Krav til maskine:

• Pentium-processor eller kompatibel
• Cdrom-drev
• Mindst 32 Mb RAM, 64 MB er anbefalet

Installation af Mandrakelinux er i de fleste tilfælde blot at indsætte cdrom-en i cdrom-læseren og genstarte din maskine. Se under punkt 1.

---

INFORMATION:

• Hvis du opgraderer fra Mandrakelinux 7.x, 8.x eller 9.x så husk at lave backup af dit system.
• Opgradering fra tidligere version end 7.0 er ikke undstøttet! I dette tilfælde kræves en ny installation, og ikke en opgradering.

---

Nedenfor er en liste af forskellige måder at installere Mandrakelinux på:

1. Start direkte fra cdrom'en
2. Lav en bootdiskette under Windows
3. Øvrige installationsmetoder

For dansk oversættelse af det følgende se tekstudgaven i filen INSTALL.txt.

1. Start direkte fra cdrom

The Installation CDROM is bootable. In most cases, just insert the CD into the drive and reboot the machine. Follow the instructions displayed on screen: press the [Enter] key to start the installation, or press [F1] for additional help.

NOTE:

On some portable computers, the system may not reboot from the CD. If this is the case, you should prepare a boot floppy. See point 2 for details.

[top of this page]

2. Make a boot floppy with Windows

If your computer cannot boot from the CDROM and previous methods do not work, you must make a boot floppy under Windows as follows:

• insert the CDROM, then open the icon "My Computer", right click on the CDROM drive icon and select "Open"
• go into the "dosutils" directory and double-click on the "rawwritewin" icon
• insert a blank floppy in the floppy drive
• select "D:\images\cdrom.img" in the "Image File" field (assuming that your CDROM drive is "D:", otherwise replace "D:" as needed)
• select "A:" in the "Floppy Drive" field then click on "Write".

To begin the installation:

• insert the CDROM in the drive, as well as the boot floppy, then
• restart the computer.

[top of this page]

3. Other installation methods

If for any reason the previous methods do not fit your needs (you want to perform a network install, an install from pcmcia devices or ...), you will also need to make a boot floppy:

• Under Linux (or others modern UNIX systems) type at prompt:
  $ dd if=xxxxx.img of=/dev/fd0
• Under Windows, follow the method described in point 3, but using xxxxx.img (see below) instead of cdrom.img.
• Under DOS, assuming your CD is drive D:, type:
  D:\> dosutils\rawrite.exe -f images\xxxxx.img -d A

Here the liste of boot images:

blank.img is a minimal image to customize kernel installation.

[top of this page]

You can also use a text mode installation if, for any reason, you have trouble with the default graphical installation. To use it, press [F1] at Mandrakelinux welcome screen, then type text at the prompt.

If you need to rescue your existing Mandrakelinux system, insert your Installation CDROM (or any relevant boot floppy), press [F1] at Mandrakelinux welcome screen, then rescue at the prompt.

See http://www.linux-mandrake.com/drakx/README for more technical information.

[top of this page]

Below are the main stages of installation:

1. Insert your Installation CDROM (or Installation Floppy disk if necessary) and restart your machine.
2. Press [Enter] when the Mandrakelinux welcome screen appears and carefully follow the instructions.
3. When the installation is complete take out the CD-ROM when ejected (and any floppy disk if present in drive); your machine will restart. If it does not, restart it manually.
4. Mandrakelinux will start. After bootup, you can login on your machine under the user account setup during install, or as "root".

Important note:

The "root" account will give you unrestricted access to your Linux system. Do not use it except to configure or administer Linux. For every day use, use a normal user account which you can configure with the "userdrake" tool, or with the commands "adduser" and "passwd".

[top of this page]

For installation support see the Mandrakelinux diffusion list and FAQs at the web site:

• http://www.mandrakelinux.com/