Hardware Howto resources
| Nav Bar | Documentation | How-to Classification | Hardware |
|---|
Local resources
Links to Tips and How Tos located in the Forums or in the Wiki at Contribs.org.
- None
External resources
Links to Contribs and How Tos located on the web or in the contribs area. These items have been reported to work on SME v6.x. Your mileage may vary. None of them has been tested by contribs.org, and it is in any case possible for contribs to conflict with each other. It is a good idea to search the site and forums for information about the contrib prior to installation.
CD-CDRW
- None
Hard Disks
- How to add an extra hard disk to a SME server, and (optionally) store the entire /home tree on it.
SCSI
- None
RAID
- None
USB Hard Disk
Other
- Wake-Up-On LAN, to allow wake up of another machine on the LAN
- How to install the Powerswitch module on a SME server.
Additional information
External web sites with general information that may prove useful.
- None
Untested on SME v6.x
How Tos and contribs for SME Server versions earlier than 6.0. These items may very well work with SME v6.x, or perhaps will work with only minor changes, but are not known to do so. If you have any of these working on 6+, we'll be happy to move it - just let us know!
CD-CDRW
- HOWTO Setup Your IDE CDR-RW Drive on SME 5.6
- How To install WebCDwriter On SME 5
- Making the floppy & cdrom drives appear in an ibay and have them automount
Hard Disks
- How to enable hdparm to enable high speed dma access - Enable high speed dma access on your ide hard drive(s)
SCSI
- How to add a second SCSI Host Adapter.
RAID
- How to use an Adaptec RAID Controller with e-smith Server Version 4.1.2
- How to install 3dm and 3ware 6400 card on your e-smith server in a RAID5 configuration
Tape Drive
- How to add a SCSI tape drive and controller after install.
- How to install an IDE Tape drive on e-smith 4.x-SME 5.x
Other
- How to shut down on Ctrl-Alt-Delete - install to make your SME server do a controlled shut down from a 3-finger salute
- The SME/Alpha Homepage
- Installation of the Alcatel SpeedTouch USB modem on e-smith 4.1.2 and SME Server 5
- Comment installer le modem SpeedTouch USB sous SME 5.6
- How to use PCMCIA cards with an e-smith server
- How to manually set network card drivers.
- How to use Winbond-840 based ethernet cards with your Mitel SME server
- Nexland ISB Pro800Turbo How To.
To Be Deleted
To make it easier to use How Tos, we will be removing these deprecated How To pages, and the links to them, from Contribs.org 30 days from the date in parenthesis below. Of course, in many cases the original How To will remain available at its original location. We're just removing the listing here.
- None
| Nav Bar | Documentation | How-to Classification | Hardware |
|---|