #: src/ui/gui/rank.ui:830 msgid "_High" msgstr "高(_H)" #: src/ui/gui/rank.ui:856 msgid "_Sequential ranks to unique values" msgstr "顺序秩到唯一值(_S)" #: src/ui/gui/rank.ui:880 msgid "Rank Assigned to Ties" msgstr "为同秩指定秩" #: src/ui/gui/runs.ui:155 msgid "M_ean" msgstr "均值(_e)" #: src/ui/gui/runs.ui:171 msgid "Mo_de" msgstr "众数(_o)" #: src/ui/gui/runs.ui:191 msgid "_Custom:" msgstr "自定义(_C)" #: src/ui/gui/runs.ui:230 msgid "Cut Point" msgstr "分割点" #: src/ui/gui/sort.ui:101 msgid "Sort by:" msgstr "排序变量" #: src/ui/gui/sort.ui:174 msgid "Descending" msgstr "降序" #: src/ui/gui/sort.ui:196 msgid "Sort Order" msgstr "排序顺序" #: src/ui/gui/split-file.ui:103 msgid "Anal_yze all cases. Do not create groups." msgstr "不分组，分析所有个案(_y)。" #: src/ui/gui/split-file.ui:121 msgid "Compare _groups." msgstr "分组比较(_g)" #: src/ui/gui/split-file.ui:140 msgid "Organize ou_tput by groups." msgstr "按组别输出(_t)" #: src/ui/gui/split-file.ui:225 msgid "Groups _based on:" msgstr "分组依据(_b)：" #: src/ui/gui/split-file.ui:255 msgid "_Sort the file by grouping variables." msgstr "将文件按分组变量排序(_S)。" #: src/ui/gui/split-file.ui:273 msgid "_File is already sorted." msgstr "文件已排序(_F)。" #: src/ui/gui/split-file.ui:334 msgid "Current Status : " msgstr "当前状态 ：" #: src/ui/gui/split-file.ui:348 msgid "Analysis by groups is off" msgstr "分组分析选项关闭" #: src/ui/gui/recode.ui:134 msgid "System _Missing" msgstr "系统缺失设置(_M)" #: src/ui/gui/recode.ui:149 msgid "Co_py old values" msgstr "拷贝旧值(_p)" #: src/ui/gui/recode.ui:170 msgid "Va_lue: " msgstr "值(_l)：" #: src/ui/gui/recode.ui:274 msgid "Conver_t numeric strings to numbers (`5' -> 5)" msgstr "将数字字符转换为数字，如`5' -> 5(_t)" #: src/ui/gui/recode.ui:295 msgid "Output variables are _strings" msgstr "输出变量为字符串(_s)" #: src/ui/gui/recode.ui:316 msgid "Width: " msgstr "宽度：" #: src/ui/gui/recode.ui:502 msgid "_Name:" msgstr "名称(_N)：" #: src/ui/gui/recode.ui:530 msgid "La_bel:" msgstr "标签(_b):" #: src/ui/gui/recode.ui:559 msgid "Chan_ge" msgstr "改动(_g)" #: src/ui/gui/recode.ui:587 msgid "Output Variable" msgstr "输出变量" #: src/ui/gui/recode.ui:661 msgid "Old and New Va_lues..." msgstr "旧值和新值(_l)..." #: src/ui/gui/regression.ui:50 msgid "S_tatistics..." msgstr "统计量(_t)..." #: src/ui/gui/regression.ui:272 msgid "Regression: Save" msgstr "回归：保存" #: src/ui/gui/regression.ui:293 src/ui/gui/univariate.ui:42 msgid "_Predicted values" msgstr "估计值(_P)" #: src/ui/gui/regression.ui:309 src/ui/gui/univariate.ui:59 msgid "_Residuals" msgstr "残差(_R)" #: src/ui/gui/regression.ui:352 msgid "Regression: Statistics" msgstr "回归：统计量" #: src/ui/gui/regression.ui:397 src/ui/gui/univariate.ui:143 msgid "S_tatistics" msgstr "统计量(_t)" #: src/ui/gui/reliability.ui:30 msgid "Alpha" msgstr "Alpha" #: src/ui/gui/reliability.ui:39 msgid "Reliability Analysis" msgstr "信度分析" #: src/ui/gui/reliability.ui:143 msgid "_Items:" msgstr "项(_I)：" #: src/ui/gui/reliability.ui:164 msgid "_Model: " msgstr "模型(_M)：" #: src/ui/gui/reliability.ui:211 msgid "_Variables in first split:" msgstr "第一拆分的变量(_V)：" #: src/ui/gui/reliability.ui:258 msgid "Show _descriptives for scale if item is deleted" msgstr "若项已删除则显示的描述(_d)" #: src/ui/gui/roc.ui:145 msgid "_Test Variable:" msgstr "检验变量(_T)：" #: src/ui/gui/roc.ui:175 msgid "_State Variable:" msgstr "状态变量(_S)：" #: src/ui/gui/roc.ui:202 msgid "_Value of state variable:" msgstr "状态变量值(_V)：" #: src/ui/gui/roc.ui:249 msgid "ROC C_urve" msgstr "ROC曲线(_u)" #: src/ui/gui/roc.ui:269 msgid "_With diagonal reference line" msgstr "绘制对角参考线(_W)" #: src/ui/gui/roc.ui:293 msgid "Standard _Error and Confidence Interval" msgstr "标准误和置信区间(_E)" #: src/ui/gui/roc.ui:309 msgid "_Coordinate points of the ROC Curve" msgstr "ROC曲线的坐标点(_C)" #: src/ui/gui/scatterplot.ui:25 msgid "Scatterplot" msgstr "散点图" #: src/ui/gui/scatterplot.ui:56 msgid "_X Axis:" msgstr "_X轴:" #: src/ui/gui/scatterplot.ui:100 msgid "_Y Axis:" msgstr "_Y轴:" #: src/ui/gui/select-cases.ui:33 msgid "Select Cases: Range" msgstr "选择个案：范围" #: src/ui/gui/select-cases.ui:86 msgid "First case" msgstr "第一个个案" #: src/ui/gui/select-cases.ui:98 msgid "Last case" msgstr "最后一个个案" #: src/ui/gui/select-cases.ui:110 msgid "Observation" msgstr "观测值" #: src/ui/gui/select-cases.ui:159 msgid "Select Cases" msgstr "选择个案" #: src/ui/gui/select-cases.ui:313 msgid "Use filter variable" msgstr "使用过滤变量" #: src/ui/gui/select-cases.ui:380 msgid "Based on time or case range" msgstr "基于时间或个案范围" #: src/ui/gui/select-cases.ui:395 msgid "Range..." msgstr "范围..." #: src/ui/gui/select-cases.ui:444 msgid "Random sample of cases" msgstr "随机抽取个案" #: src/ui/gui/select-cases.ui:460 msgid "Sample..." msgstr "样本..." #: src/ui/gui/select-cases.ui:508 msgid "If condition is satisfied" msgstr "若满足条件" #: src/ui/gui/select-cases.ui:523 msgid "If..." msgstr "如果..." #: src/ui/gui/select-cases.ui:572 msgid "All Cases" msgstr "所有个案" #: src/ui/gui/select-cases.ui:588 msgid "Select" msgstr "选择" #: src/ui/gui/select-cases.ui:615 msgid "Filtered" msgstr "已过滤" #: src/ui/gui/select-cases.ui:632 msgid "Deleted" msgstr "已删除" #: src/ui/gui/select-cases.ui:654 msgid "Unselected Cases Are" msgstr "未选中个案进行的操作" #: src/ui/gui/select-cases.ui:700 msgid "Select Cases: Random Sample" msgstr "选择个案：随机抽样" #: src/ui/gui/select-cases.ui:763 msgid "Sample Size" msgstr "样本大小" #: src/ui/gui/spreadsheet-import.ui:41 #, fuzzy #| msgid "Enter below the sheet number and the cell range which you wish to import." msgid "Choose below the sheet number and the cell range that you wish to import." msgstr "在下面输入要导入的工作表序号及单元格范围。" #: src/ui/gui/spreadsheet-import.ui:78 #, fuzzy #| msgid "Working File" msgid "Importing file: " msgstr "工作文件" #: src/ui/gui/spreadsheet-import.ui:118 #, fuzzy #| msgid "Use first row as _variable names" msgid "Use the first selected row as _variable names" msgstr "第一行作为变量名(_v)" #: src/ui/gui/spreadsheet-import.ui:151 msgid "_Cells: " msgstr "单元格(_C)：" #: src/ui/gui/spreadsheet-import.ui:249 msgid "Cells to Import" msgstr "要导入的单元格" #: src/ui/gui/t-test.ui:21 msgid "Options" msgstr "选项" #: src/ui/gui/t-test.ui:62 msgid "Exclude cases _analysis by analysis" msgstr "通过下列分析来进行排除个案分析(_a)" #: src/ui/gui/t-test.ui:146 msgid "One - Sample T Test" msgstr "单样本T检验" #: src/ui/gui/t-test.ui:265 msgid "Test _Value: " msgstr "检验值(_V)：" #: src/ui/gui/text-data-import.ui:29 msgid "Select the first line of the data file that contains data." msgstr "在包含数据的数据文件行中选择第一行。" #: src/ui/gui/text-data-import.ui:39 msgid "Line above selected line contains variable names" msgstr "选中行之上的行含有变量名称" #: src/ui/gui/text-data-import.ui:76 msgid "Check the data formats displayed below and fix any that are incorrect. You may set other variable properties now or later." msgstr "检查下列数据格式并更正错误。现在或以后均可设置其他变量属性。" #: src/ui/gui/text-data-import.ui:112 msgid "Variables" msgstr "变量" #: src/ui/gui/text-data-import.ui:142 msgid "Data Preview" msgstr "数据预览" #: src/ui/gui/text-data-import.ui:171 msgid "" "This assistant will guide you through the process of importing data into PSPP from a text file with one line per case, in which fields are separated by tabs, commas, or other delimiters.\n" "\n" "\tThe selected file contains N lines of text. Only the first M of these will be shown for preview purposes in the following screens. You may choose below how much of the file should actually be imported." msgstr "" "本指南将协助您以每行作为一个个案的方式从文本文件导入数据到PSPP，文本文件中字段间以制表符、逗号或其他分隔符隔开。\n" "\n" "选中的文件含有N行文本。预览窗口将只显示M行。之后您可选择您想导入的行数。" #: src/ui/gui/text-data-import.ui:239 msgid "All cases" msgstr "所有个案" #: src/ui/gui/text-data-import.ui:260 msgid "Amount to Import" msgstr "导入量" #: src/ui/gui/text-data-import.ui:314 msgid "C_ustom" msgstr "自定义(_u)" #: src/ui/gui/text-data-import.ui:329 msgid "Slas_h (/)" msgstr "斜杠 / (_h)" #: src/ui/gui/text-data-import.ui:344 msgid "Semicolo_n (;)" msgstr "分号 ; (_n)" #: src/ui/gui/text-data-import.ui:359 msgid "P_ipe (|)" msgstr "管道 | (_i)" #: src/ui/gui/text-data-import.ui:374 msgid "H_yphen (-)" msgstr "连字符 - (_y)" #: src/ui/gui/text-data-import.ui:389 msgid "Co_mma (,)" msgstr "逗号,(_)" #: src/ui/gui/text-data-import.ui:404 msgid "_Colon (:)" msgstr "冒号 :(_C)" #: src/ui/gui/text-data-import.ui:419 msgid "Ban_g (!)" msgstr "感叹号 ! (_g)" #: src/ui/gui/text-data-import.ui:434 msgid "Ta_b" msgstr "制表符(_b)" #: src/ui/gui/text-data-import.ui:449 msgid "_Space" msgstr "空格(_S)" #: src/ui/gui/text-data-import.ui:469 msgid "What characters separate fields?" msgstr "" #: src/ui/gui/text-data-import.ui:510 msgid "Single quote (')" msgstr "" #: src/ui/gui/text-data-import.ui:527 msgid "Double quote (\")" msgstr "" #: src/ui/gui/text-data-import.ui:548 #, fuzzy #| msgid "_Custom:" msgid "Custom:" msgstr "自定义(_C)" #: src/ui/gui/text-data-import.ui:589 msgid "What character quotes fields?" msgstr "" #: src/ui/gui/text-data-import.ui:627 msgid "Fields Preview" msgstr "字段预览" #: src/ui/gui/transpose.ui:24 msgid "Transpose" msgstr "转置" #: src/ui/gui/transpose.ui:91 msgid "Name Variable:" msgstr "名称变量：" #: src/ui/gui/transpose.ui:127 msgid "Variable(s):" msgstr "变量：" #: src/ui/gui/univariate.ui:25 msgid "Univariate: Save" msgstr "一元变量：保存" #: src/ui/gui/univariate.ui:103 msgid "Univariate: Statistics" msgstr "一元变量：统计量" #: src/ui/gui/univariate.ui:178 msgid "Univariate" msgstr "一元变量" #: src/ui/gui/univariate.ui:281 msgid "_Dependent Variable" msgstr "因变量(_D)" #: src/ui/gui/univariate.ui:329 msgid "_Fixed Factors" msgstr "固定因子(_F)" #: src/ui/gui/val-labs-dialog.ui:101 msgid "Value Label:" msgstr "值标签：" #: src/ui/gui/data-editor.ui:33 msgid "Information Area" msgstr "信息区" #: src/ui/gui/data-editor.ui:55 msgid "Case Counter Area" msgstr "个案计数区" #: src/ui/gui/data-editor.ui:80 msgid "Filter Use Status Area" msgstr "过滤器使用状态区" #: src/ui/gui/data-editor.ui:106 msgid "Weight Status Area" msgstr "权重状态区" #: src/ui/gui/data-editor.ui:132 msgid "Split File Status Area" msgstr "文件拆分状态区" #: src/ui/gui/data-editor.ui:154 msgid "_View" msgstr "视图(_V)" #: src/ui/gui/data-editor.ui:157 msgid "_Status Bar" msgstr "状态栏(_S)" #: src/ui/gui/data-editor.ui:163 msgid "_Font..." msgstr "字体(_F)" #: src/ui/gui/data-editor.ui:167 msgid "_Grid Lines" msgstr "网格线(_G)" #: src/ui/gui/data-editor.ui:171 msgid "Value _Labels" msgstr "值标签(_L)" #: src/ui/gui/data-editor.ui:182 msgid "_Variables" msgstr "变量(_V)" #: src/ui/gui/data-editor.ui:192 msgid "_Sort Cases..." msgstr "排序(_S)" #: src/ui/gui/data-editor.ui:196 msgid "_Transpose..." msgstr "转置(_T)" #: src/ui/gui/data-editor.ui:200 msgid "_Aggregate..." msgstr "汇总(_A)" #: src/ui/gui/data-editor.ui:206 msgid "S_plit File..." msgstr "分割文件(_p)" #: src/ui/gui/data-editor.ui:210 msgid "Select _Cases..." msgstr "选择个案(_C)" #: src/ui/gui/data-editor.ui:214 msgid "_Weight Cases..." msgstr "个案加权(_W)" #: src/ui/gui/data-editor.ui:220 msgid "_Transform" msgstr "变换(_T)" #: src/ui/gui/data-editor.ui:223 msgid "_Compute..." msgstr "计算(_C)..." #: src/ui/gui/data-editor.ui:227 msgid "Cou_nt..." msgstr "计数(_n)..." #: src/ui/gui/data-editor.ui:231 msgid "Ran_k Cases..." msgstr "个案排序(_k)..." #: src/ui/gui/data-editor.ui:235 msgid "Auto_matic Recode..." msgstr "自动编码(_m)..." #: src/ui/gui/data-editor.ui:241 msgid "Recode into _Same Variables..." msgstr "重编码到变量自身(_S)" #: src/ui/gui/data-editor.ui:245 msgid "Recode into _Different Variables..." msgstr "重编码到其他变量(_D)" #: src/ui/gui/data-editor.ui:251 msgid "_Run Pending Transforms" msgstr "运行设定好的转换(_R)" #: src/ui/gui/data-editor.ui:257 msgid "_Analyze" msgstr "分析(_A)" #: src/ui/gui/data-editor.ui:260 msgid "_Descriptive Statistics" msgstr "描述性统计(_D)" #: src/ui/gui/data-editor.ui:262 msgid "_Frequencies..." msgstr "频率(_F)" #: src/ui/gui/data-editor.ui:270 msgid "_Explore..." msgstr "数据探索(_E)" #: src/ui/gui/data-editor.ui:274 msgid "_Crosstabs..." msgstr "交叉表(_C)" #: src/ui/gui/data-editor.ui:279 #, fuzzy #| msgid "_Variables..." msgid "_Tables..." msgstr "变量(_V)..." #: src/ui/gui/data-editor.ui:283 msgid "Compare _Means" msgstr "比较均值(_M)" #: src/ui/gui/data-editor.ui:285 msgid "_Means..." msgstr "均值(_M)" #: src/ui/gui/data-editor.ui:289 msgid "_One Sample T Test..." msgstr "单样本T检验(_O)..." #: src/ui/gui/data-editor.ui:293 msgid "_Independent Samples T Test..." msgstr "独立样本T检验(_I)..." #: src/ui/gui/data-editor.ui:297 msgid "_Paired Samples T Test..." msgstr "成对样本T检验(_P)..." #: src/ui/gui/data-editor.ui:301 msgid "One Way _ANOVA..." msgstr "单因素方差分析(_A)..." #: src/ui/gui/data-editor.ui:306 msgid "_Univariate Analysis..." msgstr "单变量分析(_U)..." #: src/ui/gui/data-editor.ui:310 msgid "Bivariate _Correlation..." msgstr "二元相关性(_C)..." #: src/ui/gui/data-editor.ui:314 msgid "_K-Means Cluster..." msgstr "K-均值聚类分析(_K)" #: src/ui/gui/data-editor.ui:318 msgid "_Factor Analysis..." msgstr "因子分析(_F)" #: src/ui/gui/data-editor.ui:322 msgid "Re_liability..." msgstr "信度分析(_l)..." #: src/ui/gui/data-editor.ui:326 msgid "_Regression" msgstr "回归(_R)" #: src/ui/gui/data-editor.ui:329 msgid "_Linear..." msgstr "线性回归(_L)..." #: src/ui/gui/data-editor.ui:333 msgid "_Binary Logistic..." msgstr "二元Logistic回归分析(_B)..." #: src/ui/gui/data-editor.ui:339 msgid "_Non-Parametric Statistics" msgstr "非参数统计(_N)" #: src/ui/gui/data-editor.ui:342 msgid "_Chi Square..." msgstr "卡方(_C)..." #: src/ui/gui/data-editor.ui:346 msgid "_Binomial..." msgstr "二项分布检验(_B)..." #: src/ui/gui/data-editor.ui:350 msgid "_Runs..." msgstr "运行次数(_R)" #: src/ui/gui/data-editor.ui:354 msgid "_1 Sample K-S..." msgstr "单样本K-S检验(_1)" #: src/ui/gui/data-editor.ui:358 msgid "_2 Related Samples..." msgstr "两个相关样本检验(_2)..." #: src/ui/gui/data-editor.ui:362 msgid "_K Related Samples..." msgstr "K个相关样本检验(_K)..." #: src/ui/gui/data-editor.ui:366 msgid "K _Independent Samples..." msgstr "K独立样本检验(_I)..." #: src/ui/gui/data-editor.ui:372 msgid "ROC Cur_ve..." msgstr "ROC曲线(_v)..." #: src/ui/gui/data-editor.ui:378 msgid "_Graphs" msgstr "图形(_G)" #: src/ui/gui/data-editor.ui:381 msgid "_Scatterplot" msgstr "散点图(_S)" #: src/ui/gui/data-editor.ui:385 msgid "_Histogram" msgstr "直方图(_H)" #: src/ui/gui/data-editor.ui:389 msgid "_Barchart" msgstr "条形图(_B)" #: src/ui/gui/data-editor.ui:395 msgid "_Utilities" msgstr "工具(_U)" #: src/ui/gui/data-editor.ui:398 msgid "_Variables..." msgstr "变量(_V)..." #: src/ui/gui/data-editor.ui:402 msgid "Data File _Comments..." msgstr "数据文件注释(_C)..." #: src/ui/gui/output-window.ui:71 msgid "_Print..." msgstr "打印(_P)..." #: src/ui/gui/output-window.ui:76 msgid "_Export..." msgstr "导出(_E)..." #: src/ui/gui/output-window.ui:97 msgid "Select _All" msgstr "选择全部(_A)" #: src/ui/gui/syntax-editor.ui:27 msgid "Syntax" msgstr "语法" #: src/ui/gui/syntax-editor.ui:31 msgid "Data" msgstr "数据" #: src/ui/gui/syntax-editor.ui:41 msgid "_Save" msgstr "保存(_S)" #: src/ui/gui/syntax-editor.ui:46 msgid "Save _As" msgstr "另存为(_A)" #: src/ui/gui/syntax-editor.ui:53 msgid "_Print" msgstr "打印(_P)" #: src/ui/gui/syntax-editor.ui:84 msgid "_Delete" msgstr "删除(_D)" #: src/ui/gui/syntax-editor.ui:90 msgid "_Undo" msgstr "撤销(_U)" #: src/ui/gui/syntax-editor.ui:94 msgid "_Redo" msgstr "重做(_R)" #: src/ui/gui/syntax-editor.ui:100 #, fuzzy #| msgid "Find" msgid "_Find" msgstr "查找" #: src/ui/gui/syntax-editor.ui:106 msgid "_Run" msgstr "运行(_R)" #: src/ui/gui/syntax-editor.ui:109 msgid "_All" msgstr "全部(_A)" #: src/ui/gui/syntax-editor.ui:113 msgid "_Selection" msgstr "选中(_S)" #: src/ui/gui/syntax-editor.ui:118 msgid "_To End" msgstr "至末尾(_T)" #: src/ui/gui/syntax-editor.ui:124 #, fuzzy #| msgid "_Syntax" msgid "A_uto Syntax" msgstr "语法文件(_S)" #: src/ui/gui/syntax-editor.ui:129 #, fuzzy #| msgid "Save Syntax" msgid "_Interactive Syntax" msgstr "保存语法" #: src/ui/gui/syntax-editor.ui:134 #, fuzzy #| msgid "_Syntax" msgid "_Batch Syntax" msgstr "语法文件(_S)" #: src/ui/gui/var-type-dialog.ui:99 msgid "Scientific notation" msgstr "科学符号" #: src/ui/gui/var-type-dialog.ui:150 msgid "Custom currency" msgstr "自定义货币" #: src/ui/gui/var-type-dialog.ui:267 msgid "positive" msgstr "正" #: src/ui/gui/var-type-dialog.ui:279 msgid "negative" msgstr "负" #: src/ui/gui/var-type-dialog.ui:350 msgid "Width:" msgstr "宽度：" #: src/ui/gui/var-type-dialog.ui:396 msgid "Decimal Places:" msgstr "小数位置：" #: src/ui/gui/weight.ui:24 msgid "Weight Cases" msgstr "加权个案" #: src/ui/gui/weight.ui:100 msgid "Weight cases by" msgstr "加权个案" #: src/ui/gui/weight.ui:144 msgid "Frequency Variable" msgstr "频率变量" #: src/ui/gui/weight.ui:198 msgid "Current Status: " msgstr "当前状态：" #. TRANSLATORS: This is the application name in the desktop file #: doc/org.gnu.pspp.metainfo.xml.in:7 doc/org.gnu.pspp.desktop.in:6 msgid "GNU PSPP" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:8 #, fuzzy #| msgid "A program for the analysis of sampled data" msgid "GNU PSPP is a program for statistical analysis of sampled data" msgstr "样本数据分析软件" #: doc/org.gnu.pspp.metainfo.xml.in:10 msgid "GNU PSPP is a program for the statistical analysis of sampled data. It is a Free replacement for the proprietary program SPSS, and appears very similar to it with a few exceptions. The most important of these exceptions are, that there are no “time bombs”; your copy of PSPP will not “expire” or deliberately stop working in the future. Neither are there any artificial limits on the number of cases or variables which you can use. There are no additional packages to purchase in order to get “advanced” functions; all functionality that PSPP currently supports is in the core package." msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:11 msgid "PSPP is a stable and reliable application. It can perform descriptive statistics, T-tests, anova, linear and logistic regression, measures of association, cluster analysis, reliability and factor analysis, non-parametric tests and more. Its backend is designed to perform its analyses as fast as possible, regardless of the size of the input data. You can use PSPP with its graphical interface or the more traditional syntax commands." msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:12 msgid "A brief list of some of PSPP's features." msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:14 msgid "Support for over 1 billion cases" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:15 msgid "Support for over 1 billion variables" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:16 msgid "Syntax and data files which are compatible with those of SPSS" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:17 msgid "A choice of terminal or graphical user interface" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:18 msgid "A choice of text, postscript, pdf, opendocument, html or TeX output formats" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:19 msgid "Inter-operability with: LibreOffice, Apache OpenOffice, Gnumeric and other free software" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:20 msgid "Easy data import from spreadsheets, text files and database sources" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:21 msgid "The capability to open, analyse and edit two or more datasets concurrently" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:22 msgid "A user interface supporting all common character sets" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:23 msgid "The user interface has been translated to multiple languages" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:24 msgid "Very fast statistical procedures, even on very large data sets" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:25 msgid "No license fees and no expiration period" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:26 msgid "No unethical “end user license agreements”" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:27 msgid "A fully indexed user manual" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:28 msgid "Freedom ensured; It is licensed under the GPLv3 or later" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:29 msgid "Portability; Runs on many different computers and many different operating systems" msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:31 msgid "PSPP is particularly aimed at statisticians, social scientists and students requiring fast convenient analysis of sampled data." msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:32 msgid "The Flatpak for PSPP includes graphical and command-line interfaces. To use the command-line interface, run: flatpak run --command=pspp org.gnu.pspp." msgstr "" #: doc/org.gnu.pspp.metainfo.xml.in:43 #, fuzzy #| msgid "Variable View" msgid "GNU PSPP Variable View" msgstr "变量视图" #: doc/org.gnu.pspp.metainfo.xml.in:52 #, fuzzy #| msgid "Statistics" msgid "statistics" msgstr "统计量" #: doc/org.gnu.pspp.metainfo.xml.in:56 msgid "Free Software Foundation" msgstr "" #: doc/org.gnu.pspp.desktop.in:7 msgid "Statistical Software" msgstr "统计软件" #: doc/org.gnu.pspp.desktop.in:8 msgid "Analyze statistical data with a free alternative to SPSS" msgstr "替代SPSS的免费数据统计分析软件" #. TRANSLATORS: You must keep all ";" - also at the end of line. #: doc/org.gnu.pspp.desktop.in:16 msgid "statistics;analysis;spss;" msgstr "" #~ msgid "Sorry. The help system hasn't yet been implemented." #~ msgstr "很抱歉，帮助系统尚未完成。" #~ msgid "Output format" #~ msgstr "输出格式" #, c-format #~ msgid "Support for %s files was not compiled into this installation of PSPP" #~ msgstr "兼容%s类型文件的PSPP模块未安装" #, c-format #~ msgid "%s is not a valid name for a multiple response set. Multiple response set names must begin with `$'." #~ msgstr "多重响应集名称%s不符合要求，多重响应集名称必须以`$'开头。" #~ msgid "expecting end of command" #~ msgstr "要求结束指令" #~ msgid "Unexpected `.' in middle of command" #~ msgstr "指令中的`.'不符合要求" #, c-format #~ msgid "No more than %d %s subcommands allowed." #~ msgstr "子命令不能超过%d %s。" #, c-format #~ msgid "The high end of the range (%.*g) is below the low end (%.*g). The range will be treated as if reversed." #~ msgstr "区间上界值(%.*g)低于下界值(%.*g)，视为反转区间处理。" #, c-format #~ msgid "When using the TO keyword to specify several variables, both variables must be from the same variable dictionaries, of either ordinary, scratch, or system variables. %s is a %s variable, whereas %s is %s." #~ msgstr "使用关键字TO指定多个变量时，这些变量必需出自相同的普通变量、临时变量或系统变量表。%s是%s变量，而%s是%s。" #~ msgid "Scratch variables not allowed here." #~ msgstr "不能使用临时变量。" #~ msgid "The sampling factor must be between 0 and 1 exclusive." #~ msgstr "取样因子的值必须介于（不含）0和1之间。" #, c-format #~ msgid "Cannot sample %d observations from a population of %d." #~ msgstr "%d的样本量无法自%d的种群中获取。" #, c-format #~ msgid "%zu variable(s) cannot be recoded into %zu variable(s). Specify the same number of variables as source and target variables." #~ msgstr "变量%zu不能重新编码为变量%zu。请指定同样数量的源变量及目标变量。" #, c-format #~ msgid "Cannot recode because the variable %s would require a width of %d bytes or greater, but it has a width of only %d bytes." #~ msgstr "无法进行重编码，因为变量%s要求宽度等于或大于%d字节，而其宽度仅为%d字节。" #, c-format #~ msgid "%s without %s." #~ msgstr "%s 没有 %s。" #, c-format #~ msgid "This command must appear inside %s...%s, without intermediate %s...%s." #~ msgstr "该指令必须处于%s...%s内，不能处于有中间的%s...%s。" #, c-format #~ msgid "This command may not follow %s in %s ... %s." #~ msgstr "该指令可能未随%s于%s...%s之内。" #~ msgid "Attribute array index must be between 1 and 65535." #~ msgstr "特征数组索引值必须介于1到65535之间。" #, c-format #~ msgid "Cannot mix numeric variables (e.g. %s) and string variables (e.g. %s) within a single list." #~ msgstr "同一个列表中数字型变量（如%s）和字符串变量（如%s)不能混合使用。" #~ msgid "Cannot specify ALL after specifying a set of variables." #~ msgstr "设定一组变量之后不能再设置为ALL。" #, c-format #~ msgid "%s subcommand may be given at most once. It may not be given in conjunction with the %s subcommand." #~ msgstr "子命令%s只可使用一次。不能与子命令%s联合使用。" #, c-format #~ msgid "Unrecognized subcommand name `%s'." #~ msgstr "无法识别命令名称`%s'。" #~ msgid "Subcommand name expected." #~ msgstr "要求子命令名称。" #, c-format #~ msgid "VARIABLES specified only variable %s on %s, but at least two variables are required." #~ msgstr "VARIABLES里列举了变量%s于%s上，但要求至少列出2个变量。" #, c-format #~ msgid "MDGROUP subcommand for group %s specifies a string VALUE, but the variables specified for this group are numeric." #~ msgstr "组%s的MDGROUP子命令给出一个字符串VALUE，而该组要求变量为数字型。" #, c-format #~ msgid "VALUE string on MDGROUP subcommand for group %s is %d bytes long, but it must be no longer than the narrowest variable in the group, which is %s with a width of %d bytes." #~ msgstr "组%s的MDGROUP子命令的VALUE字符串长度为%d字节，但系统要求不能超过组内最短的变量的长度，即变量%s的%d字节。" #~ msgid "Details" #~ msgstr "详细信息" #~ msgid "Multiple dichotomy set" #~ msgstr "多重二分休" #~ msgid "Multiple category set" #~ msgstr "多重类别集" #~ msgid "Label source" #~ msgstr "标签来源" #~ msgid "First variable label among variables" #~ msgstr "首个变量标签" #~ msgid "Provided by user" #~ msgstr "用户指定" #~ msgid "Category label source" #~ msgstr "类别标签来源" #~ msgid "Value labels of counted value" #~ msgstr "计数值的值标签" #, c-format #~ msgid "Format type %s may not be used with a string variable." #~ msgstr "格式类型%s可能不能用于字符串变量。" #~ msgid "Label:" #~ msgstr "标签：" #~ msgid "No label." #~ msgstr "没有标签。" #~ msgid "Product:" #~ msgstr "产品：" #~ msgid "Variables:" #~ msgstr "变量：" #~ msgid "Cases:" #~ msgstr "个案：" #~ msgid "Type:" #~ msgstr "类型：" #~ msgid "Description" #~ msgstr "描述" #, c-format #~ msgid "File label: %s" #~ msgstr "文件标签：%s" #~ msgid "Macros not supported." #~ msgstr "不支持的宏。" #~ msgid "The active dataset dictionary does not contain any documents." #~ msgstr "活动数据集字典没有包含任何文件。" #~ msgid "Documents in the active dataset:" #~ msgstr "活动数据集中的文件：" #, c-format #~ msgid "Label: %s\n" #~ msgstr "标签：%s\n" #, c-format #~ msgid "Format: %s\n" #~ msgstr "格式：%s\n" #, c-format #~ msgid "Print Format: %s\n" #~ msgstr "打印格式：%s\n" #, c-format #~ msgid "Measure: %s\n" #~ msgstr "衡量：%s\n" #, c-format #~ msgid "Role: %s\n" #~ msgstr "角色：%s\n" #, c-format #~ msgid "Display Alignment: %s\n" #~ msgstr "显示对齐：%s\n" #, c-format #~ msgid "Display Width: %d\n" #~ msgstr "显示宽度：%d\n" #~ msgid "Missing Values: " #~ msgstr "缺失值：" #~ msgid "A slash must separate each vector specification in VECTOR's long form." #~ msgstr "在长格式VECTOR中必须使用斜线将每个向量分隔开。" #~ msgid "Variable display width must be a positive integer." #~ msgstr "变量显示宽度必须为一个正整数。" #~ msgid "Interactive shell not supported on this platform." #~ msgstr "运行平台不支持交互式命令shell。" #, c-format #~ msgid "Error executing command: %s." #~ msgstr "指令运行出错：%s。" #~ msgid "Unknown TABLECELLS class" #~ msgstr "未知的TABLECELLS类" #, c-format #~ msgid "Cannot stat %s: %s" #~ msgstr "无法统计%s：%s" #~ msgid "Median average" #~ msgstr "中位数平均" #, c-format #~ msgid "Variable name %s is not unique within the aggregate file dictionary, which contains the aggregate variables and the break variables." #~ msgstr "变量名称%s在包含汇总变量和中断变量的汇总文件字典中非唯一。" #, c-format #~ msgid "Exact Sig. (%d-tailed)" #~ msgstr "精确显著性(%d-尾)" #~ msgid "expecting statistic name: reverting to default" #~ msgstr "要求统计量名称：恢复到默认设置" #, c-format #~ msgid "Valid cases = %.*g; cases with missing value(s) = %.*g." #~ msgstr "有效个案数 = %.*g；有缺失值的个案数 = %.*g。" #, c-format #~ msgid "%g" #~ msgstr "%g" #, c-format #~ msgid "%s may not be negative. Using default value (%g)." #~ msgstr "%s可能非负，使用默认值(%g)。" #~ msgid "Percentiles must lie in the range (0, 100)" #~ msgstr "百分位必须处于区间(0, 100)" #~ msgid "Factor analysis without variables is not possible." #~ msgstr "因子分析不能在没有变量的情况下进行。" #, c-format #~ msgid "%d" #~ msgstr "%d" #, c-format #~ msgid "%zu" #~ msgstr "%zu" #~ msgid "Histogram frequency must be greater than zero." #~ msgstr "直方图频率必须大于零。" #~ msgid "Histogram percentage must be greater than zero." #~ msgstr "直方图百分比必须大于零。" #, c-format #~ msgid "%s for histogram must be greater than or equal to %s, but %s was specified as %.15g and %s as %.15g. %s and %s will be ignored." #~ msgstr "直方图的%s必须大于或等于%s，但设定是：%s 为 %.15g 和 %s 为 %.15g。%s和%s将被忽略。" #, c-format #~ msgid "%s for pie chart must be greater than or equal to %s, but %s was specified as %.15g and %s as %.15g. %s and %s will be ignored." #~ msgstr "饼状图的%s必须大于或等于%s，但设定是：%s 为 %.15g 和 %s 为 %.15g。%s和%s将被忽略。" #~ msgid "50 (Median)" #~ msgstr "50 (中位数)" #~ msgid "Only types 1, 2 & 3 sums of squares are currently implemented" #~ msgstr "仅支持平方和类型1，2和3" #~ msgid "Variable expected" #~ msgstr "要求为变量。" #~ msgid "FOOTNOTE is not implemented yet for GRAPH" #~ msgstr "GRAPH命令中暂不支持FOOTNOTE子命令" #~ msgid "Cut point value must be in the range [0,1]" #~ msgstr "分割点的值必须处于区间[0,1]" #, c-format #~ msgid "(%d)" #~ msgstr "(%d)" #~ msgid "Min" #~ msgstr "最小值" #~ msgid "Max" #~ msgstr "最大值" #, c-format #~ msgid "%g%%" #~ msgstr "%g%%" #, c-format #~ msgid "%s subcommand not currently implemented." #~ msgstr "当前版本不含%s子命令。" #, c-format #~ msgid "The specified value of HI (%d) is lower than the specified value of LO (%d)" #~ msgstr "指定的HI值(%d)小于指定的LO值(%d)" #~ msgid "25th" #~ msgstr "25%" #~ msgid "50th (Median)" #~ msgstr "50%(中位数)" #~ msgid "75th" #~ msgstr "75%" #, c-format #~ msgid "(I) %s" #~ msgstr "(I) %s" #, c-format #~ msgid "(J) %s" #~ msgstr "(J) %s" #~ msgid "(I - J)" #~ msgstr "(I - J)" #~ msgid "The number of clusters must be positive" #~ msgstr "类群数量必须为正" #~ msgid "The convergence criterium must be positive" #~ msgstr "迭代次数必须为正" #~ msgid "The number of iterations must be positive" #~ msgstr "迭代次数必须为正" #, c-format #~ msgid "%s into %s(%s of %s using %s BY %s)" #~ msgstr "%s在%s之内(%s在%s内，使用%s经由%s)" #, c-format #~ msgid "%s into %s(%s of %s BY %s)" #~ msgstr "%s在%s之内(%s在%s内经由%s)" #, c-format #~ msgid "%s into %s(%s of %s using %s)" #~ msgstr "%s在%s之内(%s在%s内使用%s)" #, c-format #~ msgid "%s into %s(%s of %s)" #~ msgstr "%s在%s之内(%s在%s内)" #, c-format #~ msgid "Area Under the Curve (%s)" #~ msgstr "曲线下面积(%s)" #, c-format #~ msgid "Coordinates of the Curve (%s)" #~ msgstr "曲线(%s)的坐标" #~ msgid "Buffer limit must be at least 2." #~ msgstr "缓冲限制必须至少为2。" #, c-format #~ msgid "Active dataset lacks BY variable %s." #~ msgstr "活动数据集缺少BY变量%s。" #, c-format #~ msgid "In an earlier file, %s was numeric." #~ msgstr "之前文件中，%s为数字类型。" #, c-format #~ msgid "In an earlier file, %s was a string variable with width %d." #~ msgstr "之前文件中，%s是长度%d的字符串类型。" #, c-format #~ msgid "The %s value must be nonnegative." #~ msgstr "%s值不能为负数。" #, c-format #~ msgid "The %s subcommand may only be specified once." #~ msgstr "子指令%s仅须指定一次。" #~ msgid "(active dataset)" #~ msgstr "(活动数据集)" #, c-format #~ msgid "Record length (%d) must be between 1 and %lu bytes. Assuming %zu-character records." #~ msgstr "记录长度(%d)必须处于1和%lu字节间，默认为%zu-字符长度的记录。" #, c-format #~ msgid "Unsupported TYPE %s." #~ msgstr "不支持TYPE %s。" #, c-format #~ msgid "%s must be followed by either \"%s\" or \"%s\"." #~ msgstr "%s后必须接以\"%s\" 或 \"%s\"。" #, c-format #~ msgid "%s is allowed only with %s arrangement, but %s arrangement was stated or implied earlier in this command." #~ msgstr "%s仅随%s排列使用，但该命令之前已声明或暗示使用%s排列。" #, c-format #~ msgid "Value of %s must be 1 or greater." #~ msgstr "%s的值必须大于等于1。" #, c-format #~ msgid "The record number specified, %ld, is at or before the previous record, %d. Data fields must be listed in order of increasing record number." #~ msgstr "指定的记录编号%ld占据或居于前一记录%d位置之前。数据字段必须以记录编号的升序方式列出。" #, c-format #~ msgid "The record number specified, %ld, exceeds the number of records per case specified on FIXCASE, %d." #~ msgstr "指定的记录编号%ld超过FIXCASE指定的个案记录数量%d。" #, c-format #~ msgid "The first case (%ld) specified precedes the last case (%ld) specified. The values will be swapped." #~ msgstr "第一个个案(%ld)先于最后一个个案(%ld)前指定。他们的值将被互换。" #, c-format #~ msgid "The first case (%ld) to list is numbered less than 1. The value is being reset to 1." #~ msgstr "要列出的第一个个案(%ld)编号小于1，将被重设为1。" #, c-format #~ msgid "The last case (%ld) to list is numbered less than 1. The value is being reset to 1." #~ msgstr "要列出的最后一个个案(%ld)编号小于1，将被重设为1。" #, c-format #~ msgid "The step value %ld is less than 1. The value is being reset to 1." #~ msgstr "步长%ld小于1，将被重设为1。" #~ msgid "expecting a valid subcommand" #~ msgstr "要求有效的子命令" #, c-format #~ msgid "Writing %zu record to %s." #~ msgid_plural "Writing %zu records to %s." #~ msgstr[0] "写入%zu条记录到%s。" #, c-format #~ msgid "Writing %zu record." #~ msgid_plural "Writing %zu records." #~ msgstr[0] "写入%zu条记录。" #, c-format #~ msgid "There are %d variable declared but the data has at least %d matrix rows." #~ msgstr "声明了%d个变量，但数据含有至少 %d矩阵行。" #~ msgid "The N subcommand was specified, but a N record was also found in the data. The N record will be ignored." #~ msgstr "设置了N个子命令，但数据中也含有一个N记录。这个N记录将被忽略。" #, c-format #~ msgid "%s must not be negative." #~ msgstr "%s不能为负数。" #, c-format #~ msgid "Cannot rename %s as %s because there already exists a variable named %s. To rename variables with overlapping names, use a single RENAME subcommand such as `/RENAME (A=B)(B=C)(C=A)', or equivalently, `/RENAME (A B C=B C A)'." #~ msgstr "不能将变量%s重命名为%s，因为变量%s已经存在。使用RENAME子命令为重复的变量名称重命名，例如`/RENAME (A=B)(B=C)(C=A)'或`/RENAME (A B C=B C A)'。" #, c-format #~ msgid "Number of variables on left side of `=' (%zu) does not match number of variables on right side (%zu), in parenthesized group %d of RENAME subcommand." #~ msgstr "`=' (%zu)左边的变量数量与右边变量数量(%zu)不匹配。请检查RENAME子命令括号内的组%d。" #~ msgid "One of the arguments to a DATE function is not an integer. The result will be system-missing." #~ msgstr "DATE函数的一个参数不是整数，结果将返回系统缺失值。" #~ msgid "The week argument to DATE.WKYR is not an integer. The result will be system-missing." #~ msgstr "DATE.WKYR的星期参数不是整数，返回值将为系统缺失值。" #~ msgid "The week argument to DATE.WKYR is outside the acceptable range of 1 to 53. The result will be system-missing." #~ msgstr "DATE.WKYR的星期参数超出可接收范围1~53，返回值将为系统缺失值。" #~ msgid "The day argument to DATE.YRDAY is not an integer. The result will be system-missing." #~ msgstr "DATE.YRDAY的天数参数不是整数，返回值将为系统缺失值。" #~ msgid "The day argument to DATE.YRDAY is outside the acceptable range of 1 to 366. The result will be system-missing." #~ msgstr "DATE.YRDAY的天数参数超出范围1~366之外，返回值将为系统缺失值。" #~ msgid "The year argument to YRMODA is greater than 47516. The result will be system-missing." #~ msgstr "DATE.YRDAY的年数参数大于47516，返回值将为系统缺失值。" #, c-format #~ msgid "Type mismatch while applying %s operator: cannot convert %s to %s." #~ msgstr "执行%s操作时类型不匹配：不能将%s转换为%s。" #, c-format #~ msgid "%s must have at least %d arguments in list." #~ msgstr "%s必须至少含有%d个参数。" #, c-format #~ msgid "%s must have multiple of %d arguments in list." #~ msgstr "%s要求参数数量为%d的倍数。" #, c-format #~ msgid "With %s, using minimum valid argument count of %d does not make sense when passing only %d arguments in list." #~ msgstr "对%s而言，使用最小有效参数数量%d无意义，因为仅传递了%d个参数。" #, c-format #~ msgid "Unsupported compression type (%d)" #~ msgstr "不支持压缩类型(%d)" #, c-format #~ msgid "Failed to seek to end of central directory record: %s" #~ msgstr "中央记录末端查询失败：%s" #, c-format #~ msgid "Failed to seek to central directory: %s" #~ msgstr "中央记录查询失败：%s" #, c-format #~ msgid "Failed to seek to start of member `%s': %s" #~ msgstr "头端查询失败`%s': %s" #~ msgid "HAverage" #~ msgstr "调和平均值" #~ msgid "Rounded" #~ msgstr "舍入取整" #~ msgid "Empirical" #~ msgstr "经验" #~ msgid "Empirical with averaging" #~ msgstr "经验平均" #, c-format #~ msgid "ascii: closing output file `%s'" #~ msgstr "ascii:关闭输入文件`%s'" #, c-format #~ msgid "%s - Page %d" #~ msgstr "%s - %d页" #, c-format #~ msgid "%s is not a valid device type (the choices are `%s' and `%s')" #~ msgstr "%s不是有效设备类型(可选`%s' 及 `%s')" #, c-format #~ msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n" #~ msgstr "vline错误：x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d)，位于表格大小(%d,%d)中\n" #, c-format #~ msgid "bad hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in table size (%d,%d)\n" #~ msgstr "hline错误：x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d，位于表格大小(%d,%d)中\n" #, c-format #~ msgid "bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n" #~ msgstr "box错误: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d)，位于表格大小(%d,%d)中\n" #, c-format #~ msgid "The defined page is not wide enough to hold at least %d characters in the default font. In fact, there's only room for %d characters." #~ msgstr "指定的页面宽度不足容纳默认字体的至少%d个字符，仅能容纳%d个字符。" #, c-format #~ msgid "The defined page is not long enough to hold at least %d lines in the default font. In fact, there's only room for %d lines." #~ msgstr "指定的页面不足容纳默认字体的至少%d行，仅能容纳%d行。" #, c-format #~ msgid "Mean = %.1f" #~ msgstr "均值 = %.1f" #, c-format #~ msgid "Std. Dev = %.2f" #~ msgstr "标准差 = %.2f" #~ msgid "error creating temporary file" #~ msgstr "创建临时文件时出错" #, c-format #~ msgid "Cannot parse field content `%.*s' as format %s: %s" #~ msgstr "不能将字段内容`%.*s' 解析为格式 %s: %s" #~ msgid "This input line has too few separators to fill in this field." #~ msgstr "输入行的分隔数过少不足以分隔字段。" #~ msgid "An error occurred reading the spreadsheet file." #~ msgstr "读取工作表文件时发生错误。" #~ msgid "Enter a number to add a new variable." #~ msgstr "输入一个数字以添加新变量。" #~ msgid "Enter a number to add a new case." #~ msgstr "输入一个数字以添加新个案。" #~ msgid "Duplicate variable name." #~ msgstr "变量名重复" #~ msgid "Message" #~ msgstr "信息" #, c-format #~ msgid "\"%s\" is not a valid variable name." #~ msgstr "\"%s\"不是有效的变量名称。" #, c-format #~ msgid "This dictionary already contains a variable named \"%s\"." #~ msgstr "该字典已包含名称为\"%s\"的变量。" #~ msgid "Cannot rename variable." #~ msgstr "不能重命名变量。" #~ msgid "Enter a variable name to add a new variable." #~ msgstr "输入变量名称以添加新变量。" #, c-format #~ msgid "{%s, %s}\n" #~ msgstr "{%s, %s}\n" #~ msgid "can only convert encrypted data file to sav or sys format" #~ msgstr "加密数据文件只能转换为sav或sys格式" #~ msgid "can only convert encrypted syntax file to sps format" #~ msgstr "加密语法文件只能转换为sps格式" #, c-format #~ msgid "%s must be between 0 and 20." #~ msgstr "%s的值必须介于0与20。" #, c-format #~ msgid "%s must be at least 1." #~ msgstr "%s必须至少为1。" #, c-format #~ msgid "%s must be at least 1MB" #~ msgstr "%s至少为1MB" #, c-format #~ msgid "%s must be positive" #~ msgstr "%s必须为正数" #, c-format #~ msgid "%s is obsolete." #~ msgstr "%s已过时。" #, c-format #~ msgid "%s must be 1500 or later." #~ msgstr "%s必须为1500或之后。" #, c-format #~ msgid "%s must be at least %d." #~ msgstr "%s必须至少为%d。" #, c-format #~ msgid "%s is %s." #~ msgstr "%s 是 %s。" #, c-format #~ msgid "Maximum value (%ld) less than minimum value (%ld)." #~ msgstr "最大值(%ld)少于最小值(%ld)。" #~ msgid "count" #~ msgstr "计数" #~ msgid "expected" #~ msgstr "期望值" #~ msgid "residual" #~ msgstr "残差" #~ msgid "std. resid." #~ msgstr "标准残差" #~ msgid "adj. resid." #~ msgstr "调整后残差" #~ msgid "Chi-square tests." #~ msgstr "卡方检验。" #, c-format #~ msgid "Odds Ratio for %s (%.*s / %.*s)" #~ msgstr "%s (%.*s / %.*s)的比值比" #, c-format #~ msgid "For cohort %s = %.*s" #~ msgstr "%s = %.*s 定群" #~ msgid "Separators" #~ msgstr "分隔符" #~ msgid "Quote separator characters with" #~ msgstr "用下列符号作分隔符的引用符号" #~ msgid "Quoting" #~ msgstr "引用" #~ msgid "_Sheet Index: " #~ msgstr "工作表索引(_S):" #~ msgid "_Current Line" #~ msgstr "当前行(_C)" #~ msgid "Multiple response set name `%s' does not begin with `$'." #~ msgstr "多重响应数据集(MRSETS)名称 `%s' 应该以 `$'开头。" #, fuzzy #~| msgid "> Median" #~ msgid "> Median" #~ msgstr ">中位数" #~ msgid "Cases < Test Value" #~ msgstr "个案<检验值" #~ msgid "<b>Histograms</b>" #~ msgstr "<b>直方图</b>" #~ msgid "<b>Bar Charts</b>" #~ msgstr "<b>柱形图</b>" #~ msgid "<b>Pie Charts</b>" #~ msgstr "<b>饼图</b>" #~ msgid "<b>Variables</b>" #~ msgstr "<b>变量</b>" #, fuzzy #~| msgid "Data Preview" #~ msgid "<b>Data Preview</b>" #~ msgstr "数据预览" #~ msgid "<b>Separators</b>" #~ msgstr "<b>分隔符</b>" #, fuzzy #~ msgid "<b>Quoting</b>" #~ msgstr "<b>字串引述</b>" #~ msgid "could not access definition for terminal `%s'" #~ msgstr "无法访问终端`%s'的定义设置" #~ msgid "" #~ "PSPPIRE, a GUI for PSPP, a program for statistical analysis of sampled data.\n" #~ "Usage: %s [OPTION]... FILE\n" #~ "\n" #~ "Arguments to long options also apply to equivalent short options.\n" #~ "\n" #~ "GUI options:\n" #~ " -q, --no-splash don't show splash screen during startup\n" #~ "\n" #~ "%sLanguage options:\n" #~ " -I, --include=DIR append DIR to search path\n" #~ " -I-, --no-include clear search path\n" #~ " -a, --algorithm={compatible|enhanced}\n" #~ " set to `compatible' if you want output\n" #~ " calculated from broken algorithms\n" #~ " -x, --syntax={compatible|enhanced}\n" #~ " set to `compatible' to disable PSPP extensions\n" #~ " -i, --interactive interpret syntax in interactive mode\n" #~ " -s, --safer don't allow some unsafe operations\n" #~ "Default search path: %s\n" #~ "\n" #~ "Informative output:\n" #~ " -h, --help display this help and exit\n" #~ " -V, --version output version information and exit\n" #~ "\n" #~ "A non-option argument is interpreted as a data file in .sav or .zsav or .por\n" #~ "format or a syntax file to load.\n" #~ msgstr "" #~ "PSPPIRE, 数据统计分析软件PSPP的图形界面。\n" #~ "用法: %s [选项]... 文件名\n" #~ "\n" #~ "选项有长、短格式，作用相同。\n" #~ "\n" #~ "图形界面选项:\n" #~ " -q, --no-splash 软件打开时不显示启动画面\n" #~ "\n" #~ "%s语言选项:\n" #~ " -I, --include=路径 将\"路径\"追加到搜索路径\n" #~ " -I-, --no-include 清空搜索路径\n" #~ " -a, --algorithm={compatible|enhanced}\n" #~ " 设置为`compatible'以输出包含分组算法结果\n" #~ " -x, --syntax={compatible|enhanced}\n" #~ " 设置为`compatible'以禁用PSPP扩展名\n" #~ " -i, --interactive 设置语法解释为互动模式\n" #~ " -s, --safer 禁止不安全的操作\n" #~ "Default search path: %s\n" #~ "\n" #~ "帮助及版本信息:\n" #~ " -h, --help 显示帮助后退出\n" #~ " -V, --version 显示版本信息后退出\n" #~ "\n" #~ "不带任何参数则程序启动运行以备载入.sav、.zsav或.por格式的数据文件或语法文件。\n" #~ msgid "_Reset" #~ msgstr "重置(_R)" #~ msgid "_Select" #~ msgstr "选择(_S)" #~ msgid "Delete the variables at the selected position(s)" #~ msgstr "删除选中的变量" #~ msgid "Delete the cases at the selected position(s)" #~ msgstr "删除选中的个案" #~ msgid "_Open..." #~ msgstr "打开(_O)..." #~ msgid "Aggregate the case values into a new variable" #~ msgstr "将多个个案总计为新变量" #~ msgid "Choose a subset of cases for analysis" #~ msgstr "选定一组个案进行分析" #~ msgid "All" #~ msgstr "全部" #~ msgid "Number of clusters may not be larger than the number of cases." #~ msgstr "类别数量不能大于个案数量。" #~ msgid "Value of %s must be between 1 and 100." #~ msgstr "%s的值必须处于1到100之间。" #~ msgid "TreeView path" #~ msgstr "树视图路径" #~ msgid "The path to the row in the GtkTreeView, as a string" #~ msgstr "到GtkTreeView行的路径，类型为字符串" #~ msgid "Diagonal slash" #~ msgstr "对角斜线" #~ msgid "Whether to draw a diagonal slash across the button." #~ msgstr "是否在按钮上绘制对角斜线。" #~ msgid "Incorrect value for variable type" #~ msgstr "变量类型的值不正确" #~ msgid "Font Selection" #~ msgstr "选择字体" #~ msgid "Import Delimited Text Data" #~ msgstr "导入分隔符分隔的文本数据。" #~ msgid "(optional case selection condition)" #~ msgstr "(自选个案选择条件)" #~ msgid "Importing Textual Data" #~ msgstr "导入文本数据" #~ msgid "Doubled quote mark treated as escape" #~ msgstr "将双引号用作转义字符" #~ msgid "Bar charts are not implemented." #~ msgstr "没有包含条形图绘制功能。" #~ msgid "No valid data for variable %s; statistics not displayed." #~ msgstr "变量%s不包含有效数据；不显示其统计量。"