# Chinese Simplified translation about findutils
# Copyright (C) 2002, 2008 Free Software Foundation, Inc.
# This file is distributed under the same license as the findutils package.
# Wang Li <charles@linux.net.cn>, 2002.
# Ji ZhengYu <zhengyuji@gmail.com>, 2008, 2009, 2010.
msgid ""
msgstr ""
"Project-Id-Version: findutils-4.5.7\n"
"Report-Msgid-Bugs-To: bug-findutils@gnu.org\n"
"POT-Creation-Date: 2010-04-03 14:10+0100\n"
"PO-Revision-Date: 2010-04-20 16:12中国标准时间\n"
"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: Plural-Forms: nplurals=1; plural=0;\n"

#: find/find.c:142 find/ftsfind.c:699
#, c-format
msgid "Failed initialise shared-file hash table"
msgstr "无法初始化共享文件哈希表"

#: find/find.c:212 find/ftsfind.c:765
#, c-format
msgid "cannot get current directory"
msgstr "无法获取当前目录"

#: find/find.c:217
#, c-format
msgid "cannot stat current directory"
msgstr "无法 stat 当前目录"

#: find/find.c:308
#, c-format
msgid "Cannot read list of mounted devices."
msgstr "无法读取挂载设备列表。"

#: find/find.c:397
#, c-format
msgid "WARNING: file system %s has recently been unmounted."
msgstr "警告: 文件系统 %s 最近已被卸载过了。"

#: find/find.c:407
#, c-format
msgid "WARNING: file system %s has recently been mounted."
msgstr "警告: 文件系统 %s 最近已被挂载过了。"

#: find/find.c:503
#, c-format
msgid "%s%s changed during execution of %s (old device number %ld, new device number %ld, file system type is %s) [ref %ld]"
msgstr "%3$s 执行期间 %1$s%2$s 改变了(原来的设备号 %4$ld，新的设备号 %5$ld，文件系统类型 %6$s) [ref %7$ld]"

#: find/find.c:540
#, c-format
msgid "%s%s changed during execution of %s (old inode number %<PRIuMAX>, new inode number %<PRIuMAX>, file system type is %s) [ref %ld]"
msgstr "%3$s 执行期间 %1$s%2$s 改变了(原来的索引节点号 %4$<PRIuMAX>，新的索引节点号 %5$<PRIuMAX>，文件系统类型 %6$s) [ref %7$ld]"

#: find/find.c:705
#, c-format
msgid "failed to return to parent directory"
msgstr "无法回到上级目录"

#: find/find.c:1027
#, c-format
msgid "Failed to safely change directory into %s"
msgstr "无法安全的更改目录至 %s"

#: find/find.c:1125 find/ftsfind.c:276
#, c-format
msgid "Symbolic link %s is part of a loop in the directory hierarchy; we have already visited the directory to which it points."
msgstr "符号链接 %s 是目录层级体系中一个循环的一部分；我们已经浏览过它所指向的目录。"

#: find/find.c:1144
#, c-format
msgid "Filesystem loop detected; %s has the same device number and inode as a directory which is %d level higher in the file system hierarchy"
msgid_plural "Filesystem loop detected; %s has the same device number and inode as a directory which is %d levels higher in the file system hierarchy"
msgstr[0] "探测到文件系统循环；%s 拥有与文件系统体系中 %d 级深度的目录一样的设备号和索引节点"

#: find/find.c:1395
#, c-format
msgid "warning: not following the symbolic link %s"
msgstr "警告: 符号链接 %s 无法检索"

#: find/find.c:1438
#, c-format
msgid "WARNING: Hard link count is wrong for %s (saw only st_nlink=%<PRIuMAX> but we already saw %<PRIuMAX> subdirectories): this may be a bug in your file system driver.  Automatically turning on find's -noleaf option.  Earlier results may have failed to include directories that should have been searched."
msgstr "警告: %s 的硬链接数错误(仅查到 st_nlink=%<PRIuMAX> 但我们已经查到 %<PRIuMAX> 个子目录): 这可能是您文件系统驱动中的错误。find 的 -noleaf 选项是自动开启的。之前的查找结果可能无法包括应该已被找到的目录。"

#: find/fstype.c:203
#, c-format
msgid "Cannot read mounted file system list"
msgstr "无法读取挂载文件系统列表"

#: find/fstype.c:250
msgid "unknown"
msgstr "未知"

#: find/ftsfind.c:290
#, c-format
msgid "File system loop detected; %s is part of the same file system loop as %s."
msgstr "探测到文件系统循环；%s 是与 %s 相同的文件系统循环的一部分。"

#: find/ftsfind.c:483 find/util.c:211
#, c-format
msgid "WARNING: file %s appears to have mode 0000"
msgstr "警告: 文件 %s 的权限看上去为 0000"

#: find/ftsfind.c:616
#, c-format
msgid "cannot search %s"
msgstr "无法查找 %s"

#: find/ftsfind.c:635
#, c-format
msgid "failed to restore working directory after searching %s"
msgstr "无法在查寻 %s 后还原工作目录"

#: find/parser.c:471
#, c-format
msgid "The -delete action atomatically turns on -depth, but -prune does nothing when -depth is in effect.  If you want to carry on anyway, just explicitly use the -depth option."
msgstr "-delete 动作自动开启了 -depth 选项，但当 -depth 起作用时 -prune 就没什么用了。如果您真想继续运行，就请明确使用 -depth 选项。"

#: find/parser.c:618
#, c-format
msgid "warning: you have specified the %s option after a non-option argument %s, but options are not positional (%s affects tests specified before it as well as those specified after it).  Please specify options before other arguments.\n"
msgstr "警告: 您在非选项参数 %2$s 后定义了 %1$s 选项，但选项不是位置选项 (%3$s 影响在它之前或之后的指定的比较测试)。请在其它参数之前指定选项。\n"

#: find/parser.c:914
#, c-format
msgid "warning: the -d option is deprecated; please use -depth instead, because the latter is a POSIX-compliant feature."
msgstr "警告: 不赞成使用 -d 选项；请使用 -depth 代替，因为后者更符合 POSIX 特性。"

#: find/parser.c:1184
#, c-format
msgid "%s is not the name of an existing group and it does not look like a numeric group ID because it has the unexpected suffix %s"
msgstr "%s 不是已存在用户组的名称并且它看起来不像是个数字组 ID，因为它有个非预期的后缀 %s"

#: find/parser.c:1199
#, c-format
msgid "%s is not the name of an existing group"
msgstr "%s 不是已存在用户组的名称"

#: find/parser.c:1205
#, c-format
msgid "argument to -group is empty, but should be a group name"
msgstr "-group 的参数列表为空，但应该给出一个用户组名"

#: find/parser.c:1227
msgid ""
"\n"
"default path is the current directory; default expression is -print\n"
"expression may consist of: operators, options, tests, and actions:\n"
msgstr ""
"\n"
"默认路径为当前目录；默认表达式为 -print\n"
"表达式可能由下列成份组成：操作符、选项、测试表达式以及动作：\n"

#: find/parser.c:1230
msgid ""
"operators (decreasing precedence; -and is implicit where no others are given):\n"
"      ( EXPR )   ! EXPR   -not EXPR   EXPR1 -a EXPR2   EXPR1 -and EXPR2\n"
"      EXPR1 -o EXPR2   EXPR1 -or EXPR2   EXPR1 , EXPR2\n"
msgstr ""
"操作符 (优先级递减；未做任何指定时默认使用 -and):\n"
"      ( EXPR )   ! EXPR   -not EXPR   EXPR1 -a EXPR2   EXPR1 -and EXPR2\n"
"      EXPR1 -o EXPR2   EXPR1 -or EXPR2   EXPR1 , EXPR2\n"

#: find/parser.c:1234
msgid ""
"positional options (always true): -daystart -follow -regextype\n"
"\n"
"normal options (always true, specified before other expressions):\n"
"      -depth --help -maxdepth LEVELS -mindepth LEVELS -mount -noleaf\n"
"      --version -xdev -ignore_readdir_race -noignore_readdir_race\n"
msgstr ""
"位置选项 (总是真): -daystart -follow -regextype\n"
"\n"
"普通选项 (总是真，在其它表达式前指定):\n"
"      -depth --help -maxdepth LEVELS -mindepth LEVELS -mount -noleaf\n"
"      --version -xdev -ignore_readdir_race -noignore_readdir_race\n"

#: find/parser.c:1239
msgid ""
"tests (N can be +N or -N or N): -amin N -anewer FILE -atime N -cmin N\n"
"      -cnewer FILE -ctime N -empty -false -fstype TYPE -gid N -group NAME\n"
"      -ilname PATTERN -iname PATTERN -inum N -iwholename PATTERN -iregex PATTERN\n"
"      -links N -lname PATTERN -mmin N -mtime N -name PATTERN -newer FILE"
msgstr ""
"比较测试 (N 可以是 +N 或 -N 或 N): -amin N -anewer FILE -atime N -cmin N\n"
"      -cnewer 文件 -ctime N -empty -false -fstype 类型 -gid N -group 名称\n"
"      -ilname 匹配模式 -iname 匹配模式 -inum N -ipath 匹配模式 -iregex 匹配模式\n"
"      -links N -lname 匹配模式 -mmin N -mtime N -name 匹配模式 -newer 文件"

#: find/parser.c:1244
msgid ""
"      -nouser -nogroup -path PATTERN -perm [+-]MODE -regex PATTERN\n"
"      -readable -writable -executable\n"
"      -wholename PATTERN -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
"      -used N -user NAME -xtype [bcdpfls]"
msgstr ""
"      -nouser -nogroup -path 匹配模式 -perm [+-]访问模式 -regex 匹配模式\n"
"      -readable -writable -executable\n"
"      -wholename 匹配模式 -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
"      -used N -user 用户名 -xtype [bcdpfls]"

#: find/parser.c:1249
msgid "      -context CONTEXT\n"
msgstr "      -context 文本\n"

#: find/parser.c:1251
msgid ""
"\n"
"actions: -delete -print0 -printf FORMAT -fprintf FILE FORMAT -print \n"
"      -fprint0 FILE -fprint FILE -ls -fls FILE -prune -quit\n"
"      -exec COMMAND ; -exec COMMAND {} + -ok COMMAND ;\n"
"      -execdir COMMAND ; -execdir COMMAND {} + -okdir COMMAND ;\n"
msgstr ""
"\n"
"操作: -delete -print0 -printf 格式 -fprintf 文件 格式 -print \n"
"      -fprint0 文件 -fprint 文件 -ls -fls 文件 -prune -quit\n"
"      -exec 命令 ; -exec 命令 {} + -ok 命令 ;\n"
"      -execdir 命令 ; -execdir 命令 {} + -okdir 命令 ;\n"

#: find/parser.c:1257
msgid ""
"Report (and track progress on fixing) bugs via the findutils bug-reporting\n"
"page at http://savannah.gnu.org/ or, if you have no web access, by sending\n"
"email to <bug-findutils@gnu.org>."
msgstr "通过 findutils 错误报告页 http://savannah.gnu.org/ 报告错误及跟踪修定过程。如果您无法浏览网页，请发电子邮件至 <bug-findutils@gnu.org>。"

#: find/parser.c:1312
#, c-format
msgid "sanity check of the fnmatch() library function failed."
msgstr "fnmatch() 库函数的健全性检测失败了。"

#: find/parser.c:1326
#, c-format
msgid "warning: Unix filenames usually don't contain slashes (though pathnames do).  That means that '%s %s' will probably evaluate to false all the time on this system.  You might find the '-wholename' test more useful, or perhaps '-samefile'.  Alternatively, if you are using GNU grep, you could use 'find ... -print0 | grep -FzZ %s'."
msgstr "警告: Unix 文件名通常不包括 / 符号(但目录名中有这个符号)。这意味着‘%s %s’可能在此系统中永远等同于错误。您可能会发现‘-wholename’参数更有效，或者也许是‘-samefile’。又或者，如果您使用 GNU grep，您可使用‘find ... -print0 | grep -FzZ %s’。"

#: find/parser.c:1452
#, c-format
msgid "Expected a positive decimal integer argument to %s, but got %s"
msgstr "本应对 %s 使用一个十进制的正整数作为参数，但却使用了 %s"

#: find/parser.c:1617
#, c-format
msgid "This system does not provide a way to find the birth time of a file."
msgstr "此系统未提供查找文件生成时间的方法。"

#: find/parser.c:1638
#, c-format
msgid "The %s test needs an argument"
msgstr "%s 测试需要参数"

#: find/parser.c:1675
#, c-format
msgid "I cannot figure out how to interpret %s as a date or time"
msgstr "我无法找到将 %s 解释为日期或时间的方法"

#: find/parser.c:1692
#, c-format
msgid "Cannot obtain birth time of file %s"
msgstr "无法获得文件 %s 的生成时间"

#: find/parser.c:1900
#, c-format
msgid "warning: -%s %s will not match anything because it ends with /."
msgstr "警告: -%s 由于 %s 以 / 结尾因此无法匹配任何内容。"

#: find/parser.c:1956
#, c-format
msgid "Mode %s is not valid when POSIXLY_CORRECT is on."
msgstr "当开启 POSIXLY_CORRECT 时模式 %s 无效。"

#: find/parser.c:2039
#, c-format
msgid "invalid mode %s"
msgstr "非法权限 %s"

#: find/parser.c:2058
#, c-format
msgid "warning: you have specified a mode pattern %s (which is equivalent to /000). The meaning of -perm /000 has now been changed to be consistent with -perm -000; that is, while it used to match no files, it now matches all files."
msgstr "警告: 您已经指定了一个权限字串 %s(它等同于 /000)。-perm /000 的意思现在已被更改至与 -perm 000 一致了；那即是说，以前它不匹配任何文件，而现在它匹配所有文件。"

#: find/parser.c:2274
#, c-format
msgid "invalid null argument to -size"
msgstr "-size 的 null 参数无效"

#: find/parser.c:2323
#, c-format
msgid "invalid -size type `%c'"
msgstr "无效的 -size 类型“%c”"

#: find/parser.c:2329
#, c-format
msgid "Invalid argument `%s%c' to -size"
msgstr "-size 的参数‘%s%c’无效"

#: find/parser.c:2511
msgid "The -show-control-chars option takes a single argument which must be 'literal' or 'safe'"
msgstr "-show-control-chars 选项仅带一个参数，它必须是‘literal’或‘safe’"

#: find/parser.c:2625
#, c-format
msgid "Invalid argument %s to -used"
msgstr "-used 的参数 %s 无效"

#: find/parser.c:2666
#, c-format
msgid "%s is not the name of a known user"
msgstr "用户名 %s 未知"

#: find/parser.c:2673
#, c-format
msgid "The argument to -user should not be empty"
msgstr "-user 选项的参数不可以为空"

#: find/parser.c:2698
#, c-format
msgid "Features enabled: "
msgstr "开启的特性: "

#: find/parser.c:2775
#, c-format
msgid "invalid predicate -context: SELinux is not enabled."
msgstr "-context 中的文本内容非法: SELinux 未开启。"

#: find/parser.c:2839
#, c-format
msgid "Arguments to -type should contain only one letter"
msgstr "-type 的参数应当仅包含一个字母"

#: find/parser.c:2888
#, c-format
msgid "Unknown argument to -type: %c"
msgstr "-type 的参数未知: %c"

#: find/parser.c:3010
#, c-format
msgid "warning: unrecognized escape `\\%c'"
msgstr "敬告：无法识别的转义字符“\\%c”"

#: find/parser.c:3027
#, c-format
msgid "error: %s at end of format string"
msgstr "错误: %s 位于格式字符串的末尾"

#: find/parser.c:3066
#, c-format
msgid "warning: unrecognized format directive `%%%c'"
msgstr "警告：不可识别的格式指令“%%%c”"

#: find/parser.c:3220
#, c-format
msgid "error: the format directive `%%%c' is reserved for future use"
msgstr "错误: 格式指令‘%%%c’是留给将来使用的。"

#: find/parser.c:3255
#, c-format
msgid "The current directory is included in the PATH environment variable, which is insecure in combination with the %s action of find.  Please remove the current directory from your $PATH (that is, remove \".\" or leading or trailing colons)"
msgstr "当前目录包含在了 PATH 环境变量中，与 find 的 %s 动作合用时不安全。请从您的 $PATH 变量中删除当前目录(即删除“.”或冒号前面或后面的东西)"

#: find/parser.c:3267
#, c-format
msgid "The relative path %s is included in the PATH environment variable, which is insecure in combination with the %s action of find.  Please remove that entry from $PATH"
msgstr "相对路径 %s 包含在了 PATH 环境变量中，与 find 的 %s 动作合用时不安全。请从 $PATH 变量中删除那个条目"

#: find/parser.c:3371
#, c-format
msgid "You may not use {} within the utility name for -execdir and -okdir, because this is a potential security problem."
msgstr "您不可以在 -execdir 和 -okdir 中使用 {}，因为这会带来潜在的安全问题。"

#: find/parser.c:3396
#, c-format
msgid "Only one instance of {} is supported with -exec%s ... +"
msgstr "-exec%s ... + 仅支持一个 {} 实例"

#: find/parser.c:3413
#, c-format
msgid "The environment is too large for exec()."
msgstr "对 exec() 操作来说执行环境过大。"

#: find/parser.c:3593
#, c-format
msgid "arithmetic overflow while converting %s days to a number of seconds"
msgstr "将 %s 天换算为秒数时出现算术溢出"

#: find/parser.c:3617
#, c-format
msgid "arithmetic overflow when trying to calculate the end of today"
msgstr "尝试计算本日终止时刻时出现算术溢出"

#: find/parser.c:3776
msgid "standard error"
msgstr "标准错误"

#: find/parser.c:3781
msgid "standard output"
msgstr "标准输出"

#: find/pred.c:429
#, c-format
msgid "cannot delete %s"
msgstr "无法删除 %s"

#: find/pred.c:1084 find/pred.c:1918
#, c-format
msgid "getfilecon failed: %s"
msgstr "getfilecon 失败: %s"

#: find/pred.c:1403
#, c-format
msgid "WARNING: cannot determine birth time of file %s"
msgstr "警告: 无法确定文件 %s 的生成时间"

#: find/pred.c:1467
#, c-format
msgid "< %s ... %s > ? "
msgstr "< %s ... %s > ? "

#: find/pred.c:1958
#, c-format
msgid "Cannot close standard input"
msgstr "无法关闭标准输入"

#: find/pred.c:1993
#, c-format
msgid "Failed to change directory"
msgstr "无法更改目录"

#: find/pred.c:2031 xargs/xargs.c:1111
#, c-format
msgid "cannot fork"
msgstr "无法 fork"

#: find/pred.c:2062
#, c-format
msgid "error waiting for %s"
msgstr "等待 %s 时出错"

#: find/pred.c:2071
#, c-format
msgid "%s terminated by signal %d"
msgstr "%s 由于信号 %d 而终止"

#: find/tree.c:124 find/tree.c:129 find/tree.c:219 find/tree.c:258
#, c-format
msgid "invalid expression"
msgstr "非法表达式"

#: find/tree.c:135
#, c-format
msgid "invalid expression; you have used a binary operator '%s' with nothing before it."
msgstr "非法表达式；您在一个二元操作符‘%s’前未带任何东西。"

#: find/tree.c:146
#, c-format
msgid "expected an expression between '%s' and ')'"
msgstr "在‘%s’和‘)’之间需要一个表达式"

#: find/tree.c:156
#, c-format
msgid "expected an expression after '%s'"
msgstr "在‘%s’后需要一个表达式"

#: find/tree.c:161
#, c-format
msgid "invalid expression; you have too many ')'"
msgstr "非法表达式；您使用了太多的‘)’"

#: find/tree.c:184
#, c-format
msgid "invalid expression; expected to find a ')' but didn't see one.  Perhaps you need an extra predicate after '%s'"
msgstr "非法表达式；需要一个‘)’但未找到。也许您需要在‘%s’后加上额外的判定"

#: find/tree.c:192
#, c-format
msgid "invalid expression; empty parentheses are not allowed."
msgstr "非法表达式；不允许使用空白的圆括号。"

#: find/tree.c:198
#, c-format
msgid "invalid expression; I was expecting to find a ')' somewhere but did not see one."
msgstr "非法表达式；我原来希望能在某处找到‘)’，但未找到。"

#: find/tree.c:204 find/tree.c:838
#, c-format
msgid "oops -- invalid expression type!"
msgstr "哎呀 -- 无效的表达式类型！"

#: find/tree.c:276
#, c-format
msgid "oops -- invalid expression type (%d)!"
msgstr "哎 -- 无效的表达式类型(%d)！"

#: find/tree.c:1288
#, c-format
msgid "paths must precede expression: %s"
msgstr "路径必须在表达式之前: %s"

#: find/tree.c:1297
#, c-format
msgid "unknown predicate `%s'"
msgstr "未知的断言“%s”"

#: find/tree.c:1317
#, c-format
msgid "invalid predicate `%s'"
msgstr "无效断言“%s”"

#: find/tree.c:1322
#, c-format
msgid "invalid argument `%s' to `%s'"
msgstr "“%2$s”的无效参数“%1$s”"

#: find/tree.c:1330
#, c-format
msgid "missing argument to `%s'"
msgstr "遗漏“%s”的参数"

#: find/tree.c:1406
#, c-format
msgid "you have too many ')'"
msgstr "您使用了太多的‘)’"

#: find/tree.c:1412
#, c-format
msgid "unexpected extra predicate '%s'"
msgstr "非预期的无效断言“%s”"

#: find/tree.c:1414
#, c-format
msgid "unexpected extra predicate"
msgstr "非预期的无效断言"

#: find/tree.c:1547
#, fuzzy, c-format
msgid "oops -- invalid default insertion of and!"
msgstr "哎 -- 无效的默认插入！"

#: find/util.c:168
#, c-format
msgid "Usage: %s [-H] [-L] [-P] [-Olevel] [-D "
msgstr "用法: %s [-H] [-L] [-P] [-Olevel] [-D "

#: find/util.c:170
#, c-format
msgid "] [path...] [expression]\n"
msgstr "] [path...] [expression]\n"

#: find/util.c:809
#, c-format
msgid "Ignoring unrecognised debug flag %s"
msgstr "忽略不可识别的调试标记 %s"

#: find/util.c:816
#, c-format
msgid "Empty argument to the -D option."
msgstr "-D 选项的参数列表为空"

#: find/util.c:832
#, c-format
msgid "The -O option must be immediately followed by a decimal integer"
msgstr "-O 选项后面必须立即带上一个十进制整数"

#: find/util.c:842 find/util.c:853
#, c-format
msgid "Please specify a decimal number immediately after -O"
msgstr "请在 -O 选项后面立即指定一个十进制数"

#: find/util.c:858 find/util.c:863
#, c-format
msgid "Invalid optimisation level %s"
msgstr "无效的优化级 %s"

#: find/util.c:871
#, c-format
msgid "Optimisation level %lu is too high.  If you want to find files very quickly, consider using GNU locate."
msgstr "优化级别 %lu 太高了。如果您想很快地找到文件，考虑使用 GNU locate。"

#: find/util.c:1015
#, c-format
msgid "The environment variable FIND_BLOCK_SIZE is not supported, the only thing that affects the block size is the POSIXLY_CORRECT environment variable"
msgstr "不支持环境变量 FIND_BLOCK_SIZE，仅环境变量 POSIXLY_CORRECT 会影响块大小"

#: lib/buildcmd.c:177
#, c-format
msgid "command too long"
msgstr "命令过长"

#: lib/buildcmd.c:317
#, c-format
msgid "can't call exec() due to argument size restrictions"
msgstr "由于参数数量限制，无法调用 exec()"

#: lib/buildcmd.c:387
#, c-format
msgid "can not fit single argument within argument list size limit"
msgstr "无法使用合适的带参数列表大小限制的单一参数"

#: lib/buildcmd.c:393
#, c-format
msgid "argument list too long"
msgstr "参数列表过长"

#: lib/buildcmd.c:676
#, c-format
msgid "Environment variable %s is not set to a valid decimal number"
msgstr "环境变量 %s 未设为一个有效十进制数"

#: lib/findutils-version.c:60
msgid "Eric B. Decker"
msgstr "Eric B. Decker"

#: lib/findutils-version.c:61
msgid "James Youngman"
msgstr "James Youngman"

#: lib/findutils-version.c:62
msgid "Kevin Dalley"
msgstr "Kevin Dalley"

#: lib/findutils-version.c:64
#, c-format
msgid "Built using GNU gnulib version %s\n"
msgstr "以 GNU gnulib 版本 %s 构建\n"

#: lib/safe-atoi.c:76
#, c-format
msgid "Unexpected suffix %s on %s"
msgstr "在 %2$s 中有非预期的后缀 %1$s"

#: lib/safe-atoi.c:82
#, c-format
msgid "Expected an integer: %s"
msgstr "需要一个整数: %s"

#: lib/regextype.c:107
#, c-format
msgid "Unknown regular expression type %s; valid types are %s."
msgstr "未知的正则表达式类型 %s；合法的类型是 %s。"

#: locate/code.c:130
#, c-format
msgid ""
"Usage: %s [--version | --help]\n"
"or     %s most_common_bigrams < file-list > locate-database\n"
msgstr ""
"用法: %s [--version | --help]\n"
"or     %s most_common_bigrams < file-list > locate-database\n"

#: locate/code.c:134 locate/frcode.c:164 locate/locate.c:1415
#: xargs/xargs.c:1467
msgid ""
"\n"
"Report bugs to <bug-findutils@gnu.org>.\n"
msgstr ""
"\n"
"将错误报告发送到 <bug-findutils@gnu.org>。\n"

#: locate/code.c:152 locate/frcode.c:212
#, c-format
msgid "write error"
msgstr "写入错误"

#: locate/frcode.c:162
#, c-format
msgid "Usage: %s [-0 | --null] [--version] [--help]\n"
msgstr "用法: %s [-0 | --null] [--version] [--help]\n"

#: locate/frcode.c:182
#, c-format
msgid "You need to specify a security level as a decimal integer."
msgstr "您需要以十进制整数指定一个安全级别"

#: locate/frcode.c:190
#, c-format
msgid "Security level %s is outside the convertible range."
msgstr "安全级 %s 超出可转换范围"

#: locate/frcode.c:198
#, c-format
msgid "Security level %s has unexpected suffix %s."
msgstr "安全级 %s 有非预期的后缀 %s。"

#: locate/frcode.c:256
#, c-format
msgid "slocate security level %ld is unsupported."
msgstr "不支持 slocate 安全级 %ld。"

#: locate/frcode.c:294
#, c-format
msgid "Failed to write to standard output"
msgstr "无法写入标准输出"

#: locate/locate.c:148
msgid "days"
msgstr "天"

#: locate/locate.c:195
#, c-format
msgid "The argument for option --max-database-age must not be empty"
msgstr "--max-database-age 选项的参数不允为空"

#: locate/locate.c:211 locate/locate.c:218
#, c-format
msgid "Invalid argument %s for option --max-database-age"
msgstr "--max-database-age 选项的参数 %s 无效"

#: locate/locate.c:470
#, c-format
msgid "locate database %s contains a filename longer than locate can handle"
msgstr "locate 数据库 %s 包含一个比 locate 所能处理的文件名更长的文件名`"

#: locate/locate.c:605
#, c-format
msgid "locate database %s is corrupt or invalid"
msgstr "locate 数据库 %s 损坏或无效"

#: locate/locate.c:895
#, c-format
msgid "Locate database size: %s byte\n"
msgid_plural "Locate database size: %s bytes\n"
msgstr[0] "Locate 数据库大小: %s 字节\n"

#: locate/locate.c:902
#, c-format
msgid "Matching Filenames: %s\n"
msgstr "正在匹配文件名: %s\n"

#: locate/locate.c:903
#, c-format
msgid "All Filenames: %s\n"
msgstr "所有文件名: %s\n"

#: locate/locate.c:909
#, c-format
msgid ""
"File names have a cumulative length of %s bytes.\n"
"Of those file names,\n"
"\n"
"\t%s contain whitespace, \n"
"\t%s contain newline characters, \n"
"\tand %s contain characters with the high bit set.\n"
msgstr ""
"文件名累计长度 %s 字节。\n"
"在那些文件名中，\n"
"\n"
"\t包括空格 %s 个，\n"
"\t空行 %s 个，\n"
"\t以及带有高字节位设置的字符 %s 个。\n"

#: locate/locate.c:923
#, c-format
msgid "Some filenames may have been filtered out, so we cannot compute the compression ratio.\n"
msgstr "某些文件名可能被过滤掉了，因此我们无法计算压缩率。\n"

#: locate/locate.c:936
#, c-format
msgid "Compression ratio %4.2f%% (higher is better)\n"
msgstr "压缩率 %4.2f%% (越高越好)\n"

#: locate/locate.c:943
#, c-format
msgid "Compression ratio is undefined\n"
msgstr "压缩率未定义\n"

#: locate/locate.c:998
#, c-format
msgid "locate database %s looks like an slocate database but it seems to have security level %c, which GNU findutils does not currently support"
msgstr "locate 数据库 %s 看上去像是个 slocate 数据库，但它好像有安全级 %c，而目前 GNU findutils 不支持此安全级"

#: locate/locate.c:1115
#, c-format
msgid "%s is an slocate database.  Support for these is new, expect problems for now."
msgstr "%s 是一个 slocate 数据库。这些支持都是新开发的，目前希望能提交错误报告。"

#: locate/locate.c:1129
#, c-format
msgid "%s is an slocate database of unsupported security level %d; skipping it."
msgstr "%s 是一个不支持的安全级为 %d 的 slocate 数据库；跳过。"

#: locate/locate.c:1146
#, c-format
msgid "You specified the -E option, but that option cannot be used with slocate-format databases with a non-zero security level.  No results will be generated for this database.\n"
msgstr "您指定了 -E 选项，但那个选项无法和带非零安全级的 slocate 格式的数据库一同使用。此数据库不会生成任何结果。\n"

#: locate/locate.c:1157
#, c-format
msgid "%s is an slocate database.  Turning on the '-e' option."
msgstr "%s 是一个 slocate 数据库。开启‘-e’选项。"

#: locate/locate.c:1195
#, c-format
msgid "Old-format locate database %s is too short to be valid"
msgstr "旧格式的 locate 数据库 %s 太短因而无效"

#: locate/locate.c:1347
#, c-format
msgid "Database %s is in the %s format.\n"
msgstr "数据库 %s 的格式为 %s。\n"

#: locate/locate.c:1368
msgid "The database has little-endian machine-word encoding.\n"
msgstr "数据库是 little-endian 编码的。\n"

#: locate/locate.c:1370
msgid "The database has big-endian machine-word encoding.\n"
msgstr "数据库是 big-endian 编码的。\n"

#: locate/locate.c:1383
#, c-format
msgid "The database machine-word encoding order is not obvious.\n"
msgstr "数据库编码方式不明显。\n"

#: locate/locate.c:1406
#, c-format
msgid ""
"Usage: %s [-d path | --database=path] [-e | -E | --[non-]existing]\n"
"      [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
"      [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
"      [-P | -H | --nofollow] [-L | --follow] [-m | --mmap] [-s | --stdio]\n"
"      [-A | --all] [-p | --print] [-r | --regex] [--regextype=TYPE]\n"
"      [--max-database-age D] [--version] [--help]\n"
"      pattern...\n"
msgstr ""
"用法: %s [-d path | --database=path] [-e | -E | --[non-]existing]\n"
"      [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
"      [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
"      [-P | -H | --nofollow] [-L | --follow] [-m | --mmap ] [ -s | --stdio ]\n"
"      [-A | --all] [-p | --print] [-r | --regex ] [--regextype=TYPE]\n"
"      [--max-database-age D] [--version] [--help]\n"
"      pattern...\n"

#: locate/locate.c:1469
msgid "failed to drop group privileges"
msgstr "无法放弃组特权"

#: locate/locate.c:1487
msgid "failed to drop setuid privileges"
msgstr "无法放弃 setuid 特权"

#: locate/locate.c:1501
msgid "Failed to fully drop privileges"
msgstr "无法完全放弃特权"

#: locate/locate.c:1519
msgid "failed to drop setgid privileges"
msgstr "无法放弃 setgid 特权"

#: locate/locate.c:1789
#, c-format
msgid "warning: the locate database can only be read from stdin once."
msgstr "警告: locate 数据库仅能从标准输入读取一次。"

#: locate/locate.c:1851
#, c-format
msgid "time system call failed"
msgstr "时间系统调用失败"

#: locate/locate.c:1862
#, c-format
msgid "warning: database %s is more than %d %s old (actual age is %.1f %s)"
msgstr "警告: 数据库“%s”比 %d %s 还陈旧(实际时间 %.1f %s)"

#: locate/word_io.c:96
#, c-format
msgid "WARNING: locate database %s was built with a different byte order"
msgstr "警告: locate 数据库 %s 以不同的字节顺序构建"

#: locate/word_io.c:143
#, c-format
msgid "unexpected EOF in %s"
msgstr "在 %s 中有非预期的 EOF"

#: locate/word_io.c:146
#, c-format
msgid "error reading a word from %s"
msgstr "从 %s 中读取单词时出错"

#: xargs/xargs.c:265
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification."
msgstr "在输入分隔定义中有无效转义序列 %s。"

#: xargs/xargs.c:283
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification; character values must not exceed %lx."
msgstr "在输入分隔定义中有无效的转义序列 %s；字符值不能超过 %lx。"

#: xargs/xargs.c:289
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification; character values must not exceed %lo."
msgstr "在输入分隔定义中有无效的转义序列 %s；字符值不能超过 %lo。"

#: xargs/xargs.c:298
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification; trailing characters %s not recognised."
msgstr "在输入分隔定义中有无效的转义序列 %s；不可识别后续字符 %s。"

#: xargs/xargs.c:343
#, c-format
msgid "Invalid input delimiter specification %s: the delimiter must be either a single character or an escape sequence starting with \\."
msgstr "无效的输入分隔定义 %s: 分隔符要么是单一字符要么是以 \\ 开始的转义序列。"

#: xargs/xargs.c:360
#, c-format
msgid "environment is too large for exec"
msgstr "对 exec 来说环境过大"

#: xargs/xargs.c:567
#, c-format
msgid "warning: value %ld for -s option is too large, using %ld instead"
msgstr "警告: -s 选项的值 %ld 太大了，用 %ld 代替"

#: xargs/xargs.c:637
#, c-format
msgid "Cannot open input file %s"
msgstr "无法打开输入文件 %s"

#: xargs/xargs.c:655
#, c-format
msgid "Your environment variables take up %<PRIuMAX> bytes\n"
msgstr "您的环境变量占有 %<PRIuMAX> 个字节\n"

#: xargs/xargs.c:658
#, c-format
msgid "POSIX upper limit on argument length (this system): %<PRIuMAX>\n"
msgstr "此系统的参数长度 POSIX 上限: %<PRIuMAX>\n"

#: xargs/xargs.c:661
#, c-format
msgid "POSIX smallest allowable upper limit on argument length (all systems): %<PRIuMAX>\n"
msgstr "所有系统中所允许的最小参数长度 POSIX 上限: %<PRIuMAX>\n"

#: xargs/xargs.c:664
#, c-format
msgid "Maximum length of command we could actually use: %<PRIuMAX>\n"
msgstr "我们实际能用的最大命令长度: %<PRIuMAX>\n"

#: xargs/xargs.c:667
#, c-format
msgid "Size of command buffer we are actually using: %<PRIuMAX>\n"
msgstr "我们实际能用的命令缓冲区的大小: %<PRIuMAX>\n"

#: xargs/xargs.c:673
#, c-format
msgid ""
"\n"
"Execution of xargs will continue now, and it will try to read its input and run commands; if this is not what you wanted to happen, please type the end-of-file keystroke.\n"
msgstr ""
"\n"
"xargs 中的命令现在将继续执行，并且它会尝试读取输入并运行命令；如果您不想它发生，请按下“文件结束”按键(ctrl-D)。\n"

#: xargs/xargs.c:681
#, c-format
msgid "Warning: %s will be run at least once.  If you do not want that to happen, then press the interrupt keystroke.\n"
msgstr "警告: %s 将至少运行一次。如果您不想它发生，请按下中断按键。(ctrl-C)\n"

#: xargs/xargs.c:809 xargs/xargs.c:902
#, c-format
msgid "unmatched %s quote; by default quotes are special to xargs unless you use the -0 option"
msgstr "未匹配的 %s 引用；默认情况下，引用是针对 xargs 的，除非您使用了 -0 选项"

#: xargs/xargs.c:810 xargs/xargs.c:903
msgid "double"
msgstr "双"

#: xargs/xargs.c:810 xargs/xargs.c:903
msgid "single"
msgstr "单"

#: xargs/xargs.c:922
#, c-format
msgid "WARNING: a NUL character occurred in the input.  It cannot be passed through in the argument list.  Did you mean to use the --null option?"
msgstr "警告: 输入中有个 NUL 字符。它不能在参数列表中传送。您是想用 --null 选项吗？"

#: xargs/xargs.c:932 xargs/xargs.c:989
#, c-format
msgid "argument line too long"
msgstr "参数行过长"

#: xargs/xargs.c:1017
#, c-format
msgid "failed to open /dev/tty for reading"
msgstr "无法打开 /dev/tty 用于读取"

#: xargs/xargs.c:1100
#, c-format
msgid "could not create pipe before fork"
msgstr "无法在派生子进程之前创建管道"

#: xargs/xargs.c:1169
#, c-format
msgid "errno-buffer read failed in xargs_do_exec (this is probably a bug, please report it)"
msgstr "xargs_do_exec 中的 errno-buffer 读取失败(这可能是个 bug，请报告给我们)"

#: xargs/xargs.c:1222
#, c-format
msgid "read returned unexpected value %d; this is probably a bug, please report it"
msgstr "读取操作返回的是非预期值 %d；这可能是个 bug，请报告给我们"

#: xargs/xargs.c:1312
#, c-format
msgid "error waiting for child process"
msgstr "等待子进程时出错"

#: xargs/xargs.c:1334
#, c-format
msgid "WARNING: Lost track of %d child processes"
msgstr "警告: 失去 %d 子进程的踪迹"

#: xargs/xargs.c:1353
#, c-format
msgid "%s: exited with status 255; aborting"
msgstr "%s：以状态 255 退出；中止"

#: xargs/xargs.c:1356
#, c-format
msgid "%s: stopped by signal %d"
msgstr "%s：因信号 %d 而停止"

#: xargs/xargs.c:1359
#, c-format
msgid "%s: terminated by signal %d"
msgstr "%s：因信号 %d 而终止"

#: xargs/xargs.c:1417
#, c-format
msgid "%s: invalid number for -%c option\n"
msgstr "%s：选项 -%c 的数值无效\n"

#: xargs/xargs.c:1424
#, c-format
msgid "%s: value for -%c option should be >= %ld\n"
msgstr "%s: 选项 -%c 的值必须 >= %ld\n"

#: xargs/xargs.c:1438
#, c-format
msgid "%s: value for -%c option should be < %ld\n"
msgstr "%s: 选项 -%c 的值必须 < %ld\n"

#: xargs/xargs.c:1456
#, c-format
msgid ""
"Usage: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
"       [-E eof-str] [-e[eof-str]]  [--eof[=eof-str]]\n"
"       [-L max-lines] [-l[max-lines]] [--max-lines[=max-lines]]\n"
"       [-I replace-str] [-i[replace-str]] [--replace[=replace-str]]\n"
"       [-n max-args] [--max-args=max-args]\n"
"       [-s max-chars] [--max-chars=max-chars]\n"
"       [-P max-procs]  [--max-procs=max-procs] [--show-limits]\n"
"       [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
"       [--version] [--help] [command [initial-arguments]]\n"
msgstr ""
"用法: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
"       [-E eof-str] [-e[eof-str]]  [--eof[=eof-str]]\n"
"       [-L max-lines] [-l[max-lines]] [--max-lines[=max-lines]]\n"
"       [-I replace-str] [-i[replace-str]] [--replace[=replace-str]]\n"
"       [-n max-args] [--max-args=max-args]\n"
"       [-s max-chars] [--max-chars=max-chars]\n"
"       [-P max-procs]  [--max-procs=max-procs] [--show-limits]\n"
"       [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
"       [--version] [--help] [command [initial-arguments]]\n"

#~ msgid "invalid argument %s for %s"
#~ msgstr "“%2$s”的参数 %1$s 无效"

#~ msgid "ambiguous argument %s for %s"
#~ msgstr "“%2$s”的参数 %1$s 有歧义"

#~ msgid "Valid arguments are:"
#~ msgstr "合法的参数为:"

#~ msgid "error closing file"
#~ msgstr "文件关闭错误"

#~ msgid "Unknown system error"
#~ msgstr "未知的系统错误"

#~ msgid "%s: option `%s' is ambiguous\n"
#~ msgstr "%s：选项“%s”有歧义\n"

#~ msgid "%s: option `--%s' doesn't allow an argument\n"
#~ msgstr "%s：选项“--%s”不接受参数\n"

#~ msgid "%s: option `%c%s' doesn't allow an argument\n"
#~ msgstr "%s：选项“%c%s”不接受参数\n"

#~ msgid "%s: option `%s' requires an argument\n"
#~ msgstr "%s：选项“%s”需要一个参数\n"

#~ msgid "%s: unrecognized option `--%s'\n"
#~ msgstr "%s：无法识别的选项“--%s”\n"

#~ msgid "%s: unrecognized option `%c%s'\n"
#~ msgstr "%s：无法识别的选项“%c%s”\n"

#~ msgid "%s: illegal option -- %c\n"
#~ msgstr "%s：非法选项 -- %c\n"

#~ msgid "%s: invalid option -- %c\n"
#~ msgstr "%s：非法选项 -- %c\n"

#~ msgid "%s: option requires an argument -- %c\n"
#~ msgstr "%s：选项需要一个参数 -- %c\n"

#~ msgid "%s: option `-W %s' is ambiguous\n"
#~ msgstr "%s：选项“-W %s”有二义性\n"

#~ msgid "%s: option `-W %s' doesn't allow an argument\n"
#~ msgstr "%s：选项“-W %s”不接受参数\n"

#~ msgid "unable to record current working directory"
#~ msgstr "无法获取当前工作目录"

#~ msgid "`"
#~ msgstr "“"

#~ msgid "'"
#~ msgstr "”"

#~ msgid "Success"
#~ msgstr "成功"

#~ msgid "No match"
#~ msgstr "没有匹配"

#~ msgid "Invalid regular expression"
#~ msgstr "无效的常规表达式"

#~ msgid "Invalid collation character"
#~ msgstr "无效的校勘字符"

#~ msgid "Invalid character class name"
#~ msgstr "无效的字符类名"

#~ msgid "Trailing backslash"
#~ msgstr "末尾的反斜线"

#~ msgid "Invalid back reference"
#~ msgstr "无效的向后引用"

#~ msgid "Unmatched [ or [^"
#~ msgstr "不匹配的 [ 或 [^"

#~ msgid "Unmatched ( or \\("
#~ msgstr "不匹配的 ( 或 \\("

#~ msgid "Unmatched \\{"
#~ msgstr "不匹配的 \\{"

#~ msgid "Invalid content of \\{\\}"
#~ msgstr "无效的 \\{\\} 的内容"

#~ msgid "Invalid range end"
#~ msgstr "无效的结束范围"

#~ msgid "Memory exhausted"
#~ msgstr "内存耗尽"

#, fuzzy
#~ msgid "Invalid preceding regular expression"
#~ msgstr "无效正则表达式前缀"

#~ msgid "Premature end of regular expression"
#~ msgstr "正则表达式急于结束"

#~ msgid "Regular expression too big"
#~ msgstr "常规表达式过大"

#~ msgid "Unmatched ) or \\)"
#~ msgstr "不匹配的 ) 或 \\)"

#~ msgid "No previous regular expression"
#~ msgstr "没有上一个常规表达式"

#~ msgid "^[yY]"
#~ msgstr "^[yY]"

#~ msgid "^[nN]"
#~ msgstr "^[nN]"

#~ msgid "memory exhausted"
#~ msgstr "内存耗尽"

#~ msgid "invalid %s%s argument `%s'"
#~ msgstr "无效的 %s%s 的参数“%s”"

#~ msgid "invalid suffix in %s%s argument `%s'"
#~ msgstr "%s%s 的参数“%s”有无效后缀"

#~ msgid "%s%s argument `%s' too large"
#~ msgstr "%s%s 的参数“%s”过长"