Xen 2.0.6 booting on a SME Server 7a16 host:
Linux version 2.6.11.10-xen0 (root@xen) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-49)) #1 Mon May 30 23:09:13 CEST 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000007d00000 (usable) 125MB LOWMEM available. On node 0 totalpages: 32000 DMA zone: 32000 pages, LIFO batch:7 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. IRQ lockup detection disabled Allocating PCI resources starting at 07d00000 (gap: 07d00000:f8300000) Built 1 zonelists Kernel command line: ro root=/dev/md1 console=tty0 Initializing CPU#0 PID hash table entries: 512 (order: 9, 8192 bytes) Xen reported: 1002.283 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) vmalloc area: c8800000-fbef9000, maxmem 34000000 Memory: 121940k/128000k available (3008k kernel code, 5908k reserved, 970k data, 324k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0381b83f 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) CPU: After all inits, caps: 03819131 00000000 00000000 00000000 00000000 000000dd 00000000 CPU: Centaur VIA Nehemiah stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled NET: Registered protocol family 16 PCI: Using configuration type Xen xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup PCI: Via IRQ fixup PCI: Probing PCI hardware (bus 01) PCI: Probing PCI hardware IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com> Initializing Cryptographic API serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?) floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.4) Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2 Copyright (c) 1999-2004 Intel Corporation. pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker PCI: Obtained IRQ 11 for device 0000:00:0f.0 eth0: VIA Rhine III at 0x1d000, 00:40:63:db:ff:1c, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 40a1. PCI: Obtained IRQ 12 for device 0000:00:12.0 eth1: VIA Rhine II at 0x1e800, 00:40:63:db:ff:08, IRQ 12. eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. Xen virtual console successfully installed as ttyS Event-channel device installed. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: HTS424020M9AT00, ATA DISK drive Probing IDE interface ide1... hdc: CD-224E, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 39070080 sectors (20003 MB) w/1739KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 Red Hat/Adaptec aacraid driver (1.1.2-lk2 May 30 2005) 3ware Storage Controller device driver for Linux v1.26.02.000. libata version 1.10 loaded. Fusion MPT base driver 3.01.18 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.18 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 PCI: Obtained IRQ 12 for device 0000:00:10.0 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 12, io base 0xd400 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Obtained IRQ 11 for device 0000:00:10.1 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 11, io base 0xd800 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Obtained IRQ 9 for device 0000:00:10.2 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 9, io base 0xdc00 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1341.600 MB/sec raid5: using function: pIII_sse (1341.600 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered md: Autodetecting RAID arrays. md: autorun ... md: considering hda3 ... md: adding hda3 ... md: hda2 has different UUID to hda3 md: hda1 has different UUID to hda3 md: created md1 md: bind<hda3> md: running: <hda3> raid1: raid set md1 active with 1 out of 2 mirrors md: considering hda2 ... md: adding hda2 ... md: hda1 has different UUID to hda2 md: created md2 md: bind<hda2> md: running: <hda2> raid1: raid set md2 active with 1 out of 2 mirrors md: considering hda1 ... md: adding hda1 ... md: created md0 md: bind<hda1> md: running: <hda1> raid1: raid set md0 active with 1 out of 2 mirrors md: ... autorun DONE. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 324k freed kjournald starting. Commit interval 5 seconds EXT3 FS on md1, internal journal Adding 264952k swap on /dev/md2. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link up, 100Mbps, half-duplex, lpa 0x40A1